IOTUSA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 05:48:55 PM |
|
Bravo Claymore!
v8 now gives me R9 390 = 270 H/s per card!
Updates:
R9 290 = 268 H/s
R9 290x = 278 H/s
RX 480 = 172 H/s
Can you provide some power consumption data for 290/290x/390? Per card or rig.
|
|
|
|
bmtrader
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 05:54:46 PM |
|
someone with electricity info zec/eth?
|
|
|
|
TheChief5055
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:05:20 PM |
|
Bravo Claymore!
v8 now gives me R9 390 = 270 H/s per card!
Updates:
RX 480 = 172 H/s
2*200 H/s from both RX480's (reference and Gigabyte G1). Stock GPU freq/voltage, 2100Mhz / "1750->2000" strap RAM. So far so good.
|
|
|
|
ravikiranb1985
Newbie
Offline
Activity: 9
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:07:37 PM |
|
Hello Claymore
Please improve support to 16.x amd cards Thank you in advance
thank you regards
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:08:37 PM |
|
Bravo Claymore!
v8 now gives me R9 390 = 270 H/s per card!
Updates:
R9 290 = 268 H/s
R9 290x = 278 H/s
RX 480 = 172 H/s
R9 Nano = 278 H/s
R7 370 = 110 H/s
Can you provide some power consumption data for 290/290x/390? Per card or rig. the rigs are offsite - will post when I access them tomorrow morning. I updated remotely all the rigs that are with 1600w PSUs = 7x 370s, 5 x 390s, 6 x Nanos, and 6 x 480s. With CDM v7.4, these rigs are mining ETH full speed, ethi 16 and nearly 80-85% of PSU. But with CZM v7, these rigs are well under 65-70% of PSU. Hope the CZM v8 doesnt reach CDM power draw because CZM runs with less heat and significantly lower power - and all these good points will be neutralised when CZM v8 equals CDM v7.4 powerdraw.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
Walrusbonzo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:09:06 PM |
|
Pulling 1560w to get just over 1800 sol/s on my 290x rig ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
|
Walrusbonzo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:10:25 PM |
|
Hello Claymore
Please improve support to 16.x amd cards Thank you in advance
thank you regards
In what way? i'm using 16.11.x across all my RX480 and 290x and Claymore miner works great.
|
|
|
|
rpg
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:13:18 PM |
|
Fyi xfx 480 8gig for $184 at Newegg when paid with amex
|
|
|
|
_javi_
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:15:39 PM |
|
i just burned a small psu in a rig with 8.0 which was fine with 7.0 (i knew it was at the brink of its capabilities). No regrets.. it was an old one.
but beware: Definatly usage power increase in this version.
|
|
|
|
sorry2xs
Legendary
Offline
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:17:21 PM |
|
Bravo Claymore!
v8 now gives me R9 390 = 270 H/s per card!
Updates:
R9 290 = 268 H/s
R9 290x = 278 H/s
RX 480 = 172 H/s
R9 Nano = 278 H/s
R7 370 = 110 H/s
Can you provide some power consumption data for 290/290x/390? Per card or rig. the rigs are offsite - will post when I access them tomorrow morning. I updated remotely all the rigs that are with 1600w PSUs = 7x 370s, 5 x 390s, 6 x Nanos, and 6 x 480s. With CDM v7.4, these rigs are mining ETH full speed, ethi 16 and nearly 80-85% of PSU. But with CZM v7, these rigs are well under 65-70% of PSU. Hope the CZM v8 doesnt reach CDM power draw because CZM runs with less heat and significantly lower power - and all these good points will be neutralised when CZM v8 equals CDM v7.4 powerdraw. 5x 390,5x480,2x7950s 3 psus total watts 3300 all on a single 240 volts ac circuit 12.5 amps= 3000 watts total hashrate 2.8 Kh/s ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
Please tip the Node 1MPWKB23NsZsXHANnFwVAWT86mL24fqAjF; KO4UX THAT NO GOOD DO GOODER BAT!!!
|
|
|
Hotmetal
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:19:52 PM |
|
Have to love v8: (6 x RX480s) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FWYBtl8V.jpg&t=665&c=WUnvd0RkBcaXCA) where did you get this grafic? I built an API layer that allows me to switch between whatever (gpu) coin is (currently) the most profitable automatically. The graphing is just a "nice to look at". I wouldn't mind people using it but I suspect it will land up being DDOS'd rather quickly.
|
|
|
|
Havane
Jr. Member
Offline
Activity: 76
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:20:08 PM |
|
Sometimes after few hours or days, with Claymore V7 or V8, One fan of my 6 RX 480 RIG, goes up to 95%, instead of 60%. A reboot solve the problem. Do you know why ?
|
|
|
|
batko
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:24:16 PM |
|
Sometimes after few hours or days, with Claymore V7 or V8, One fan of my 6 RX 480 RIG, goes up to 95%, instead of 60%. A reboot solve the problem. Do you know why ?
same problem, i have 2 Rigs 5x480 Nitro, and 4x480 Nitro sometimes fan up to 100%, reboot solve problem.
|
Donation: ETH: 0x0c8ce94dd3d1bfd09c0f887559c61d1b551e4b4d
|
|
|
Heatspeed
Newbie
Offline
Activity: 26
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:25:20 PM |
|
Each rx 480 nitro gets about 195 H/S
~ 1.2 H/s/Watt
Execpt GPU 0 is always a bit higher like +5% than the other GPUs
Anybody know why?
Maybe because the monitor is plugged in there?
|
|
|
|
vi1son
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:26:40 PM |
|
Wow! My old 7850 gives 91H/s now/. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif)
|
|
|
|
HardwarePal
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:28:50 PM |
|
Sometimes after few hours or days, with Claymore V7 or V8, One fan of my 6 RX 480 RIG, goes up to 95%, instead of 60%. A reboot solve the problem. Do you know why ?
same problem, i have 2 Rigs 5x480 Nitro, and 4x480 Nitro sometimes fan up to 100%, reboot solve problem. 99% a riser problem
|
|
|
|
Eisenkopf89
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:33:26 PM |
|
My Fury X have about 310H/s 😁
|
|
|
|
_javi_
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:38:34 PM |
|
Do you realize that we are all rising the hashrate, rising the diff, and then earning the same as before??
|
|
|
|
auctioneeeeer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:39:50 PM |
|
Do you realize that we are all rising the hashrate, rising the diff, and then earning the same as before??
It's been said many times before, but we're also drowning out the CPUs aka botnets by making GPUs more faster.
|
|
|
|
Heatspeed
Newbie
Offline
Activity: 26
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2016, 06:40:51 PM |
|
Do you realize that we are all rising the hashrate, rising the diff, and then earning the same as before??
Exept linux unsers ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
|
|