smaxz
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 430
Merit: 253
VeganAcademy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 18, 2017, 05:32:21 PM Last edit: June 19, 2017, 03:08:51 AM by smaxz |
|
The backplate on GB is different it just hold also on 3 internal screws from which 2 can be only accessed if I remove whole cooling which dont want to go out because of probably heat paste sticking like hell. So - any other ideas? I cannot access that BIOS chip. Also anybody with Aorus XTR 8GB original bios? Pls ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) yeah often a thermal adhesive is used or thermal tape that must be gently pried off of chips to remove them. why are you trying to access the bios chip anyways, you do realize "flashing the bios" has nothing to do with shining bright light to an exposed semiconductor right?
|
- NGdTwHRSdnThdi1drQuHGT3khAHRtZ1HMq -
|
|
|
batman3
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 18, 2017, 07:24:43 PM Last edit: June 18, 2017, 08:11:30 PM by batman3 |
|
Hi, I how one rig with 6 gpu Asus rog strix rx-570, motherboard asus h270-plus, 4GB ram,.... And I how big big problems, canot make this work...every 20min restart...speed is 26MHs I try driver 17.5.1, also try this http://1stminingrig.com/run-6-rx-570-rx-580-gpus-windows-10 now msiAfterburner brok for 5min.... Is this card shit or motherboard or what?
|
|
|
|
|
cuteboy111
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 18, 2017, 10:14:43 PM |
|
Hi, I how one rig with 6 gpu Asus rog strix rx-570, motherboard asus h270-plus, 4GB ram,.... And I how big big problems, canot make this work...every 20min restart...speed is 26MHs I try driver 17.5.1, also try this http://1stminingrig.com/run-6-rx-570-rx-580-gpus-windows-10 now msiAfterburner brok for 5min.... Is this card shit or motherboard or what? at least u still got 26MHs my 5 x PowerColor RX570 only gives me 21-22MHs zzz
|
|
|
|
frostminer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 12:06:57 AM |
|
why are you trying to access the bios chip anyways, you do realize "flashing the bios" has nothing to do with exposing bright light to an exposed semiconductor right? omg, i almost died laughing. Was going to thank you for the laugh.. but u almost killed me, so, no.
|
|
|
|
smaxz
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 430
Merit: 253
VeganAcademy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 02:53:49 AM |
|
why are you trying to access the bios chip anyways, you do realize "flashing the bios" has nothing to do with exposing bright light to an exposed semiconductor right? omg, i almost died laughing. Was going to thank you for the laugh.. but u almost killed me, so, no. yeah you know if i had set it up with the original post and then replied (which i've never done myself but with some of these threads i really wonder) then i could accept the gratitude.. but i really don't know what this dude is on about, i think he literally wants to flash high power led's onto his chip to clear the memory. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Ffunkyimg.com%2Fi%2F2uw2t.jpg&t=665&c=UrR97g5o1NKKPw)
|
- NGdTwHRSdnThdi1drQuHGT3khAHRtZ1HMq -
|
|
|
Mattthev
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 07:05:46 AM |
|
at least u still got 26MHs
my 5 x PowerColor RX570 only gives me 21-22MHs
zzz
You need mod the bios, link in my signature.
|
|
|
|
chohav
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 08:12:07 AM |
|
why are you trying to access the bios chip anyways, you do realize "flashing the bios" has nothing to do with exposing bright light to an exposed semiconductor right? omg, i almost died laughing. Was going to thank you for the laugh.. but u almost killed me, so, no. yeah you know if i had set it up with the original post and then replied (which i've never done myself but with some of these threads i really wonder) then i could accept the gratitude.. but i really don't know what this dude is on about, i think he literally wants to flash high power led's onto his chip to clear the memory. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Ffunkyimg.com%2Fi%2F2uw2t.jpg&t=665&c=UrR97g5o1NKKPw) LOL ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) I was just going to answer OP's post when saw yours and the next 2 min wasn't able to breath.
|
|
|
|
cuteboy111
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 08:32:43 AM |
|
at least u still got 26MHs
my 5 x PowerColor RX570 only gives me 21-22MHs
zzz
You need mod the bios, link in my signature. Hi Mattthev, very very useful guide ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) My 570s are Hynix its still ok rite ? and also u mention mod the bios and uninstall the drivers .. theres 1 issue i faced . with modded bios i cant seem to boot up 5-6 cards P.S. : is 1000w enough to power up 6 RX 570 (powercolor)
|
|
|
|
RiNGA
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 10:45:01 AM |
|
why are you trying to access the bios chip anyways, you do realize "flashing the bios" has nothing to do with exposing bright light to an exposed semiconductor right? omg, i almost died laughing. Was going to thank you for the laugh.. but u almost killed me, so, no. yeah you know if i had set it up with the original post and then replied (which i've never done myself but with some of these threads i really wonder) then i could accept the gratitude.. but i really don't know what this dude is on about, i think he literally wants to flash high power led's onto his chip to clear the memory. http://funkyimg.com/i/2uw2t.jpgLOL ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) I was just going to answer OP's post when saw yours and the next 2 min wasn't able to breath. lol, let me say it one more time as you guys missmatched it all ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) 1st CASE - I bought "like new" Aorus XTR 8GB card, its LED was not working and somebody played with timings already. As it has no bios switch I am not able to return it back to original bios without somebody sending me original BIOS for this card. Its LED is not working but it is not mechanicaly broken or unplugged as if I restart PC it flashes for half second. Or do you have any idea how or where to fix that LED settings? 2nd CASE - I bought new Gigabyte G1 8GB, my pc frozen while flashing BIOS via atiflash. Now card is a ZOMBIE. No PC turn on while that card is connected. I wanted to access its BIOS and reset it but I cannot cause that cooler is sticking too hard and without removing cooler I cannot access screws which hold the backplate. Got it? So that card is dead and I probably cant reset BIOS any other way yes? Need to send it back for warranty? How to prevent this crazy atiflash from frozing my pc? It happened already 2 times from 24 cards I have, I have 2 zombie cards ffs, it is rly retarded. Why it works 22 times with no problem and two times crashes/freez and this is it, zombo cards...
|
|
|
|
Pennywis3 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 11:39:06 AM |
|
Thats why its better to buy dual bios cards. I had atiflash fail on me too many times to risk cards like that.
|
|
|
|
RiNGA
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 02:36:23 PM |
|
Thats why its better to buy dual bios cards. I had atiflash fail on me too many times to risk cards like that.
But if you killed card, did they fixed it within warranty? Dual Bios cards I have only Sapphire Nitros nothing else, I have here like 10 different models, and only Nitro have dual bios...
|
|
|
|
kcheel
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 04:46:33 PM |
|
Got a 2nd rig running couple of weeks ago using MSI RX580 Gaming 4GB cards on a H81 Pro BTC board. I still can't get the 6th GPU to work in it, crashes on boot every time. So finally decided to take a break on that and try to tweak the cards. They ran at 22.4 each stock, then at 25ish after changing the memory straps. Now I am currently getting 27.8 on each card after running Afterburner at -30 Core Voltage, 1155 Core Clock, 1900 Memory Clock. Hope to play around with those settings some more this week. Then will attempt to try and get the 6th card running again.
|
|
|
|
smaxz
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 430
Merit: 253
VeganAcademy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 05:40:15 PM |
|
But if you killed card, did they fixed it within warranty? Dual Bios cards I have only Sapphire Nitros nothing else, I have here like 10 different models, and only Nitro have dual bios...
1st CASE - I bought "like new" Aorus XTR 8GB card, its LED was not working and somebody played with timings already. As it has no bios switch I am not able to return it back to original bios without somebody sending me original BIOS for this card. Its LED is not working but it is not mechanicaly broken or unplugged as if I restart PC it flashes for half second. Or do you have any idea how or where to fix that LED settings?
2nd CASE - I bought new Gigabyte G1 8GB, my pc frozen while flashing BIOS via atiflash. Now card is a ZOMBIE. No PC turn on while that card is connected. I wanted to access its BIOS and reset it but I cannot cause that cooler is sticking too hard and without removing cooler I cannot access screws which hold the backplate. Got it? So that card is dead and I probably cant reset BIOS any other way yes? Need to send it back for warranty?
How to prevent this crazy atiflash from frozing my pc? It happened already 2 times from 24 cards I have, I have 2 zombie cards ffs, it is rly retarded. Why it works 22 times with no problem and two times crashes/freez and this is it, zombo cards...
The LED is user adjustable.. if the previous owner changed timings it is very likely he disabled the LED as well. Did your card arrive with the aorus graphics engine software cd? i found it made my system act funny but you can set the color of the led's, pattern of the flash/pulse and whether you want it on at all. install that software and you will be able to turn the LED back on provided it will work with the adjusted strap. your default straps for aorus rx series hynix ram are: 2000: BBB000000000000022889D0073EE8D53805515133ECF560C004E26017E0514206A8900A0020031201C143840C5303F17 1750: 999000000000000022559D0031627C489055131339CDD50A004C06017D0514206A8900A00200312019123037AD2C3A17 1625: 999000000000000022559D0010DE7B4480551312B78C450A004C0601750414206A8900A00200312018112D34A42A3816 1500: 777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A002003120150F292F94273116 1425: 777000000000000022339D00CE516A3B805511112FCBD408004AE6006C0014206A8900A002003120150F272D8D263015
I personally would not use a daily usage computer to flash cards, particularly if you're using windows due to unknown malware or virus or even just extra services you may be unaware of running on your system. try to have an old box with free pci slot you can boot freedos to and flash from there if possible. as for your ZOMBIE card i'm still at a loss as to what you're trying to do. there is no jumper on the pcb to reset bios although that would be a nice option even on dual boot equipped cards. "access" the bios has nothing to do with tearing down a card or removing it's cooler. you should be able to revive it somehow if you search around and find a similar scenario to what you are experiencing.
|
- NGdTwHRSdnThdi1drQuHGT3khAHRtZ1HMq -
|
|
|
Pennywis3 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 05:50:34 PM |
|
Thats why its better to buy dual bios cards. I had atiflash fail on me too many times to risk cards like that.
But if you killed card, did they fixed it within warranty? Dual Bios cards I have only Sapphire Nitros nothing else, I have here like 10 different models, and only Nitro have dual bios... Really depends on where you bought it. Some stores just send you new ones right away if they are in stock. But some send them to the manufactuer, and if they test it and see you messed with the bios, your warranty is void and you will just get the same card back.
|
|
|
|
carlo_0000
Legendary
Offline
Activity: 1281
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 06:33:22 PM |
|
at least u still got 26MHs
my 5 x PowerColor RX570 only gives me 21-22MHs
zzz
You need mod the bios, link in my signature. Hi Mattthev, very very useful guide ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) My 570s are Hynix its still ok rite ? and also u mention mod the bios and uninstall the drivers .. theres 1 issue i faced . with modded bios i cant seem to boot up 5-6 cards P.S. : is 1000w enough to power up 6 RX 570 (powercolor) no it s not you need 1200w (undervolt also) i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
|
|
|
|
Mattthev
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 07:07:29 PM |
|
no it s not you need 1200w (undervolt also) i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
1000W for 6 GPU is enough. With proper undervolting absolutly no problem.
|
|
|
|
RiNGA
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 07:28:23 PM |
|
Got a 2nd rig running couple of weeks ago using MSI RX580 Gaming 4GB cards on a H81 Pro BTC board. I still can't get the 6th GPU to work in it, crashes on boot every time. So finally decided to take a break on that and try to tweak the cards. They ran at 22.4 each stock, then at 25ish after changing the memory straps. Now I am currently getting 27.8 on each card after running Afterburner at -30 Core Voltage, 1155 Core Clock, 1900 Memory Clock. Hope to play around with those settings some more this week. Then will attempt to try and get the 6th card running again.
Have you switched the PCI-E 16 slot to Ver2 in bios? also I am using preffered gpu Onboard. Try it ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
RiNGA
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 07:34:27 PM |
|
But if you killed card, did they fixed it within warranty? Dual Bios cards I have only Sapphire Nitros nothing else, I have here like 10 different models, and only Nitro have dual bios...
1st CASE - I bought "like new" Aorus XTR 8GB card, its LED was not working and somebody played with timings already. As it has no bios switch I am not able to return it back to original bios without somebody sending me original BIOS for this card. Its LED is not working but it is not mechanicaly broken or unplugged as if I restart PC it flashes for half second. Or do you have any idea how or where to fix that LED settings?
2nd CASE - I bought new Gigabyte G1 8GB, my pc frozen while flashing BIOS via atiflash. Now card is a ZOMBIE. No PC turn on while that card is connected. I wanted to access its BIOS and reset it but I cannot cause that cooler is sticking too hard and without removing cooler I cannot access screws which hold the backplate. Got it? So that card is dead and I probably cant reset BIOS any other way yes? Need to send it back for warranty?
How to prevent this crazy atiflash from frozing my pc? It happened already 2 times from 24 cards I have, I have 2 zombie cards ffs, it is rly retarded. Why it works 22 times with no problem and two times crashes/freez and this is it, zombo cards...
The LED is user adjustable.. if the previous owner changed timings it is very likely he disabled the LED as well. Did your card arrive with the aorus graphics engine software cd? i found it made my system act funny but you can set the color of the led's, pattern of the flash/pulse and whether you want it on at all. install that software and you will be able to turn the LED back on provided it will work with the adjusted strap. your default straps for aorus rx series hynix ram are: 2000: BBB000000000000022889D0073EE8D53805515133ECF560C004E26017E0514206A8900A0020031201C143840C5303F17 1750: 999000000000000022559D0031627C489055131339CDD50A004C06017D0514206A8900A00200312019123037AD2C3A17 1625: 999000000000000022559D0010DE7B4480551312B78C450A004C0601750414206A8900A00200312018112D34A42A3816 1500: 777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A002003120150F292F94273116 1425: 777000000000000022339D00CE516A3B805511112FCBD408004AE6006C0014206A8900A002003120150F272D8D263015
I personally would not use a daily usage computer to flash cards, particularly if you're using windows due to unknown malware or virus or even just extra services you may be unaware of running on your system. try to have an old box with free pci slot you can boot freedos to and flash from there if possible. as for your ZOMBIE card i'm still at a loss as to what you're trying to do. there is no jumper on the pcb to reset bios although that would be a nice option even on dual boot equipped cards. "access" the bios has nothing to do with tearing down a card or removing it's cooler. you should be able to revive it somehow if you search around and find a similar scenario to what you are experiencing. The thing is they came with Samsung memories. All 3 Aorus I have showing Samsung in GPU-Z and also in BIOS there is 0x21, I guess thats Samsung for sure. I do not know which other things he could change in bios so rly if anyone have Aorus XTR 8GB PLS LET ME KNOW.
|
|
|
|
kcheel
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 07:41:15 PM |
|
Got a 2nd rig running couple of weeks ago using MSI RX580 Gaming 4GB cards on a H81 Pro BTC board. I still can't get the 6th GPU to work in it, crashes on boot every time. So finally decided to take a break on that and try to tweak the cards. They ran at 22.4 each stock, then at 25ish after changing the memory straps. Now I am currently getting 27.8 on each card after running Afterburner at -30 Core Voltage, 1155 Core Clock, 1900 Memory Clock. Hope to play around with those settings some more this week. Then will attempt to try and get the 6th card running again.
Have you switched the PCI-E 16 slot to Ver2 in bios? also I am using preffered gpu Onboard. Try it ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I have changed it to Gen 2 in the BIOS but have not tried setting preferred to Onboard, will give that a try, thanks.
|
|
|
|
|