yoyo1
Newbie
Offline
Activity: 47
Merit: 0
|
|
July 12, 2017, 10:09:46 AM |
|
cool miner, waiting for linux version.
i DEMAND linux version +1 and now with crowd - linux linux linux !!! it's ridiculous how things changed over last years, once free open source miners now replaced with closed, fee based miners released for windows and on top of it now we should beg for linux releases. sad... I'm with you here. Crowd spoils everything
|
|
|
|
cTnko
Member
Offline
Activity: 85
Merit: 10
|
|
July 12, 2017, 10:16:40 AM |
|
What is it? You are using 2 workers for a single card for daggerhashimoto (the recommended amount is 1). Remove the extra worker and everything should be fine.
|
|
|
|
Redmonk
Newbie
Offline
Activity: 12
Merit: 0
|
|
July 12, 2017, 11:11:46 AM |
|
You are using 2 workers for a single card for daggerhashimoto (the recommended amount is 1). Remove the extra worker and everything should be fine. Thanks for your reply. And how do I remove an extra worker?
|
|
|
|
cTnko
Member
Offline
Activity: 85
Merit: 10
|
|
July 12, 2017, 11:16:04 AM |
|
What is it? You are using 2 workers for a single card for daggerhashimoto (the recommended amount is 1). Remove the extra worker and everything should be fine. Thanks for your reply. And how do I remove an extra worker? You go to the command_file.json (it might be named a bit differently, its the file you set your pool/address in) and look for a section looking like this {"time":3,"commands":[ {"id":1,"method":"worker.add","params":["0","0"]}, {"id":1,"method":"worker.add","params":["0","0"]} ]},
and you change it to this {"time":3,"commands":[ {"id":1,"method":"worker.add","params":["0","0"]} ]},
|
|
|
|
dvijaydev46
Newbie
Offline
Activity: 56
Merit: 0
|
|
July 12, 2017, 11:51:55 AM |
|
Can I mine any ehtash coin other than ETH and coin ETC?
|
|
|
|
Redmonk
Newbie
Offline
Activity: 12
Merit: 0
|
|
July 12, 2017, 12:53:13 PM |
|
You are using 2 workers for a single card for daggerhashimoto (the recommended amount is 1). Remove the extra worker and everything should be fine. Thanks for your reply. And how do I remove an extra worker? You go to the command_file.json (it might be named a bit differently, its the file you set your pool/address in) and look for a section looking like this {"time":3,"commands":[ {"id":1,"method":"worker.add","params":["0","0"]}, {"id":1,"method":"worker.add","params":["0","0"]} ]},
and you change it to this {"time":3,"commands":[ {"id":1,"method":"worker.add","params":["0","0"]} ]},
Many thanks, helped!
|
|
|
|
wallstreetwoods
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 12, 2017, 02:23:30 PM |
|
Hi, I'm trying to run Excavator on one RX470, and keep getting the following error message, any thoughts?
[[2017-07-09 14:32:34.574823] [thread=0x00002bb0] [error]]
Assertion failed: ReadPCI(topology.pcie.bus, 0, 0, 0x24, sizeof(config_registers_addr), &config_registers_addr) in openclhelp.cpp(283).
This is a compatibility issue with excavator. Which operating system are you using? I've now tried on W7 and W8, same issue. Anything else you think I could try?
|
|
|
|
Kompik
|
|
July 12, 2017, 06:07:13 PM |
|
hi, for first awesome project, but I have small problem I got stable 140 Mh/s with ethereum but with zec I have only 1500 h/s any idea why ? I have 6x 1060
Hi, are you using 2 workers per card (you have 6 cards, so 12 workers total), also did you overclock the core ? hi, yes I have two workes and overcloked mem, but still I got the same speed, while overclocking did gave me a burst on eth it did not on equihash Memory overclocking doesn't really do much for equihash, its the core speed that matters the most. This might be a far fetched idea, but have you checked your P-State ? (you can do that with nvidia inspector). What is the hashrate you expected from the cards that you have? Friend of mine is running an overclocked 1060 with 100W tdp limit, it hashes around 270 h/s for him. Memory overclocking does quite a lot for equihash, just use GPU-Z and see that it uses memory. Also 1060(samsung) can do 320 sols on EWBF.
|
Bitrated user: Kompik.
|
|
|
Romeo26222
Newbie
Offline
Activity: 16
Merit: 0
|
|
July 13, 2017, 12:22:08 PM |
|
hi, for first awesome project, but I have small problem I got stable 140 Mh/s with ethereum but with zec I have only 1500 h/s any idea why ? I have 6x 1060
Hi, are you using 2 workers per card (you have 6 cards, so 12 workers total), also did you overclock the core ? hi, yes I have two workes and overcloked mem, but still I got the same speed, while overclocking did gave me a burst on eth it did not on equihash Memory overclocking doesn't really do much for equihash, its the core speed that matters the most. This might be a far fetched idea, but have you checked your P-State ? (you can do that with nvidia inspector). What is the hashrate you expected from the cards that you have? Friend of mine is running an overclocked 1060 with 100W tdp limit, it hashes around 270 h/s for him. Memory overclocking does quite a lot for equihash, just use GPU-Z and see that it uses memory. Also 1060(samsung) can do 320 sols on EWBF. I used to use EWBF miner and got 320 SOL on each of my 1060 instead of getting 285 SOL using excavator, but I had a massive issues in stability in it and it crashes frequently even in stock settings, so I switched to excavator, low SOLs but running stable now for more than three days which has never happened with EWBF..
|
|
|
|
thhjs
Newbie
Offline
Activity: 39
Merit: 0
|
|
July 13, 2017, 01:20:26 PM |
|
Are you using overclock on the memory?
|
|
|
|
abudfv2008
|
|
July 13, 2017, 03:36:37 PM |
|
I used to use EWBF miner and got 320 SOL on each of my 1060 instead of getting 285 SOL using excavator, but I had a massive issues in stability in it and it crashes frequently even in stock settings, so I switched to excavator, low SOLs but running stable now for more than three days which has never happened with EWBF..
As far as EWBF restart is almost instant (no DAG generation). Then it is no problem just to kill process once in every XX minute. 330-340Sols instead of 290 is 10-15% extra.
|
|
|
|
cryptouse
Newbie
Offline
Activity: 39
Merit: 0
|
|
July 13, 2017, 07:13:18 PM |
|
Are you using overclock on the memory?
yes, I do. core 100 and memory 800 power limit 70, but I have MCU load at 60% dunno if should be 100%
|
|
|
|
thhjs
Newbie
Offline
Activity: 39
Merit: 0
|
|
July 14, 2017, 05:36:19 AM |
|
Are you using overclock on the memory?
yes, I do. core 100 and memory 800 power limit 70, but I have MCU load at 60% dunno if should be 100% What brand and type of GPU are you using. I'm using a EVGA 1070 SC. But with 600 mhz plus on the memory I got artifacts. It has Micron chips on it.
|
|
|
|
MarcusDe
|
|
July 14, 2017, 09:20:40 AM |
|
Are you using overclock on the memory?
yes, I do. core 100 and memory 800 power limit 70, but I have MCU load at 60% dunno if should be 100% What brand and type of GPU are you using. I'm using a EVGA 1070 SC. But with 600 mhz plus on the memory I got artifacts. It has Micron chips on it. My 1060 cards with Samsung memory work flawless with +850 memory, and those without not more than +600 stable.
|
|
|
|
thhjs
Newbie
Offline
Activity: 39
Merit: 0
|
|
July 14, 2017, 09:23:00 AM |
|
Are you using overclock on the memory?
yes, I do. core 100 and memory 800 power limit 70, but I have MCU load at 60% dunno if should be 100% What brand and type of GPU are you using. I'm using a EVGA 1070 SC. But with 600 mhz plus on the memory I got artifacts. It has Micron chips on it. My 1060 cards with Samsung memory work flawless with +850 memory, and those without not more than +600 stable. I will try it with 550 Mhz. Thanks.
|
|
|
|
DragonSlayer
|
|
July 16, 2017, 04:17:29 PM |
|
Wondering, does excavator work on other pools or is it locked to nicehash? With profits dropping, I am thinking about mining coins that I want to hold for a while.
|
|
|
|
cTnko
Member
Offline
Activity: 85
Merit: 10
|
|
July 16, 2017, 06:14:30 PM |
|
Wondering, does excavator work on other pools or is it locked to nicehash? With profits dropping, I am thinking about mining coins that I want to hold for a while.
daggerhashimoto is only supported on nicehash and suprnova, other algorithms should work fine on any other pool
|
|
|
|
baten
Newbie
Offline
Activity: 38
Merit: 0
|
|
July 19, 2017, 07:41:31 AM |
|
is there a way to restart Excavator every 6 hours?
|
|
|
|
thhjs
Newbie
Offline
Activity: 39
Merit: 0
|
|
July 19, 2017, 09:04:06 AM |
|
Via scheduled tasks maybe.
|
|
|
|
xmanzero
Newbie
Offline
Activity: 38
Merit: 0
|
|
July 19, 2017, 10:11:44 AM |
|
Hello, my friend said with me that: nicehash don't receive hashrate from Iberlink X11 10800Mhs, it 's right?
|
|
|
|
|