AMD Rebrand - RX570 / RX580 - Official Thread

[kirilvvbg]

Hello All.
I was able to get 6 x RX-500 series running on windows 10 x64. After two days the stupidest thing I tried worked  .
1. use DDU to clean the PC from any previous drivers.
2. Disable 4G decoding so you can log into windows (only  for Z170,H170, etc.)
3. Extract older driver for RX 400 series in Drive C: (I use 16.9.2 )
4. Extract driver for RX 500 series in Drive C: (I use 17.4.3)
5. Copy and replace all content from "C:\AMD\Non-WHQL-Win10-64Bit-Radeon-Software-Crimson-16.9.2-Sep21\Packages\Drivers\Display\WT6A_INF\B307117"  to "C:\AMD\WHQL-Win7-64Bit-Radeon-Software-Crimson-ReLive-17.4.3-Apr17\Packages\Drivers\Display\W76A_INF\B313057" (Basically you copy the old driver over the new)
6. Install the VGA cards manually from Device manager in Windows pointing path to the new driver 17.4.3 in this case.
7. Reboot and enable 4G Decoding in Bios
8. Enjoy if it works for you.

You can try with different driver versions if they work for you. I`m happy whit the 16.9.2 for the moment but any driver that works whit 6 and more RX 400 series GPUs should work  .

I know  that this solution sound stupid but it`s tested on 8 different rigs whit Asus Prime Z270-P and H270 Motherboards and works like a charm.
I`m pretty sure only handful of files need to be replaced but I don have the time to test more elegant solution.

Sorry for my English and grammar.

Anybody tried this on windows 8.1 x64?
I do the same replacement of driver files, but there is no compatible model for RX570...

[1715123580]

1715123580

[1715123580]

1715123580

[Apneal]

The card model is the most popular card on this board.

Is that the Sapphire Radeon RX570 Nitro+ 4GB? Memory from Hynix or Elpida?

Can you upload that bios somewhere I will try to use it for gigabyte cards.

Micron

screenshot

Sorry I was looking at PBE (forgot it lists 2), it's Hynix

[Flickspeed]

The card model is the most popular card on this board.

Is that the Sapphire Radeon RX570 Nitro+ 4GB? Memory from Hynix or Elpida?

Can you upload that bios somewhere I will try to use it for gigabyte cards.

Micron

screenshot

Sorry I was looking at PBE (forgot it lists 2), it's Hynix

Bios?

[GPUM1ner]

Are you guys actually installing through the AMD installer?

I tried manually adding them in Device Manager, but it wouldn't find them. I installed the AMD drivers (Video+Audio) and it recognizes 6 but it crashes after bootup.

16.9.2 -> 17.4.3

[PetrMiner]

Hello,

i have 6 GPU mining rig with RX580 8Gb XFX Black Edition. All works fine. Thanks for info how to make it work with new drivers.

I have problem with BIOS modd . Straps are not recognized by Polaris Bios Editor. Anyone have this problem?

I know there was problem with Hynix memory but this type have Samsung.

Anybody could share bios modd for this card or help me?

[PetrMiner]

Are you guys actually installing through the AMD installer?

I tried manually adding them in Device Manager, but it wouldn't find them. I installed the AMD drivers (Video+Audio) and it recognizes 6 but it crashes after bootup.

16.9.2 -> 17.4.3

what type of motherboard do you have? For me trought amd installer it doesnt work. You probably make some mistake in copying files. Probably you copied inf files in

C:\AMD\WHQL-Win7-64Bit-Radeon-Software-Crimson-ReLive-17.4.3-Apr17\Packages\Drivers\Display\W76A_INF\
 by 16.9.2

but you only need to replace content of C:\AMD\WHQL-Win7-64Bit-Radeon-Software-Crimson-ReLive-17.4.3-Apr17\Packages\Drivers\Display\W76A_INF\B313057

by

C:\AMD\Non-WHQL-Win10-64Bit-Radeon-Software-Crimson-16.9.2-Sep21\Packages\Drivers\Display\WT6A_INF\B307117

or

You did not select manually inf file from device manager.  Not working only point to folder for me.

[tgejesse]

Anyone got a good bios for Sapphire RX 570 4GB Nitro+?

Would realy appreciate it 

This. This so much. I've never overclocked before / edited bios and I'm afraid if I do it myself, I will brick it

[Flickspeed]

Ok now I know why my elpida mods didn't work and that's because the elpida/hynix IDs keep changing in different card models. sometimes elpida can be at 1 and sometimes elpida can be at 2. So turns out I never even edited the card properly

[justchil]

You are lucky i cant make the memory work above 1910 MHz

I bought 4 more.  1950,2000,2100,2100,2100 on 1500 straps.

[dragonmike]

Just about to pull the trigger on the components for two 7-GPU (Sapphire RX 570 Nitro+ 8GB) mining rigs. Wish me luck.

[quick1unc]

Hi all,

New to the forum and new to crypto mining but I decided to jump right. Looking for a little advice. I know you guys need info to work off of so i'll post what I bought and what i'm doing and looking to do.

I have x6 Sapphire Nitro+ rx580 8gb
MSI z170a gaming pro carbon

I'm building a customer frame so while i'm working on that, i hooked up the motherboard, 550w psu which will ultimately go along with a 1200w server psu and a single 580 to get things loaded and started.
I loaded driver 17.3.4

The first issue i'm having is that the whole system is just randomly shutting down. I originally tried to make some minor changes in Polaris bios editor and copied the 1750 straps into the 2000 straps.
This first card that I'm 'trying with has hynix memory. Does anyone have any advice to setting up a hynix 580 for best hashrates/power usage?

As far as the power shutdowns, i'm not sure whats causing that. I don't have any overclocking and this base setup shouldn't be too much for the 550w psu, so i'm thinking maybe a hardware issue? once I get that sorted out, I will go through each card one by one and set them up for the rig before trying all 6. I know there have been some updates on getting 580's to run with 6 cards, is the go to solution still to copy the older driver folder into the new one?

Any advice you guys can give would be greatly appreciated.

[adly3000]

Hi all,

New to the forum and new to crypto mining but I decided to jump right. Looking for a little advice. I know you guys need info to work off of so i'll post what I bought and what i'm doing and looking to do.

I have x6 Sapphire Nitro+ rx580 8gb
MSI z170a gaming pro carbon

I'm building a customer frame so while i'm working on that, i hooked up the motherboard, 550w psu which will ultimately go along with a 1200w server psu and a single 580 to get things loaded and started.
I loaded driver 17.3.4

The first issue i'm having is that the whole system is just randomly shutting down. I originally tried to make some minor changes in Polaris bios editor and copied the 1750 straps into the 2000 straps.
This first card that I'm 'trying with has hynix memory. Does anyone have any advice to setting up a hynix 580 for best hashrates/power usage?

As far as the power shutdowns, i'm not sure whats causing that. I don't have any overclocking and this base setup shouldn't be too much for the 550w psu, so i'm thinking maybe a hardware issue? once I get that sorted out, I will go through each card one by one and set them up for the rig before trying all 6. I know there have been some updates on getting 580's to run with 6 cards, is the go to solution still to copy the older driver folder into the new one?

Any advice you guys can give would be greatly appreciated.

Shut down means over power. I think your main power supply shuts down due to over power consumption.

[Marvell1]

so i grabbed a few MSI 570s 4GB and two XFX 580 8GB to play with and the cards are nice , 570s do 28-29.5 mhs at 2100 mem
the 580 does around the same

problem is even with afterburner lowering wattage by 100mv they still are stuck at around 1000mv , higer for the 580

the 580 consumes close to 200 watt at the wall, the 570s 120 ish , compared to 100watt from my 470s and 120 watt from my 480s.

Anyone know a version of  Wattmon the free tool that recognises 570s and 580s so we can get even lower offsets ?

[Marvell1]

so i grabbed a few MSI 570s 4GB and two XFX 580 8GB to play with and the cards are nice , 570s do 28-29.5 mhs at 2100 mem
the 580 does around the same

problem is even with afterburner lowering wattage by 100mv they still are stuck at around 1000mv , higer for the 580

the 580 consumes close to 200 watt at the wall, the 570s 120 ish , compared to 100watt from my 470s and 120 watt from my 480s.

Anyone know a version of  Wattmon the free tool that recognises 570s and 580s so we can get even lower offsets ?

It's not WattMon, it's the controller on the cards. XFX has NCP81022 - if they are the same as their non-ref 470s and 480s - so use MSI Afterburner.

yeah but AB only lets you undervolt by -100, these cards have a crazy high default voltage, they probbaly need to be brought down to -150

[WhyMe]

Just flash them with a lower voltage !

[quick1unc]

I don't see how. I only have the 1 card, 1 ssd and nothing else plugged into the mobo with thre 550w psu.

quote author=adly3000 link=topic=1874892.msg18900816#msg18900816 date=1494099179]

Hi all,

New to the forum and new to crypto mining but I decided to jump right. Looking for a little advice. I know you guys need info to work off of so i'll post what I bought and what i'm doing and looking to do.

I have x6 Sapphire Nitro+ rx580 8gb
MSI z170a gaming pro carbon

I'm building a customer frame so while i'm working on that, i hooked up the motherboard, 550w psu which will ultimately go along with a 1200w server psu and a single 580 to get things loaded and started.
I loaded driver 17.3.4

The first issue i'm having is that the whole system is just randomly shutting down. I originally tried to make some minor changes in Polaris bios editor and copied the 1750 straps into the 2000 straps.
This first card that I'm 'trying with has hynix memory. Does anyone have any advice to setting up a hynix 580 for best hashrates/power usage?

As far as the power shutdowns, i'm not sure whats causing that. I don't have any overclocking and this base setup shouldn't be too much for the 550w psu, so i'm thinking maybe a hardware issue? once I get that sorted out, I will go through each card one by one and set them up for the rig before trying all 6. I know there have been some updates on getting 580's to run with 6 cards, is the go to solution still to copy the older driver folder into the new one?

Any advice you guys can give would be greatly appreciated.

Shut down means over power. I think your main power supply shuts down due to over power consumption.
[/quote]

[quick1unc]

I ordered another psu to try until my server psu's come in and I can try both. I can't try the mobo without the 580 since it has no built in graphics, but at idle I would imagine the power draw with only 1 card installed would be a couple hundred watts at most.

[Chuck_Norris]

Need a little help. And in return a little info

1. I did get 6 rx570 nitro+ 4gb to work at the same time. Following that guys driver fix was super easy
2. Strapping them was weird because after the straps no hash increase until you oc memory. Got them to 28mh easy.
3. After strapping them it wont show video until it's all the way into the os. Also had to disable fast boot in power options in windows. Otherwise i would have to unplug the hdmi cable and plug it back in just for video to show. Weird stuff.

Here is my problem. 1450 watts at the wall.

Since i can't fully install the 500 series driver.  I can't install wattman or whatever comes with the driver so msi afterburner can change the voltages.  So i can get all 6 cards to work. No problem. But i can't change voltages at all. How can i get afterburner to control voltages.

My only thought on this would be to install like 2 cards with the 500 series driver.  ddu all drivers. and do driver fix. And point windows at the fixed driver folder again?? I dont know. i have no other way to control voltages with 6  500 series cards. I have a 4 card msi rx580 rig which i can change voltages on bc it's only 4 cards and i don't have to do the driver fix.

How is anybody changing volts on 6 gpu 500 series rigs.

2 results.
rx570 nitro+ 4gb 27-29mh  1250 core and 2000 memory. 1500 strap hynix memory  6 gpu @ 1450 watts
rx580 msi gaming x  solid 29. Up to 31mh.   2150mem, 1150 core, 1750 strap.  -100mv 830watts at the wall on a i7 even 4 gpu total

i have put 100 cards online in the past 60 days. Im at a loss on these 500 series cards. Please help. Ohh and everything i do is dual mine eth+dcr

[Jamievs]

Need a little help. And in return a little info

1. I did get 6 rx570 nitro+ 4gb to work at the same time. Following that guys driver fix was super easy
2. Strapping them was weird because after the straps no hash increase until you oc memory. Got them to 28mh easy.
3. After strapping them it wont show video until it's all the way into the os. Also had to disable fast boot in power options in windows. Otherwise i would have to unplug the hdmi cable and plug it back in just for video to show. Weird stuff.

Here is my problem. 1450 watts at the wall.

Since i can't fully install the 500 series driver.  I can't install wattman or whatever comes with the driver so msi afterburner can change the voltages.  So i can get all 6 cards to work. No problem. But i can't change voltages at all. How can i get afterburner to control voltages.

My only thought on this would be to install like 2 cards with the 500 series driver.  ddu all drivers. and do driver fix. And point windows at the fixed driver folder again?? I dont know. i have no other way to control voltages with 6  500 series cards. I have a 4 card msi rx580 rig which i can change voltages on bc it's only 4 cards and i don't have to do the driver fix.

How is anybody changing volts on 6 gpu 500 series rigs.

2 results.
rx570 nitro+ 4gb 27-29mh  1250 core and 2000 memory. 1500 strap hynix memory  6 gpu @ 1450 watts
rx580 msi gaming x  solid 29. Up to 31mh.   2150mem, 1150 core, 1750 strap.  -100mv 830watts at the wall on a i7 even 4 gpu total

i have put 100 cards online in the past 60 days. Im at a loss on these 500 series cards. Please help. Ohh and everything i do is dual mine eth+dcr

You can use the claymore commands to lower power usage.. See cvddc and mvddc commands. So far I cant get my 6x 580 rig not below 1250 watt without making it unstable though 

[Chuck_Norris]

MY GUY! Halarious!! Right before you said that. I figured that out for myself!!! For the longest time i never knew why i could never use those commands. TRIED SOO HARD! Finally realise it was wattman or the full driver blocking me the entire time. I'm betting i can do that on my rx470 builds too. DDU them. Don't install driver. Just point it at the driver folder instead so it doesn't install wattman or whatever. So that way i can use claymore commands instead. I'm managing over 100 cards. Less software. Less settings. All under one bat is best..

Here's my very last problem. And very weird issue. Whatever i set clocks with. msi or claymore commands. If i reboot my machine. It loads whatever clocks were last set. Msi doesn't boot with windows. and i remove the clocks from claymore. Something is remembering the clocks. But what? Thanks for your help! Because if i didn't figure it out. You were right anyways! Just got the 6gpu's down to 1000 watts! at the wall! 1300 evga gold. Can't verify if it's stable yet tho. As i just figured these issues out.