EnerJay
Newbie
Offline
Activity: 14
Merit: 0
|
|
November 02, 2017, 12:33:38 AM |
|
You need to run the cli with the flags to be able to import your paper wallet: electroneum-wallet-cli --generate-from-keys WALLET
Thank you Enerjay. This was the most useful post in this thread for me. I was missing the "generate from keys" flag. However, I have been mining all day at 1300 h/s and it says Balance 0.00, unlocked balance 0.00 Any insight? I've been having the same problem.. i think it's because i'm not part of the pool.. i was mining on my own.. about to start mining using the pool. Thank you for the info EnerJay. Quick question, I have been able to start mining on the direct mac miner, providing my paper wallet. However, when I access "electroneum-wallet-cli", how do I run the flags? I get: "Specify wallet file name (e.g., MyWallet). If the wallet doesn't exist, it will be created. Wallet file name (or Ctrl-C to quit):", when I enter: "--generate-from-keys WALLET" (without quotes) I get the following message: "No wallet found with that name. Confirm creation of new wallet named: --generate-from-keys MyWallet (Y/Yes/N/No):" I don't seem to get the prompt to enter my public address and private key. Thanks! Okay so you're running the "electroneum-wallet-cli" from the commandline right? terminal? so instead of just using it on it's own like that you need to run it with the flags: electroneum-wallet-cli --generate-from-keys WALLET
where WALLET is the name of the new wallet file you want to generate from your paper wallet.. Also, everyone who wants to transfer to the exchange: only the miners can sell at the moment since all the ICO money is still stuck on the Electroneum website. If you are a miner and you want to transfer to Cryptopia, download the "Direct Miner" for your OS from https://downloads.electroneum.com/ and then create a wallet file from the paper wallet you've been mining to using the method above. Once you have a wallet file, close the cli. Now you need to start the daemon by running the "electroneumd" file. This will sync the blockchain. Wait for it to complete and do NOT close it before you do the next step. Next, relaunch the cli without the flags (in a new terminal window). Then enter the name of the wallet file you created. Once you have done this it will sync with the daemon and your funds should show up. Once your funds are all there, you should be able to use the "transfer" command of the cli.. type "help" to see the syntax
|
|
|
|
Bonanzacoin
|
|
November 02, 2017, 12:35:12 AM |
|
Was it allready 80 cent? holy moly.
|
|
|
|
armaggedon
Sr. Member
Offline
Activity: 325
Merit: 250
Made a mistake on selling account ddnt read rules
|
|
November 02, 2017, 12:39:03 AM |
|
OOOHHH GOOD THING ETN is already on coinmarketcap with a price of $0.107 21B supply atleast its on CMC
|
Please dont mind my reputation. i made a mistake of selling my account. i dont even know that selling of account is prohibited. its my fault cause i dont read the rules
|
|
|
felipeintheend
Member
Offline
Activity: 83
Merit: 10
|
|
November 02, 2017, 12:39:32 AM |
|
You need to run the cli with the flags to be able to import your paper wallet: electroneum-wallet-cli --generate-from-keys WALLET
Thank you Enerjay. This was the most useful post in this thread for me. I was missing the "generate from keys" flag. However, I have been mining all day at 1300 h/s and it says Balance 0.00, unlocked balance 0.00 Any insight? I've been having the same problem.. i think it's because i'm not part of the pool.. i was mining on my own.. about to start mining using the pool. Thank you for the info EnerJay. Quick question, I have been able to start mining on the direct mac miner, providing my paper wallet. However, when I access "electroneum-wallet-cli", how do I run the flags? I get: "Specify wallet file name (e.g., MyWallet). If the wallet doesn't exist, it will be created. Wallet file name (or Ctrl-C to quit):", when I enter: "--generate-from-keys WALLET" (without quotes) I get the following message: "No wallet found with that name. Confirm creation of new wallet named: --generate-from-keys MyWallet (Y/Yes/N/No):" I don't seem to get the prompt to enter my public address and private key. Thanks! Okay so you're running the "electroneum-wallet-cli" from the commandline right? terminal? so instead of just using it on it's own like that you need to run it with the flags: electroneum-wallet-cli --generate-from-keys WALLET
where WALLET is the name of the new wallet file you want to generate from your paper wallet.. Also, everyone who wants to transfer to the exchange: only the miners can sell at the moment since all the ICO money is still stuck on the Electroneum website. If you are a miner and you want to transfer to Cryptopia, download the "Direct Miner" for your OS from https://downloads.electroneum.com/ and then create a wallet file from the paper wallet you've been mining to using the method above. Once you have a wallet file, close the cli. Now you need to start the daemon by running the "electroneumd" file. This will sync the blockchain. Wait for it to complete and do NOT close it before you do the next step. Next, relaunch the cli without the flags (in a new terminal window). Then enter the name of the wallet file you created. Once you have done this it will sync with the daemon and your funds should show up. Once your funds are all there, you should be able to use the "transfer" command of the cli.. type "help" to see the syntax And how Can I create a Wallet with my current address? tried a few ways and no luck
|
|
|
|
Pyroboby7
Member
Offline
Activity: 94
Merit: 10
|
|
November 02, 2017, 12:40:00 AM |
|
Was it allready 80 cent? holy moly. Was... Its about .10 right now.
|
XMG - 95AySiw3GaiTxf5xWBnZLLWkJ9orhyagbx
|
|
|
MinerClub
Member
Offline
Activity: 77
Merit: 10
|
|
November 02, 2017, 12:41:48 AM |
|
You need to run the cli with the flags to be able to import your paper wallet: electroneum-wallet-cli --generate-from-keys WALLET
Thank you Enerjay. This was the most useful post in this thread for me. I was missing the "generate from keys" flag. However, I have been mining all day at 1300 h/s and it says Balance 0.00, unlocked balance 0.00 Any insight? I've been having the same problem.. i think it's because i'm not part of the pool.. i was mining on my own.. about to start mining using the pool. Thank you for the info EnerJay. Quick question, I have been able to start mining on the direct mac miner, providing my paper wallet. However, when I access "electroneum-wallet-cli", how do I run the flags? I get: "Specify wallet file name (e.g., MyWallet). If the wallet doesn't exist, it will be created. Wallet file name (or Ctrl-C to quit):", when I enter: "--generate-from-keys WALLET" (without quotes) I get the following message: "No wallet found with that name. Confirm creation of new wallet named: --generate-from-keys MyWallet (Y/Yes/N/No):" I don't seem to get the prompt to enter my public address and private key. Thanks! Okay so you're running the "electroneum-wallet-cli" from the commandline right? terminal? so instead of just using it on it's own like that you need to run it with the flags: electroneum-wallet-cli --generate-from-keys WALLET
where WALLET is the name of the new wallet file you want to generate from your paper wallet.. Also, everyone who wants to transfer to the exchange: only the miners can sell at the moment since all the ICO money is still stuck on the Electroneum website. If you are a miner and you want to transfer to Cryptopia, download the "Direct Miner" for your OS from https://downloads.electroneum.com/ and then create a wallet file from the paper wallet you've been mining to using the method above. Once you have a wallet file, close the cli. Now you need to start the daemon by running the "electroneumd" file. This will sync the blockchain. Wait for it to complete and do NOT close it before you do the next step. Next, relaunch the cli without the flags (in a new terminal window). Then enter the name of the wallet file you created. Once you have done this it will sync with the daemon and your funds should show up. Once your funds are all there, you should be able to use the "transfer" command of the cli.. type "help" to see the syntax It just isn't working for me. If you can help me figure it out I can give you a nice tip. Thanks again for all of your efforts.
|
Bitrated user: MinerClub.
|
|
|
boba02
|
|
November 02, 2017, 12:42:15 AM |
|
Is anybody mining? What pools are you using?
|
Beware of scam: - Koinbi.com exchange. Fake exchange rates, withdrawals don't work, no way to contact support.
|
|
|
ysakay
|
|
November 02, 2017, 12:42:36 AM |
|
hi guys i try to mine electronum.How can chechk paper wallet ? How can calculate earnings?
|
|
|
|
snowyNNN
Sr. Member
Offline
Activity: 422
Merit: 251
Pasl [Xci-r.i.p.] Eth Zcl Kmd Zen Rep Xmr Sc Neo
|
|
November 02, 2017, 12:43:59 AM |
|
Technical guy here
been mining using the official windows miner - CPU Awesome miner - GPU
both are connected to the official pools
1300 h/s all day using the paper wallet address
ran daemon to download the blockchain
imported address/private spend/ private view with CLI flags
close and reopen cli and still 0 balance
tried this from scratch 3 times
double checked each character of each key (excruciating)
any insight?
Thank you
Did you try mining to a Cryptopia address, if you have one? Just click deposit and you should get one. It doesn´t work. You´d have to use a payment id with the address. Not sure how that would work on the miner & pool. And Cryptopia warns about mining straight their address, as you´d probably not be credited those Electroneums.
|
█▀▀▄░▄▀▀▄░▄▀▀▀░█░░░ Xmr Sc Pasc Rlc Zen ✦ (\__/) ✦ █▀▀░░█▀▀█░░▀▀▄░█░░░ Zcl Kmd Ltc Rep Dash (='.'=) █░░░░█░░█░███▀░███░ Pasl [Xci-r.i.p.] Eth Btc ✦ (")_(") ✦ ▲▼ Anonymous ▲▼ Community Driven XULT.com
|
|
|
nysefloortrader
Member
Offline
Activity: 322
Merit: 10
Ether Addict
|
|
November 02, 2017, 12:45:17 AM |
|
OOOHHH GOOD THING ETN is already on coinmarketcap with a price of $0.107 21B supply atleast its on CMC holy crap. :-0.... hope no dumpers come...LOL
|
|
|
|
cafetools
|
|
November 02, 2017, 12:45:55 AM |
|
do i need to use my paper wallet info to mine?
|
Hoddle long BTC (the mother) and a few others!
|
|
|
ezvm
|
|
November 02, 2017, 12:46:04 AM |
|
who are the ones who have the etn coins in cryptopia??? how can they be carried?? how to transfer etn from paper wallet or ico coins??? the miners are the only ones that can transfer coins from wallet to cryptopia at the moment Not cool... You'd think they would focus on their loyal investors first!
|
|
|
|
cafetools
|
|
November 02, 2017, 12:48:27 AM |
|
OOOHHH GOOD THING ETN is already on coinmarketcap with a price of $0.107 21B supply atleast its on CMC holy crap. :-0.... hope no dumpers come...LOL 13 cents now, I mined 1,975,000 coins already with my octa omega bi tri CPU x64x computer I bought! Everyone is trying to buy, this was undervalued. "It will hit $10 by end of November" - Goldman Sachs, quoted from this evening!
|
Hoddle long BTC (the mother) and a few others!
|
|
|
EnerJay
Newbie
Offline
Activity: 14
Merit: 0
|
|
November 02, 2017, 12:50:01 AM |
|
You need to run the cli with the flags to be able to import your paper wallet: electroneum-wallet-cli --generate-from-keys WALLET
Thank you Enerjay. This was the most useful post in this thread for me. I was missing the "generate from keys" flag. However, I have been mining all day at 1300 h/s and it says Balance 0.00, unlocked balance 0.00 Any insight? I've been having the same problem.. i think it's because i'm not part of the pool.. i was mining on my own.. about to start mining using the pool. Thank you for the info EnerJay. Quick question, I have been able to start mining on the direct mac miner, providing my paper wallet. However, when I access "electroneum-wallet-cli", how do I run the flags? I get: "Specify wallet file name (e.g., MyWallet). If the wallet doesn't exist, it will be created. Wallet file name (or Ctrl-C to quit):", when I enter: "--generate-from-keys WALLET" (without quotes) I get the following message: "No wallet found with that name. Confirm creation of new wallet named: --generate-from-keys MyWallet (Y/Yes/N/No):" I don't seem to get the prompt to enter my public address and private key. Thanks! Okay so you're running the "electroneum-wallet-cli" from the commandline right? terminal? so instead of just using it on it's own like that you need to run it with the flags: electroneum-wallet-cli --generate-from-keys WALLET
where WALLET is the name of the new wallet file you want to generate from your paper wallet.. Also, everyone who wants to transfer to the exchange: only the miners can sell at the moment since all the ICO money is still stuck on the Electroneum website. If you are a miner and you want to transfer to Cryptopia, download the "Direct Miner" for your OS from https://downloads.electroneum.com/ and then create a wallet file from the paper wallet you've been mining to using the method above. Once you have a wallet file, close the cli. Now you need to start the daemon by running the "electroneumd" file. This will sync the blockchain. Wait for it to complete and do NOT close it before you do the next step. Next, relaunch the cli without the flags (in a new terminal window). Then enter the name of the wallet file you created. Once you have done this it will sync with the daemon and your funds should show up. Once your funds are all there, you should be able to use the "transfer" command of the cli.. type "help" to see the syntax And how Can I create a Wallet with my current address? tried a few ways and no luck It's literally right there in the post... You need to run the cli (which you get from downloading the "Direct Miner") using the flags from the command line: electroneum-wallet-cli --generate-from-keys WALLET
where WALLET is the name of the new wallet file. so if you want it step by step: - Open Command Line / Terminal
- Navigate to the location of your "electroneum-wallet-cli" file
- Now type the following:
"electroneum-wallet-cli --generate-from-keys WALLET" and hit enter
- Then the cli will start and ask for your keys.
|
|
|
|
cafetools
|
|
November 02, 2017, 12:53:25 AM |
|
type "electroneum-wallet-cli --generate-from-keys WALLET" with quotes or without?
i pasted electroneum-wallet-cli --generate-from-keys WALLET and it says unknown command
|
Hoddle long BTC (the mother) and a few others!
|
|
|
ZUTEN12000
Copper Member
Newbie
Offline
Activity: 378
Merit: 0
|
|
November 02, 2017, 12:56:27 AM |
|
Technical guy here
been mining using the official windows miner - CPU Awesome miner - GPU
both are connected to the official pools
1300 h/s all day using the paper wallet address
ran daemon to download the blockchain
imported address/private spend/ private view with CLI flags
close and reopen cli and still 0 balance
tried this from scratch 3 times
double checked each character of each key (excruciating)
any insight?
Thank you
Did you try mining to a Cryptopia address, if you have one? Just click deposit and you should get one. It doesn´t work. You´d have to use a payment id with the address. Not sure how that would work on the miner & pool. And Cryptopia warns about mining straight their address, as you´d probably not be credited those Electroneums. nice dont pay who direct mining to their address
|
|
|
|
Dwynr
Jr. Member
Offline
Activity: 33
Merit: 7
|
|
November 02, 2017, 12:57:12 AM |
|
You should use http://pool.electroneum.space/ for pool mining. It has 1% fee instead of 2% or even 4%!
|
|
|
|
EnerJay
Newbie
Offline
Activity: 14
Merit: 0
|
|
November 02, 2017, 12:57:57 AM |
|
type "electroneum-wallet-cli --generate-from-keys WALLET" with quotes or without?
i pasted electroneum-wallet-cli --generate-from-keys WALLET and it says unknown command
To answer your question without quotes. To solve your problem, use ./electroneum-wallet-cli --generate-from-keys WALLET instead.. it just means the cli isn't installed to your usr/bin folder.. forgot about that.. You also might need to be root.. i can't remember if it is necessary but i just used sudo anyway.. so: sudo ./electroneum-wallet-cli --generate-from-keys WALLET not sure what the equivalent of sudo is on mac
|
|
|
|
jackd121
Newbie
Offline
Activity: 23
Merit: 0
|
|
November 02, 2017, 12:58:29 AM |
|
type "electroneum-wallet-cli --generate-from-keys WALLET" with quotes or without?
i pasted electroneum-wallet-cli --generate-from-keys WALLET and it says unknown command
1) are you in the directory where you downloaded the files in the cmd prompt window? 2) if you are on windows try - electroneum-wallet-cli.exe --generate-from-keys WALLET
|
|
|
|
nysefloortrader
Member
Offline
Activity: 322
Merit: 10
Ether Addict
|
|
November 02, 2017, 12:59:41 AM |
|
this is nuts, it looks like 10cents on coinmarket cap.
Buzz started....time to get a beer and popcorn ready LOL. :-)
|
|
|
|
|