dudleyar
Newbie
Offline
Activity: 7
Merit: 0
|
|
November 24, 2016, 03:27:45 PM |
|
Getting 860 H/s overall 4 x RX480 8GB Sapphire Nitro+ Core GPU 1400MHz Memory 2100, getting roughly 215 H/s per card, Thanks Claymore
any undervolt? what is wall power? I don't actually pay for my Electricity, and have never measured it to be honest, I have a 1600Watt Modular PSU, so unfortunately I can't answer you that Question
|
|
|
|
Lerrcey
Newbie
Offline
Activity: 53
Merit: 0
|
|
November 24, 2016, 03:29:55 PM Last edit: November 24, 2016, 03:43:27 PM by Lerrcey |
|
In version 7 I was having an issue with one card only working at half strength (vs 17 identical cards)
Now in version 8; that card is completely zero'd and crashing the machine if left in the config. The card works fine, and at full strength, when using any other Claymore miner, just this ZCash one that it doesn't like.
Anyone got any suggestions?
try running a instance of the miner just for it. if this works run another instance (so two zecminer running at the same time) for the rest of the cards and see what happens then. Tried. I isolated the card, then tested out all the overclocks, underclocks, resets, the works to rule them out. I then tried replacing the riser in case it was hardware but nothing seems to get this card to work with V8. and with V7, it was only working at half strength. I have an identical machine next to it (with a much lower ASIC quality across the cards) that is absolutely eating up the hash rate atm (1150H/s) http://imgur.com/REh98vtTop machine is all 480 4GB Asus version Bottom 3 are ALL 480 Sapphire Nitro+ 8GB - Figures off to the right are their ASIC scores. That one card kills the machine in <2 minutes if I leave it in the config.
|
|
|
|
giagge
Legendary
Offline
Activity: 1134
Merit: 1001
|
|
November 24, 2016, 03:30:14 PM |
|
Ok good , now stop .
Work on Nvidia .
|
|
|
|
Gpumanijak
Newbie
Offline
Activity: 18
Merit: 0
|
|
November 24, 2016, 03:41:29 PM |
|
Ok good , now stop .
Work on Nvidia .
Hahahah, Nvidia will wait Spring 2017. The Way It's Meant to be Played | NVIDIA Cya next year
|
|
|
|
halker2010
Sr. Member
Offline
Activity: 532
Merit: 250
The harder your life is the more meaning it has.
|
|
November 24, 2016, 03:43:55 PM |
|
holy moly r9 380x 130 h/s 7950 175 h/s we need more claymore
Is that all a 380 gives? My 280 non x gives more than that well idk what driver works better for r9 380x it was always 30 percent lower than average in here.
|
|
|
|
Belligerent Fool
Legendary
Offline
Activity: 1218
Merit: 1001
|
|
November 24, 2016, 03:45:58 PM |
|
Once again Claymore you have surpassed yourself and delivered to the community another top of the class miner, I now get 205-210sol/s on each of my R9 280x GPU's on stock everything besides intensity which is set at 2.
2X R9 280x = 415-420sol/s on 15.12 Drivers
|
|
|
|
michaelmms
Newbie
Offline
Activity: 10
Merit: 2
|
|
November 24, 2016, 03:49:37 PM |
|
please release a linux version. you could even take a higer devfee.
optimier is not as good as your miners
|
|
|
|
reb0rn21
Legendary
Offline
Activity: 1898
Merit: 1024
|
|
November 24, 2016, 03:51:54 PM |
|
Ok good , now stop .
Work on Nvidia .
Hahahah, Nvidia will wait Spring 2017. The Way It's Meant to be Played | NVIDIA Cya next year neko ko ce nego balkanska budala
|
|
|
|
Lerrcey
Newbie
Offline
Activity: 53
Merit: 0
|
|
November 24, 2016, 03:55:34 PM |
|
How do you disable read-only mode? I have tried both -mport 3333 and -mport -3333, yet the miner remains read-only
|
|
|
|
Sam123
|
|
November 24, 2016, 03:57:03 PM |
|
Thanks Claymore I have four cards. three card give roughly 160-180. but one card give 45 h/s. All the cards are 480 4gb and 8gb. I swipe the riser but did not help. Any idea Thanks,
|
|
|
|
muchoman
|
|
November 24, 2016, 03:58:40 PM |
|
How do you disable read-only mode? I have tried both -mport 3333 and -mport -3333, yet the miner remains read-only
Change port number. -mport 7777 or whatever you like.
|
|
|
|
Lerrcey
Newbie
Offline
Activity: 53
Merit: 0
|
|
November 24, 2016, 04:01:17 PM |
|
please release a linux version. you could even take a higer devfee.
optimier is not as good as your miners [/quote Thanks Claymore I have four cards. three card give roughly 160-180. but one card give 45 h/s. All the cards are 480 4gb and 8gb. I swipe the raiser but did not help. Any idea Thanks,
I'm having the same issue. I had one card on V7 working at half strength and now V8 has just zeroed it. I tried a different riser, remove OC etc, nothing will budge it.
|
|
|
|
Yaupgitda
|
|
November 24, 2016, 04:05:59 PM |
|
How do you disable read-only mode? I have tried both -mport 3333 and -mport -3333, yet the miner remains read-only
You need to download the latest version.
|
|
|
|
Assaro
Member
Offline
Activity: 114
Merit: 10
|
|
November 24, 2016, 04:10:48 PM |
|
Latest experience update.....:06:19:52:728 1328 ZEC - Total Speed: 459.846 H/s, Total Shares: 4238, Rejected: 6, Time: 01:46 06:19:52:728 1328 ZEC: GPU0 230.285 H/s, GPU1 229.561 H/s, GPU2 0.000 H/s 06:19:53:040 fc ZEC: put share nonce 4c 06:19:53:040 fc ZEC round found 1 shares 06:19:53:055 1328 ZEC: 11/20/16-06:19:53 - SHARE FOUND - (GPU 1) 06:19:53:055 1328 send share: {"id": 4, "method": "mining.submit", "params": ["my adress","3ad6a41e4ee516cccde8","7a323158","4c0000000000000000000000000000000000000000000000000000","fd400500158b61170db4c2 06:19:53:087 1328 got 23 bytes 06:19:53:087 1328 buf: {"id":4,"result":true}
06:19:53:087 1328 parse packet: 22 06:19:53:087 1328 ZEC: Share accepted (32 ms)! 06:19:53:087 1328 new buf size: 0 06:19:53:196 13a0 ZEC: put share nonce 73 06:19:53:196 13a0 ZEC round found 1 shares 06:19:53:211 1328 ZEC: 11/20/16-06:19:53 - SHARE FOUND - (GPU 1) 06:19:53:211 1328 send share: {"id": 4, "method": "mining.submit", "params": ["my adress","3ad6a41e4ee516cccde8","7a323158","730000000000000000000000000000000000000000000000000000","fd400501d55903177193ab 06:19:53:243 1328 got 23 bytes 06:19:53:243 1328 buf: {"id":4,"result":true}
06:19:53:243 1328 parse packet: 22 06:19:53:243 1328 ZEC: Share accepted (32 ms)! 06:19:53:243 1328 new buf size: 0 06:19:53:461 13a0 ZEC: put share nonce d2 06:19:53:461 13a0 ZEC round found 1 shares 06:19:53:477 1328 ZEC: 11/20/16-06:19:53 - SHARE FOUND - (GPU 1) 06:19:53:477 1328 send share: {"id": 4, "method": "mining.submit", "params": ["my adress","3ad6a41e4ee516cccde8","7a323158","d20000000000000000000000000000000000000000000000000000","fd400500aef34ea14f3254 06:19:53:508 1328 got 23 bytes 06:19:53:508 1328 buf: {"id":4,"result":true}
06:19:53:508 1328 parse packet: 22 06:19:53:508 1328 ZEC: Share accepted (31 ms)! 06:19:53:508 1328 new buf size: 0 06:19:56:098 75c ZEC: put share nonce 481 06:19:56:098 75c ZEC round found 1 shares 06:19:56:113 1328 ZEC: 11/20/16-06:19:56 - SHARE FOUND - (GPU 0) 06:19:56:113 1328 send share: {"id": 4, "method": "mining.submit", "params": [quote][quote][quote][/quote][/quote][/quote]["my adress","3ad6a41e4ee516cccde8","7a323158","810400000000000000000000000000000000000000000000000000","fd4005001c8b0d790f8123 06:19:56:144 1328 got 23 bytes 06:19:56:144 1328 buf: {"id":4,"result":true}
06:19:56:144 1328 parse packet: 22 06:19:56:144 1328 ZEC: Share accepted (31 ms)! 06:19:56:144 1328 new buf size: 0 06:19:56:238 10a8 GPU0 t=60C fan=70%, GPU1 t=53C fan=70%, GPU2 t=42C fan=70% 06:19:56:238 10a8 em hbt: 0, fm hbt: 94, 06:19:56:238 10a8 watchdog - thread 0, hb time 16 06:19:56:238 10a8 watchdog - thread 1, hb time 78 06:19:56:238 10a8 watchdog - thread 2, hb time 47 06:19:56:238 10a8 watchdog - thread 3, hb time 109 06:19:56:238 10a8 watchdog - thread 4, hb time 94 06:19:56:238 10a8 watchdog - thread 5, hb time 31 06:19:56:238 10a8 watchdog - thread 6, hb time 63 06:19:56:238 10a8 watchdog - thread 7, hb time 125 06:19:56:238 10a8 watchdog - thread 8, hb time 60607 06:19:56:238 10a8 WATCHDOG: GPU 2 hangs in OpenCL call, exit 06:19:56:238 10a8 watchdog - thread 9, hb time 60638 06:19:56:238 10a8 WATCHDOG: GPU 2 hangs in OpenCL call, exit 06:19:56:238 10a8 watchdog - thread 10, hb time 60700 06:19:56:238 10a8 WATCHDOG: GPU 2 hangs in OpenCL call, exit 06:19:56:238 10a8 watchdog - thread 11, hb time 60669 06:19:56:238 10a8 WATCHDOG: GPU 2 hangs in OpenCL call, exit 06:19:57:268 10a8 Restarting OK, exit..
Im mining with: PC1 ---- mb: MSI Z97 G55 / CPU: i7 4790K / 12GB Kingston hyperX1600 Mhz ram / Win 7 pro 64bit 3x MSI R9 390 gaming 8 GB (no bios modding) each getting 232-236 H/s stable OC Settings with Grimson v16.10.3: GPU clock: +10% = 1144 Mhz Power limit: +10% Memory clock: 1650 Mhz I would like to ask what is my problem. The rig gets restarted in about 12-16 hours. I see that GPU2 is hashing 0 but i use the same settings on another rig with 390s and there is no such a problem. Many thanks for any advice.... this is resolved with setting the virtual memmory to 16gb.... stable on v7 for more than 80 hoursVersion 8 testing i-6 results after 2h: MSI r9 390 stable with 293-298 M/s (abowe settings....) temps: 54°C - 64°C nextPC2 ---- mb: MSI Z97 Gaming 5 / CPU: Intel Pentium G3460 / 8GB Kingston hyperX1600 Mhz ram / Win 7 pro 64bit 3x GIGABYTE R9 390 G1 WINDFORCE 2X Gaming 8GB + saphire triX R9 290 each 390 getting 290-293 H/s and 290 getting 245-247 M/s, stable, no problems temps: on 390: 65°C - 71°C on 290: 64°C - 65°C OC Settings with Grimson v15.12: r9 390: GPU clock: +9% = 1117 Mhz Power limit: +9% Memory clock: 1610 Mhz r9 290: GPU clock: +9% = 1090 Mhz Power limit: +9% Memory clock: 1380 Mhz nextPC3 ---- mb: MSI K9A2 Platinum 790FX / CPU: AMD Phenom 9850 / 4GB DDR2 ram / Win 7 pro 64bit 3x MSI R9 290 gaming 4 GB each getting 240-245 H/s stable, no problems temps: 64°C - 68°C OC Settings with Grimson v15.12: GPU clock: +9% = 1064 Mhz Power limit: +9% Memory clock: 1350 Mhz On all my rigs is the rejection rate of shares between 0,21% - 0,27% Next a nice experience was that i changed on rig PC2 i changed the grimson version from 16.10.3 to the version 15.12 and got a temperature change on my gigabite r9 390 from 69°C - 74°C to 65°C - 71°C! This was already done on v7 and is the same on v8....i hope this helps some1... @CLAYMORE ----Thank you for your great work, hope it will work for you fine as for us!!!! Thank you for sharing your innovations gladly paying the fee
|
|
|
|
Gpumanijak
Newbie
Offline
Activity: 18
Merit: 0
|
|
November 24, 2016, 04:11:33 PM |
|
Ok good , now stop .
Work on Nvidia .
Hahahah, Nvidia will wait Spring 2017. The Way It's Meant to be Played | NVIDIA Cya next year neko ko ce nego balkanska budala Hahhaha brate, pa surova realnost
|
|
|
|
delle54
|
|
November 24, 2016, 04:25:45 PM |
|
How do you disable read-only mode? I have tried both -mport 3333 and -mport -3333, yet the miner remains read-only
You need to download the latest version. You have to download v8 again. There was a bug in -mport which has been fixed.
|
|
|
|
mettalmag
Legendary
Offline
Activity: 1084
Merit: 1003
≡v≡
|
|
November 24, 2016, 04:28:01 PM |
|
startum socket failed ?
|
|
|
|
xeridea
|
|
November 24, 2016, 04:32:23 PM |
|
Thanks Claymore I have four cards. three card give roughly 160-180. but one card give 45 h/s. All the cards are 480 4gb and 8gb. I swipe the riser but did not help. Any idea Thanks,
Get GPU-Z and look at clockspeeds of cards. Sometimes a card won't properly ramp up clocks under load if there are no monitors plugged in. You can also get an HDMI display emulator off Amazon for $15.
|
Profitability over time charts for many GPUs - http://xeridea.us/chartsBTC: bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC: LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth: 0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24
|
|
|
nghiavt
Newbie
Offline
Activity: 6
Merit: 0
|
|
November 24, 2016, 04:37:24 PM |
|
For those, who need comparison data and inerested in Claymore miner progress GPU v8 v7 v6 v5 v4 v3 v2 7870 110 95 65 55 40 35 32 7950 180 155 125 95 70 45 38 7970 200 165 120 95 65 55 48 270x 115 100 67 55 40 35 32 280x 200 165 125 90 65 60 51 285 125 110 85 70 40 36 32 RX 470 4Gb 175 155 145 120 70 60 50 Could you share RX 470 config. Mine just 152 on V8.
|
|
|
|
ghostfaceuk
|
|
November 24, 2016, 04:39:53 PM |
|
Thanks Claymore I have four cards. three card give roughly 160-180. but one card give 45 h/s. All the cards are 480 4gb and 8gb. I swipe the riser but did not help. Any idea Thanks,
Get GPU-Z and look at clockspeeds of cards. Sometimes a card won't properly ramp up clocks under load if there are no monitors plugged in. You can also get an HDMI display emulator off Amazon for $15. I see people recommending the display emulators and was wondering if the end of a cheap hdmi wire would suffice? I can pick one up for £1 and that would give me two ends to effectively plug in.
|
|
|
|
|