AMD Rebrand - RX570 / RX580 - Official Thread

[mafiarob]

Another problem;

After flashing I see one of my rx580's as Polaris 10. I tried reverting it back to original bios but still the same.

http://imgur.com/a/WE8xX

Also I cannot see the fan of that GPU. Claymore only shows gpu0..Any ideas why that might happen?

PS: I only flashed the card that is identified as Polaris 10

Try this Polaris BIOS Editor

https://github.com/jaschaknack/PolarisBiosEditor/tree/110aa3a5a0aeafe16bb0a96b53583e7e8e77999b

I used this one.

I have the same problem with one of my msi rx580 armor 8gb. After one week stop to work, in windows device manager says that windows has stopped the gpu because of a problem and with ati flash (before flashing) the bios change from rx580 series to polaris 10. I try everything but nothing... did you resolve? thanks.

[carlo_0000]

no it s not you need 1200w (undervolt also)
i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w  on eth was dualmining i think, now i remove dual because i keep my ether

1000W for 6 GPU is enough. With proper undervolting absolutly no problem.

right i check my ring undervolt it s using 752W for 5x 570  on ether
but if you do dualmining it s use up to 1000

[Utrine]

no it s not you need 1200w (undervolt also)
i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w  on eth was dualmining i think, now i remove dual because i keep my ether

1000W for 6 GPU is enough. With proper undervolting absolutly no problem.

right i check my ring undervolt it s using 752W for 5x 570  on ether
but if you do dualmining it s use up to 1000

Is it more profitable to dual mine?

[spyshagg]

no it s not you need 1200w (undervolt also)
i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w  on eth was dualmining i think, now i remove dual because i keep my ether

1000W for 6 GPU is enough. With proper undervolting absolutly no problem.

right i check my ring undervolt it s using 752W for 5x 570  on ether
but if you do dualmining it s use up to 1000

You could undervolt more.  My 5x570 are consuming 530w at the wall (eth) Doing 28Mh/s each.  The cpu/board/ram alone consumes ~70w

[rodrigodims]

Hey guys !
Someone have values for this card ?

MSI armor Fx 580 4gb OC hynix memory

https://www.amazon.com/MSI-RX-580-ARMOR-4G/dp/B06XZZ93FQ/ref=sr_1_fkmr0_1?ie=UTF8&qid=1498056302&sr=8-1-fkmr0&keywords=fx+580+armor



Ty !

[Mattthev]

Hey guys !
Someone have values for this card ?

MSI armor Fx 580 4gb OC hynix memory

https://www.amazon.com/MSI-RX-580-ARMOR-4G/dp/B06XZZ93FQ/ref=sr_1_fkmr0_1?ie=UTF8&qid=1498056302&sr=8-1-fkmr0&keywords=fx+580+armor



Ty !

Why you spam this ref link on all over the forum?

[rodrigodims]

Hey guys !
Someone have values for this card ?

MSI armor Fx 580 4gb OC hynix memory

https://www.amazon.com/MSI-RX-580-ARMOR-4G/dp/B06XZZ93FQ/ref=sr_1_fkmr0_1?ie=UTF8&qid=1498056302&sr=8-1-fkmr0&keywords=fx+580+armor



Ty !

Why you spam this ref link on all over the forum?

spam ? are you crazy ? is my 2nd post and the first is on RX570 Thread, i think is better here because ppl are talking about rx 580 too
so If you are angry for some reason, try not to get angry with anyone, take a deep breath and you will feel better

[Mattthev]

spam ? are you crazy ? is my 2nd post and the first is on RX570 Thread, i think is better here because ppl are talking about rx 580 too
so If you are angry for some reason, try not to get angry with anyone, take a deep breath and you will feel better

So why you post this with referral link and not normal link?

[rodrigodims]

spam ? are you crazy ? is my 2nd post and the first is on RX570 Thread, i think is better here because ppl are talking about rx 580 too
so If you are angry for some reason, try not to get angry with anyone, take a deep breath and you will feel better

So why you post this with referral link and not normal link?

what do you mean with "referal link" ?

[fr4nkthetank]

There is no referral link in there, I know it says ref=xxxx? but on amazon a referral link is represented by tag=xxx?

[rodrigodims]

There is no referral link in there, I know it says ref=xxxx? but on amazon a referral link is represented by tag=xxx?

i just do a search on amazon.com and copy the link

[Mattthev]

Oh, my apologies. I don't have links from amazon like that.

[rodrigodims]

Oh, my apologies. I don't have links from amazon like that.

No problem
anyone can answer the original question ?

[carlo_0000]

no it s not you need 1200w (undervolt also)
i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w  on eth was dualmining i think, now i remove dual because i keep my ether

1000W for 6 GPU is enough. With proper undervolting absolutly no problem.

right i check my ring undervolt it s using 752W for 5x 570  on ether
but if you do dualmining it s use up to 1000

Is it more profitable to dual mine?

yes it is (if you don't count electricity cost), but not all days, if you do multi algo and auto exchange,
but if you keep your coins to sell later than no it s not

no it s not you need 1200w (undervolt also)
i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w  on eth was dualmining i think, now i remove dual because i keep my ether

1000W for 6 GPU is enough. With proper undervolting absolutly no problem.

right i check my ring undervolt it s using 752W for 5x 570  on ether
but if you do dualmining it s use up to 1000

You could undervolt more.  My 5x570 are consuming 530w at the wall (eth) Doing 28Mh/s each.  The cpu/board/ram alone consumes ~70w

ok but i did not really try to get lower, what speed you running at and what timming you used ?
530w is impressive
i did not lot of test on rx570  because my rx470 i could not undervolt more so i just keep same voltage on rx570 and clock  because it s mostly the same gpu

[spyshagg]

no it s not you need 1200w (undervolt also)
i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w  on eth was dualmining i think, now i remove dual because i keep my ether

1000W for 6 GPU is enough. With proper undervolting absolutly no problem.

right i check my ring undervolt it s using 752W for 5x 570  on ether
but if you do dualmining it s use up to 1000

Is it more profitable to dual mine?

yes it is (if you don't count electricity cost), but not all days, if you do multi algo and auto exchange,
but if you keep your coins to sell later than no it s not

no it s not you need 1200w (undervolt also)
i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w  on eth was dualmining i think, now i remove dual because i keep my ether

1000W for 6 GPU is enough. With proper undervolting absolutly no problem.

right i check my ring undervolt it s using 752W for 5x 570  on ether
but if you do dualmining it s use up to 1000

You could undervolt more.  My 5x570 are consuming 530w at the wall (eth) Doing 28Mh/s each.  The cpu/board/ram alone consumes ~70w

ok but i did not really try to get lower, what speed you running at and what timming you used ?
530w is impressive
i did not lot of test on rx570  because my rx470 i could not undervolt more so i just keep same voltage on rx570 and clock  because it s mostly the same gpu

that screenshot was @ 1090/1950 0.831v (drops to 0.81 under load).  Dual mining stable except one one card which needs more.

Dual mining increases each card by ~ 25w, so + 125w above the 530.

[Jamievs]

God dammit... now its really reallly impossible to get any AMD gpus.

I might get one batch in july, which was expected in june.... the rest is pushed to august. Earliest.

Yeah it's frustrating isn't it.

[budiselich]

Hi,

i have problem with my 2x Sapphire RX580 Nitro+ 8GB Hynix rig.

1. I was perfectly dual mine for 1 month 60mh/s ETH + 1150 MH/s SIA, with latest drivers. Suddenly my rig goes green screen, sometimes blue screen. Downgraded drivers to 17.4.3 and 17.4.4, same problem.
But sometimes when I run only eth mining, then works, but not always. And then I can dual mine also, but it is strange that first I need to run eth only mining then close miner and start again dual mine. This is not working always.

2. One more thing, my cards are same and each gives 30.3 mh/s, but sometimes hashrate of one card drops to 27 for few second and returns to 30.3, and then again after 30-60 sec. Second card is stable to 30.3. This started to happen when I put my second card in rig, without that second card first card was also stable to 30.3.


Any help for this 2 problems? :/

Thanks!

[frostminer]

God dammit... now its really reallly impossible to get any AMD gpus.

I might get one batch in july, which was expected in june.... the rest is pushed to august. Earliest.

Yeah it's frustrating isn't it.

Hmm, what epoch will we be at then. I guess i have to start calcing in a 30% hash loss

[spelunker]

Does anyone know why Gigabyte Aorus or MSI RX580s are using almost 180W per card once mining ETH at 1425 clock and 2175 mem with flashed BIOS just copying 1750 timing values to 2000. If I use stock clocks the cards still eat around 160W, where this video shows the same exact cards and timings get 110W per card. I am getting the right 29-30MH/s rate but this power consumption is insane. Please advise.

https://www.youtube.com/watch?v=HiX1Sm4ZGZE

[m0bilitee]

Does anyone know why Gigabyte Aorus or MSI RX580s are using almost 180W per card once mining ETH at 1425 clock and 2175 mem with flashed BIOS just copying 1750 timing values to 2000. If I use stock clocks the cards still eat around 160W, where this video shows the same exact cards and timings get 110W per card. I am getting the right 29-30MH/s rate but this power consumption is insane. Please advise.

https://www.youtube.com/watch?v=HiX1Sm4ZGZE

Have you undervolted the GPU and RAM at all?