AMD Rebrand - RX570 / RX580 - Official Thread

[Luisjc69]

Good morning ,

I have the Powercolor RX580 8Giga (Hyn).....my question, with this cards is only max. 27,5MH/s possible to mining?

I had change a lot of things, but everytime the same value 27!

Maybe is that the best one with Powercolor?? or you have someone idea more for me??

I had flash BIOS a lot of times with different values.....nothing change!


Thanks guys for help

Greetings
Luisa

Is it a red devil/red dragon one?

Sorry....that is a RED DEVIL! and I had try all what I see in youtube for example....no more then 27 and I think the problem are the Powercolor card??

[1714236010]

1714236010

[1714236010]

1714236010

[JustCauseBIH]

Hi there,

how to undervolt using watttool? I have RX 570 asus expedition 4GB OC. Can anyone help me what settings to use for undevolting?

Im not quite sure what to change and how to test it by best way.

[Firekiller]

Good morning ,

I have the Powercolor RX580 8Giga (Hyn).....my question, with this cards is only max. 27,5MH/s possible to mining?

I had change a lot of things, but everytime the same value 27!

Maybe is that the best one with Powercolor?? or you have someone idea more for me??

I had flash BIOS a lot of times with different values.....nothing change!


Thanks guys for help

Greetings
Luisa

Is it a red devil/red dragon one?

Sorry....that is a RED DEVIL! and I had try all what I see in youtube for example....no more then 27 and I think the problem are the Powercolor card??

Use bios uploaded/made by anoraknophobia
https://anorak.tech/t/powercolor-rx580-red-devil-8gb-hynix/11180/22

Check hwinfo for any memory issues. Then if needed, downclock mems by 50 MHz and it should be fine.

[esh777]

Gigabyte Gaming 580 is running a steady 29-30mh/s, Aorus is absolutely no different, MSI Armor I bitched about before are actually the best cards at 30-31mh/s. Red Devil's arriving tomorrow.........and I'm out of boards.

So far the MSI X170a gaming m5 has been a clusterfuck bitch trying to get to run more than 4 cards, instead of 7. Still looking for a solution :\

Bro how did you achieve 30mh/s on Gigabyte Gaming 580 8g? is this Hynix ram?

Please help I am struggling with 25mh/s and a 6 rig is drawing 1400 watts

[Luisjc69]

Good morning ,

I have the Powercolor RX580 8Giga (Hyn).....my question, with this cards is only max. 27,5MH/s possible to mining?

I had change a lot of things, but everytime the same value 27!

Maybe is that the best one with Powercolor?? or you have someone idea more for me??

I had flash BIOS a lot of times with different values.....nothing change!


Thanks guys for help

Greetings
Luisa

Is it a red devil/red dragon one?

Sorry....that is a RED DEVIL! and I had try all what I see in youtube for example....no more then 27 and I think the problem are the Powercolor card??

Use bios uploaded/made by anoraknophobia
https://anorak.tech/t/powercolor-rx580-red-devil-8gb-hynix/11180/22

Check hwinfo for any memory issues. Then if needed, downclock mems by 50 MHz and it should be fine.

Hello...THANK YOU VERY MUCH!!

Now is working with 30,4MH/s and "only" 110Watt.....i hope I can reduce to 100Watt..

Thank you for help!

Greetings
Luisa

[ne0x86]

Hi, I flashed my nitro+ rx580 4gb (hynix) with 1:1500 & 2:1500 straps.

But check this fluctuation in power;

https://i.imgur.com/qY18MIb.png

its normal or too much undervolt?

thanks

[carlo_0000]

The only difference between these and the 470/480 is that they have a slightly better silicon lottery and can be clocked a little higher than the 4xx series.

Even if the clock is better on 5xx series, memory lottery still the same as 4xx series. There are cards which sucks on core and the memory is great and vice versa, now hitting mem and core lottery is hard. Some cards have 0 memory errors at 2250 and some cant even reach 2100 with 0 errors, same voltage settings and straps.

mine sapphire rx470 4g & rx570 4G won't past 1900-1910 in memory stable, i tested not all the 570 only 2, there crash directly at 1950 so did not make any more test put them at 1900 like my rx 470

[ne0x86]

I have 5x rx580 shappire nitro+ 4GB. Only changing straps and undervolting/underclocking in MSI AB it consumes 1050w eth+dcr

Now I do an own bios and can low it to 950W. Its a good consumption?

1100/2050mhz

Thanks

[vuli]

Good morning ,

I have the Powercolor RX580 8Giga (Hyn).....my question, with this cards is only max. 27,5MH/s possible to mining?

I had change a lot of things, but everytime the same value 27!

Maybe is that the best one with Powercolor?? or you have someone idea more for me??

I had flash BIOS a lot of times with different values.....nothing change!


Thanks guys for help

Greetings
Luisa

Is it a red devil/red dragon one?

Sorry....that is a RED DEVIL! and I had try all what I see in youtube for example....no more then 27 and I think the problem are the Powercolor card??

Use bios uploaded/made by anoraknophobia
https://anorak.tech/t/powercolor-rx580-red-devil-8gb-hynix/11180/22

Check hwinfo for any memory issues. Then if needed, downclock mems by 50 MHz and it should be fine.

Hello...THANK YOU VERY MUCH!!

Now is working with 30,4MH/s and "only" 110Watt.....i hope I can reduce to 100Watt..

Thank you for help!

Greetings
Luisa

110W  for 30Mh/s and only minig eth is a lot, if you mine dual than its ok.

[vuli]

Hi, I flashed my nitro+ rx580 4gb (hynix) with 1:1500 & 2:1500 straps.

But check this fluctuation in power;



its normal or too much undervolt?

thanks

try  to lower gpu clock to 1215MHz or even lower if it doesnt stop doing that,

[Marvell1]

Good morning ,

I have the Powercolor RX580 8Giga (Hyn).....my question, with this cards is only max. 27,5MH/s possible to mining?

I had change a lot of things, but everytime the same value 27!

Maybe is that the best one with Powercolor?? or you have someone idea more for me??

I had flash BIOS a lot of times with different values.....nothing change!


Thanks guys for help

Greetings
Luisa

Is it a red devil/red dragon one?

Sorry....that is a RED DEVIL! and I had try all what I see in youtube for example....no more then 27 and I think the problem are the Powercolor card??

Use bios uploaded/made by anoraknophobia
https://anorak.tech/t/powercolor-rx580-red-devil-8gb-hynix/11180/22

Check hwinfo for any memory issues. Then if needed, downclock mems by 50 MHz and it should be fine.

Hello...THANK YOU VERY MUCH!!

Now is working with 30,4MH/s and "only" 110Watt.....i hope I can reduce to 100Watt..

Thank you for help!

Greetings
Luisa

110W  for 30Mh/s and only minig eth is a lot, if you mine dual than its ok.

that seems pretty standard to me, you have to rasie. power limit now due to the dag bug on rx cards or core to keep higher hashrates so they will use more power than they used to

[batman3]

Hi,
Did someone have this issue...i have rig 2 month and in start works 180-182 Mh/s
I nothing change all time work with same settings, now speed is 170-174 Mh/s.

What is going on i dont know...
cards are RX 480 sapphire 4GB

[bubislav]

Hi,
Did someone have this issue...i have rig 2 month and in start works 180-182 Mh/s
I nothing change all time work with same settings, now speed is 170-174 Mh/s.

What is going on i dont know...
cards are RX 480 sapphire 4GB

dag is going futher .... so your performance will drop from now on all amd cards .....
eventualy to 10mh per card on ethereum

[chohav]

Hi,
Did someone have this issue...i have rig 2 month and in start works 180-182 Mh/s
I nothing change all time work with same settings, now speed is 170-174 Mh/s.

What is going on i dont know...
cards are RX 480 sapphire 4GB

It is normal.
http://cryptomining-blog.com/8822-ethereum-hashrate-drop-for-radeon-rx400rx500-gpus-is-incoming/

[grchina]

Is DAG going to have affect only on eth or etc and exp gonna have same problem?

[fr4nkthetank]

Its pretty much only for Ethereum so far, so expanse or other smaller dagger coins should be okay.  4g or 8g models, it doesnt matter.  In any case, now they might reduce the block reward and increase block time so that will impact things also...I wouldnt be buying any rx470s at inflated prices.

[batman3]

Hi,
i have rx 570 4GB asus rog strix and they are very very unstable... i tried somethings but nothing help my speed now is 25.5-25.9.
memory is elpida, in bios i change only straps copy...is enything else what i need to try...driver,bios,....i donot now...something
also every few hours i must restart pc, claymor stop...

[fr4nkthetank]

Dont worry about the DAG epoch, It seems that AMD fixed that for VEGA and will fix it in the future for Pascal with a driver update of some sort.

[FloppyPurpleGherkin]

Can you run 6x 580's on windows 7? I've tried all the patchers I can find yet I still get code 43 on the 6th GPU, 5 working fine :/

[carlo_0000]

Can you run 6x 580's on windows 7? I've tried all the patchers I can find yet I still get code 43 on the 6th GPU, 5 working fine :/

yes you can with the 6gpu patcher