Baikal Giant X10

[fuaimo3]

So I am reading that people are doing between 20$ and 60$ per machine per day in that starpool. So for simplicity lets say it is around average of 40$. Is there anyone who can confirm (eventually with a SS) that made two days in a row, or more, more than 50$ per machine per day?

i have provided a few ss of 50 a day. i'm now doing a weekly avg. so far i'm avg 45 a day goes as low as 35 a day as high as close to 60

Apologies if you have already provided this but can you please confirm the entry in the password box.

I use c=BTC,quark,qubit,myr-gr and only those algos

I'm not going to say anything more on the pool though as far as averages other than below, I and the others don't work for starpool, I just wanted to share my experience. I don't want people to get mad at me if they end up having a bad experience. I would never tell anyone where to hash and don't benefit in anyway from more people hashing at starpool in fact it makes the profit maybe a little less with more hashers for me. I think a lot of the people that had a bad experience don't fully understand the pool but that's my guess based on how i'm doing. I can't speak for others. Good luck to all and my attempt was to tell the community about a good paying pool but others may not experience the same. I will be keeping my small farm on here for a week but so far in 48 hours I have avg of close to 50. I started this account 12 am est on Wednesday. I also had a miner go down from time to time for more than an hour.  


This shows 47 hours worth of payments (im due one in an hour)

https://imgur.com/a/3fYX6


if you take the total balance for 47 hour 0.19254745 BTC =  1897.22 \2 (2 days) = 948.61 \20 miners =  47.43

Which is above the average for this machine based on https://www.asicminervalue.com/

Feel free to check my math. This also doesn't include credits still waiting to hit the exchange that I have already mined, and i'm now done with defending the pool just wanted to share my experience. Good luck.

[zoofy]

Who is aware of when ordering this miner in Russia, no problems will be

[julien1502]

How much for 1 baikal giant x10?

[alchi7]

I was on Starpool the last 24 hours. I'm pretty happy with the outcome of 0.3 LTC. My miner had shares for all algos but X11. This is my password line:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5


I tried also single coin mining with nice profit on ALQO. I collected LIZ, LPA, ARGO and CURVE....lets see if I can sell them for a nice price.

All in all Starpool did a nice job for me.

Also tried starpool.biz with same options c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5 but after 24h I got only 0.1LTC (~23$)
Total Unpaid      0.01234102 LTC
Total Paid         0.08882658 LTC
Total Earned      0.10116760 LTC
So this is ever less then nicehash profit - what's wrong with my x10?))) Hashrate according to graphs was OK, switching also OK (worked at all 4 algos but mostly quark and qubit of course)

Not sure my man I just got 55 per miner yesterday. I started a fresh account to keep track. Are you counting credits not yet paid to you? You realize it has to clear the exchange before it will hit your wallet. I am even doing btc which has higher transaction fees.

Also if you are hashing low algo pools like skien they make take a little time to clear. Although some say it's worth it I would take skien out of your rotation if you want payments to be a little higher immediately long term however it may be wise to leave it in.

Yes, unfortunately 0.1LTC is total earned (paid + unpaid)

   Name      Immature      Confirmed         Total   Value*
   Litecoin
(total pending)      0.00817991   0.00425081      0.01243073 LTC
   Balance      0.00264294 LTC
   Total Unpaid   0.01507367 LTC
   Total Paid      0.08882658 LTC
   Total Earned   0.10390025 LTC

If you want your dailys to increase stop hashing skien. You probably have a lot of credits waiting to be mined (it should show you under wallet what percentage you have waiting on what algo). Stay on the higher hash pools to get a better 24 hour.

Unlikely that problem is in skein, it was almost 50\50 quark and qubit  
Here is my wallet https://www.starpool.biz/?address=Lg9UgnzoHTTrvCHf29Z9tJJUvJwqxvPCxU
I really don't understand where is my 60$ daily  
Will wait 1-2 days more and get back to nicehash if nothing changes

Looking at your account you haven't even acquired 24 hours worth of payments yet I only see two which a total balance of 0.13815603 which is over 30 dollars in ltc. wait 24 hours. Also you have some credits waiting in skien. You are miss reading how this pool works and how it pays out credits. This isn't nicehash. In fact people on nicehash mine on star pool to make profit. You can see under miners that they mine there. So unlikely nicehash pays more when they use nicehash to make profit on star pool.

Time   Amount   Tx
6h ago   0.03632029   cccb0649a6e0bda001a5ef08fa5c46668d2bac73a64f48bbe6b3a846b1ae25cc
14h ago   0.05250629   2ff27946e343227546a245cb7a2e43c5ba316c7fac42a931bf8d28bb8df613b8
Total   0.08882658   
   Total Earned      0.13817410 LTC


Percentage of credits waiting:


quark   1   2.7964%   8.8 Gh/s   7.1%
qubit   0   1.0143%   -   
myr-gr   0   0.8423%   1.8 Gh/s   
skein   0   0.4487%   -   

Thanks for you help and comments but right now it is precisely 48h I am on starpool
   Litecoin
(total pending)         0.00038414 LTC
   Balance         0.03321931 LTC
   Total Unpaid      0.03360345 LTC
   Total Paid         0.22598190 LTC
   Total Earned      0.25958535 LTC
So 0.26LTC after 2 days with one X10 is 0.13LTC daily or 30$ 

[crytotronik]

What about awesomeminer and Baikal X10? I have zero experience with that tool. Installed and added my API IP+port. Now I see a external Device, state is "running", but no more infos like hashrate is visible.

Who is more experienced with this tool? Can we use it with X10?

[acyclovir]

What about awesomeminer and Baikal X10? I have zero experience with that tool. Installed and added my API IP+port. Now I see a external Device, state is "running", but no more infos like hashrate is visible.

Who is more experienced with this tool? Can we use it with X10?

Yes you can, set a coin, and a profit profile with baikal supported algos; if pools are not supported by AM, you have to asign a coin to use profit switch, otherwise, you will never see any mining reported value, to take in count to conditioned profit switch

[ismurdegus]

try d=88

My hero.  I had assumed that since the pools said they auto-adjusted the difficulty, I wouldn't need to set it manually, but this setting worked.  Thanks!

I have the same issue with my X10

Where I suppose insert the d=88  ?

Thanks

[d0lph]

try d=88

My hero.  I had assumed that since the pools said they auto-adjusted the difficulty, I wouldn't need to set it manually, but this setting worked.  Thanks!

I have the same issue with my X10

Where I suppose insert the d=88  ?

Thanks

into password

[ismurdegus]

try d=88

My hero.  I had assumed that since the pools said they auto-adjusted the difficulty, I wouldn't need to set it manually, but this setting worked.  Thanks!

I have the same issue with my X10

Where I suppose insert the d=88  ?

Thanks

into password

Hi
Sorry but I am little bit confuse.....

I am mining on xvg-mg.suprnova and the password is the worker password.

Is this will work on xvg-mg.suprnova? If YES, inside the password space I need wrote:  cicciod=88  (my password and d=88) ?

Thanks

[d0lph]

try d=88

My hero.  I had assumed that since the pools said they auto-adjusted the difficulty, I wouldn't need to set it manually, but this setting worked.  Thanks!

I have the same issue with my X10

Where I suppose insert the d=88  ?

Thanks

into password

Hi
Sorry but I am little bit confuse.....

I am mining on xvg-mg.suprnova and the password is the worker password.

Is this will work on xvg-mg.suprnova? If YES, inside the password space I need wrote:  cicciod=88  (my password and d=88) ?

Thanks

need write:
yourpass d=88

[Aimless]

try d=88

My hero.  I had assumed that since the pools said they auto-adjusted the difficulty, I wouldn't need to set it manually, but this setting worked.  Thanks!

I have the same issue with my X10

Where I suppose insert the d=88  ?

Thanks

into password

Hi
Sorry but I am little bit confuse.....

I am mining on xvg-mg.suprnova and the password is the worker password.

Is this will work on xvg-mg.suprnova? If YES, inside the password space I need wrote:  cicciod=88  (my password and d=88) ?

Thanks

need write:
yourpass d=88

Yes, you need to leave a gap between each command

[ismurdegus]

try d=88

My hero.  I had assumed that since the pools said they auto-adjusted the difficulty, I wouldn't need to set it manually, but this setting worked.  Thanks!

I have the same issue with my X10

Where I suppose insert the d=88  ?

Thanks

into password

Hi
Sorry but I am little bit confuse.....

I am mining on xvg-mg.suprnova and the password is the worker password.

Is this will work on xvg-mg.suprnova? If YES, inside the password space I need wrote:  cicciod=88  (my password and d=88) ?

Thanks

need write:
yourpass d=88

Yes, you need to leave a gap between each command

Thanks I will give it a go

[ismurdegus]

try d=88

My hero.  I had assumed that since the pools said they auto-adjusted the difficulty, I wouldn't need to set it manually, but this setting worked.  Thanks!

I have the same issue with my X10

Where I suppose insert the d=88  ?

Thanks

into password

Hi
Sorry but I am little bit confuse.....

I am mining on xvg-mg.suprnova and the password is the worker password.

Is this will work on xvg-mg.suprnova? If YES, inside the password space I need wrote:  cicciod=88  (my password and d=88) ?

Thanks

need write:
yourpass d=88

Yes, you need to leave a gap between each command

No is not working for me.
I am still having up and down in hash power on the pool. From 7000KH/s to 12000KH/s .

[acyclovir]

Hello
Is there a way to build the Baikal X10 and B into the Awesome Miner for Profitswith?
Is there any guidance for this or is there something on Youtube.
I would be very happy about a link.

I have good experience with AM (AntMiners, RIGS, Baikal, X10) But english is not my native language, i am spanish speaker, my english is poor, i have helped some people with the configuration of AM, via TeamViewer, I could help you if you want, obviously all by your sight, each TeamViewer movement, or configuration, you could be able to verify in real time, however... I recommend a threshold of 20 and for profit switching time not less than 30 min an max 3 pools for profit

[JohnSch]

What coin are you guys currently mining? I am currently mining Qubit-Digibyte at $38 a day. 

[Kilomans]

Damn thing went off-line 2 times in the past 48 hours which is really bad because it always does it when I'm not around, or asleep.

Another 7 hours off-line without warning.  I don't think I need to tell anyone here how much $ that is... or how I can't get the opportunity back.

Leave the miner's side at your own risk! This thing needs a babysitter.

[JohnSch]

Damn thing went off-line 2 times in the past 48 hours which is really bad because it always does it when I'm not around, or asleep.

Another 7 hours off-line without warning.  I don't think I need to tell anyone here how much $ that is... or how I can't get the opportunity back.

Leave the miner's side at your own risk! This thing needs a babysitter.

this happens to me too, you could use a smart plug to restart the miner remotely when you are not home.

https://www.amazon.com/TP-Link-Required-Control-Anywhere-HS100/dp/B0178IC734/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=gpuz-20&linkId=3f499bc540253d7e11cadb15f1901f72

[Shorty2520]

Damn thing went off-line 2 times in the past 48 hours which is really bad because it always does it when I'm not around, or asleep.

Another 7 hours off-line without warning.  I don't think I need to tell anyone here how much $ that is... or how I can't get the opportunity back.

Leave the miner's side at your own risk! This thing needs a babysitter.

Set email notification on the mining pool you use and buy wlan sockets.

Some here make a reset every night, but in my opinion that is to much. Most of the devices run 1-2 weeks before a failure comes up.
I restart them manually with wlan sockets.

[aerodynomic]

Damn thing went off-line 2 times in the past 48 hours which is really bad because it always does it when I'm not around, or asleep.

Another 7 hours off-line without warning.  I don't think I need to tell anyone here how much $ that is... or how I can't get the opportunity back.

Leave the miner's side at your own risk! This thing needs a babysitter.

this happens to me too, you could use a smart plug to restart the miner remotely when you are not home.

https://www.amazon.com/TP-Link-Required-Control-Anywhere-HS100/dp/B0178IC734/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=gpuz-20&linkId=3f499bc540253d7e11cadb15f1901f72

I've literally never had mine ever cut off in its entire lifetime. How hot are they running?

[Shorty2520]

Mine are running between 18-21 degrees celsius, pi board should be around 32-34.