Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[halker2010]

holy moly r9 380x 130 h/s
7950 175 h/s we need more claymore

[ghostfaceuk]

holy moly r9 380x 130 h/s
7950 175 h/s we need more claymore

Is that all a 380 gives?

My 280 non x gives more than that

[Marginmasters]

 
He destroyed my computer, burned BIOS  ??    http://pixs.ru/showimage/2016112322_3532409_24165230.jpg

[draxy]

6 x rx 480 8gb - 1200 h/s - wall power 910w - gpu clock 1300, mem clock 2150, no undervolt, bios from eth v4

[toptek]

holy moly r9 380x 130 h/s
7950 175 h/s we need more claymore

Is that all a 380 gives?

My 280 non x gives more than that

My non X does to , he must be doing some thing wrong.

[Jjohnwick]

 Rx 480 sapphire nitro+ 8gb 220 Sol. This is great job claymore. Thank u!
 https://postimg.org/image/405regg13/

[viktorheli]

First question - what PSU do You use? Can You change PSU for testing? I dont have much rigs - around 25 - and I have seen that most problems start with bad or noname PSUs.. Now I am using just Corsair, Seasonic, Antec or bequiet! PSUs. And problems went away.. Other hardware is standard ( BTC Pro mobos, G1840 processor, 8GB ram, corsair SSD ).

Hi. I'm use brand new AeroCool Higs 850. Yes, I changed to another PSU. But this does not solve the problem.

Now tried the V8. Claymore great work! Thanks.

For the same hashrate for all GPU. I needed to restart miner 6 times! Six times!

ZEC: 11/24/16-21:41:28 - New job from eu1-zcash.flypool.org:3333
ZEC - Total Speed: 585.107 H/s, Total Shares: 487, Rejected: 1, Time: 00:15
ZEC: GPU0 197.356 H/s, GPU1 192.574 H/s, GPU2 195.177 H/s
DevFee: ZEC: 11/24/16-21:41:28 - New job from eu1-zcash.flypool.org:3333
DevFee: ZEC: 11/24/16-21:41:29 - SHARE FOUND - (GPU 1)

[fr4nkthetank]

First question - what PSU do You use? Can You change PSU for testing? I dont have much rigs - around 25 - and I have seen that most problems start with bad or noname PSUs.. Now I am using just Corsair, Seasonic, Antec or bequiet! PSUs. And problems went away.. Other hardware is standard ( BTC Pro mobos, G1840 processor, 8GB ram, corsair SSD ).

Hi. I'm use brand new AeroCool Higs 850. Yes, I changed to another PSU. But this does not solve the problem.

Now tried the V8. Claymore great work! Thanks.

For the same hashrate for all GPU. I needed to restart miner 6 times! Six times!

ZEC: 11/24/16-21:41:28 - New job from eu1-zcash.flypool.org:3333
ZEC - Total Speed: 585.107 H/s, Total Shares: 487, Rejected: 1, Time: 00:15
ZEC: GPU0 197.356 H/s, GPU1 192.574 H/s, GPU2 195.177 H/s
DevFee: ZEC: 11/24/16-21:41:28 - New job from eu1-zcash.flypool.org:3333
DevFee: ZEC: 11/24/16-21:41:29 - SHARE FOUND - (GPU 1)

"I dont have much rigs - around 25"

LOL

[Flarus]

Claymore thx bro ... nice work!!!
280 - 191 h/s
280x - 205 h/s
290 - 250h/s
290x - 265h/s
This GREATE!!!

[toptek]

The improvements OF CM 8 were indeed to older cards which still makes me wonder how much more they can push 460, 470 and 480 and the yet to come 490 .




my three 470 and one 480 didn't go up much the impressive increases was the older cards

2 R7 370 and one R9280 non X version . all most makes me want to buy some older cards .

I'm doing 1.13 KH or a little less was doing with my Set up, 936 H at best with last CM version .


ZEC coins are going back up and it's just starting.

[needhelp2]

GPU #0: Pitcairn, 3072 MB available, 16 compute units
GPU #1: Tonga, 4096 MB available, 32 compute units
GPU #2: Hawaii, 8192 MB available, 44 compute units
GPU #3: Tonga, 4096 MB available, 28 compute units
GPU #4: Tahiti, 3072 MB available, 32 compute units
ZEC - Total Speed: 836.620 H/s, Total Shares: 59, Rejected: 0, Time: 00:01
ZEC: GPU0 104.585 H/s, GPU1 133.607 H/s, GPU2 290.131 H/s, GPU3 132.362 H/s, GPU4 175.936 H/s
Pool switches: ZEC - 0
Current ZEC pool share target: 0x00418937 (diff: 1000H)
GPU0 t=74C fan=60%, GPU1 t=75C fan=56%, GPU2 t=59C fan=35%, GPU3 t=55C fan=47%, GPU4 t=61C fan=52%


Thank You, Mr Claymore

[m00nspeell]

Rx 480 sapphire nitro+ 8gb 220 Sol. This is great job claymore. Thank u!
 https://postimg.org/image/405regg13/

What settings and bios do you use?

[forzendiablo]

this miner rocks... over 200 sols on stock 280x

[Jjohnwick]

Rx 480 sapphire nitro+ 8gb 220 Sol. This is great job claymore. Thank u!
 https://postimg.org/image/405regg13/

What settings and bios do you use?

 gpu 1430mhz  memory clock 2100mhz vbios and  use -i 6

[dlx]

http://www.tomshardware.co.uk/forum/id-2547993/psu-tier-list.html

https://linustechtips.com/main/topic/631048-psu-tier-list-updated/

For mining,  select PSU from tier 1 or tier 2,  and only tier 1 if you use > 85% of rated power.

[Lerrcey]

Getting 860 H/s overall 4 x RX480 8GB Sapphire Nitro+ Core GPU 1400MHz Memory 2100, getting roughly 215 H/s per card, Thanks Claymore

What power settings and how much power draw?


I'm getting 190-200 h/s per card at about 90W per card using only 1250 CC. Same GPU's

[Destined]

Finally after some tinkering now v8 on 7970 is giving 170h/s.

[Lerrcey]

In version 7 I was having an issue with one card only working at half strength (vs 17 identical cards)

Now in version 8; that card is completely zero'd and crashing the machine if left in the config.
The card works fine, and at full strength, when using any other Claymore miner, just this ZCash one that it doesn't like.

Anyone got any suggestions?

[ghostfaceuk]

In version 7 I was having an issue with one card only working at half strength (vs 17 identical cards)

Now in version 8; that card is completely zero'd and crashing the machine if left in the config.
The card works fine, and at full strength, when using any other Claymore miner, just this ZCash one that it doesn't like.

Anyone got any suggestions?

try running a instance of the miner just for it.  if this works run another instance (so two zecminer running at the same time) for the rest of the cards and see what happens then.

[orbico]

390 8gb xfx  @ 275-280 each
480 4gb xfx @ 185-190 each
Awsome work Claymore, Thanks !