TDartDDD
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2018, 09:45:56 PM |
|
Great work with the miner! I've noticed the rejected shares go down drastically to about 1.2% on my machine anyways. Pool side the hash rate looks sporadic, so its really hard to tell which miner averages a better over all rate. I've got my 1070ti at about 550 sols/s and my 980 at about 330. Compared to other miners I notice about 15-20 sols/s more between both cards, i'm enjoying it!
|
|
|
|
cryptoyes
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 297
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2018, 09:58:10 PM |
|
Note that I connected to Nicehash via miningrigrentals, not directly. That's where I get a lot of those rejected shares and errors. Setup a rig on miningrigrentals, add nicehash as pool to it, then connect bminer to miningrigrentals. The number of rejected shares shouldn't be different but bminer seems to get confused when nicehash changes nonces
|
|
|
|
simpie10
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2018, 10:03:00 PM |
|
Goodminer so far. For the people who are trying to add -logfile to version 5.2 Add this: -logfile log.txt ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
realbminer (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2018, 10:13:00 PM |
|
Just tried again for fun -- still doesn't start for me on Windows 10. Not from batch file, nor on its own with any command arguments.
And that's with two different Windows 10 machines, one AMD Ryzen 7 1700, one intel i7 3770. Both with a GTX 1070.
Any way to debug this? I don't have anything strange running at the same time, as far as I can tell.
Just to confirm -- did you turn off windows defender? Windows Defender sometimes would deny the execution. What happens if you directly click on bminer.exe? Yes, I had tried disabling Windows Defender, despite it showing no indication that it cared about bminer.exe. Disabling Windows Defender had no effect. If I double-click bminer.exe a cmd-style window appears for a couple seconds, then closes. It has no contents. There are no error messages or other outputs. EDIT: same result with new 5.2.0 version. Try installing Visual Basic libraries, .NET Framework libraries, and latest CUDA SDK. 99% it will fix this for you I do some very basic, minimal compiling on these machines, such as compiling xmrig & xmr-stak. So I have the CUDA SDK, and some .NET/VB libraries. Can you suggest specifics on which ones I might be missing? What are the outputs if you are running the executable directly?
|
When Crypto-mining Made Fast. @realbminer on TWTR
|
|
|
realbminer (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2018, 10:15:22 PM |
|
bminer might report faster in the miner but on nanopool im seeing less than ewbf first half of this is 1060 3gb on ewbf 2nd is with bminer ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fpreview.ibb.co%2FjhpwpG%2FCapture.png&t=665&c=F2HHgWPZOalhtg) What commands did you use for tests? What are the clocks and memory settings? One common mistake is to disable devfee. As described in the documentation, disabling devfees will disable some of the optimizations which that results less hashrates on the pool side.
|
When Crypto-mining Made Fast. @realbminer on TWTR
|
|
|
el_4_jinete
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 12:28:15 AM |
|
Hi, This doesn't work on my rig. I'm using DSTM for two months and no issues. rig2:~/bminer$ ./bminer -uri $SCHEME://$USERNAME@$POOL [INFO] [2018-01-23T19:14:56-05:00] Bminer: When Crypto-mining Made Fast (v5.2.0-4f20af3) [INFO] [2018-01-23T19:14:56-05:00] Starting miner on devices [0 1 2 3 4] [INFO] [2018-01-23T19:14:56-05:00] Connected to us1-zcash.flypool.org:3333 [INFO] [2018-01-23T19:14:56-05:00] Subscribed to stratum server [INFO] [2018-01-23T19:14:56-05:00] Set nonce to 108ddde5b3 [INFO] [2018-01-23T19:14:56-05:00] Authorized [INFO] [2018-01-23T19:14:56-05:00] Set target to 6abc74931804560e2db29defa7c64b37894160e5d022dbf97e6abc7493180400 [INFO] [2018-01-23T19:14:56-05:00] Starting miner on device 0... [INFO] [2018-01-23T19:14:56-05:00] [D0] GPU check watchdog has started [INFO] [2018-01-23T19:14:57-05:00] Started miner on device 0 [INFO] [2018-01-23T19:14:57-05:00] Starting miner on device 1... [INFO] [2018-01-23T19:14:57-05:00] [D1] GPU check watchdog has started [INFO] [2018-01-23T19:14:57-05:00] Received new job 63d5ec62c08965e842d3 [INFO] [2018-01-23T19:14:57-05:00] Started miner on device 1 [INFO] [2018-01-23T19:14:58-05:00] Starting miner on device 2... [INFO] [2018-01-23T19:14:58-05:00] [D2] GPU check watchdog has started [INFO] [2018-01-23T19:14:59-05:00] Started miner on device 2 [INFO] [2018-01-23T19:14:59-05:00] Starting miner on device 3... [INFO] [2018-01-23T19:14:59-05:00] [D3] GPU check watchdog has started [INFO] [2018-01-23T19:15:00-05:00] Started miner on device 3 [INFO] [2018-01-23T19:15:01-05:00] Starting miner on device 4... [INFO] [2018-01-23T19:15:01-05:00] [D4] GPU check watchdog has started [INFO] [2018-01-23T19:15:02-05:00] Started miner on device 4 [WARN] [2018-01-23T19:15:02-05:00] Miner died! It will be restarted soon... The dmesg shows me this message: rig2:~# dmesg [99684.245823] traps: bminer[22778] trap invalid opcode ip:6f6a92 sp:7fa0b8ffe930 error:0 [99944.004193] traps: bminer[22900] trap invalid opcode ip:6f6a92 sp:7fc424dfe930 error:0 [99944.004389] traps: bminer[22880] trap invalid opcode ip:6f6a92 sp:7fc4f9110930 error:0 How to resolve this? Ubuntu 16.0.4 nvidia-387.26-0ubuntu1
|
|
|
|
realbminer (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 12:45:56 AM |
|
Hi, This doesn't work on my rig. I'm using DSTM for two months and no issues. rig2:~/bminer$ ./bminer -uri $SCHEME://$USERNAME@$POOL [INFO] [2018-01-23T19:14:56-05:00] Bminer: When Crypto-mining Made Fast (v5.2.0-4f20af3) [INFO] [2018-01-23T19:14:56-05:00] Starting miner on devices [0 1 2 3 4] [INFO] [2018-01-23T19:14:56-05:00] Connected to us1-zcash.flypool.org:3333 [INFO] [2018-01-23T19:14:56-05:00] Subscribed to stratum server [INFO] [2018-01-23T19:14:56-05:00] Set nonce to 108ddde5b3 [INFO] [2018-01-23T19:14:56-05:00] Authorized [INFO] [2018-01-23T19:14:56-05:00] Set target to 6abc74931804560e2db29defa7c64b37894160e5d022dbf97e6abc7493180400 [INFO] [2018-01-23T19:14:56-05:00] Starting miner on device 0... [INFO] [2018-01-23T19:14:56-05:00] [D0] GPU check watchdog has started [INFO] [2018-01-23T19:14:57-05:00] Started miner on device 0 [INFO] [2018-01-23T19:14:57-05:00] Starting miner on device 1... [INFO] [2018-01-23T19:14:57-05:00] [D1] GPU check watchdog has started [INFO] [2018-01-23T19:14:57-05:00] Received new job 63d5ec62c08965e842d3 [INFO] [2018-01-23T19:14:57-05:00] Started miner on device 1 [INFO] [2018-01-23T19:14:58-05:00] Starting miner on device 2... [INFO] [2018-01-23T19:14:58-05:00] [D2] GPU check watchdog has started [INFO] [2018-01-23T19:14:59-05:00] Started miner on device 2 [INFO] [2018-01-23T19:14:59-05:00] Starting miner on device 3... [INFO] [2018-01-23T19:14:59-05:00] [D3] GPU check watchdog has started [INFO] [2018-01-23T19:15:00-05:00] Started miner on device 3 [INFO] [2018-01-23T19:15:01-05:00] Starting miner on device 4... [INFO] [2018-01-23T19:15:01-05:00] [D4] GPU check watchdog has started [INFO] [2018-01-23T19:15:02-05:00] Started miner on device 4 [WARN] [2018-01-23T19:15:02-05:00] Miner died! It will be restarted soon... The dmesg shows me this message: rig2:~# dmesg [99684.245823] traps: bminer[22778] trap invalid opcode ip:6f6a92 sp:7fa0b8ffe930 error:0 [99944.004193] traps: bminer[22900] trap invalid opcode ip:6f6a92 sp:7fc424dfe930 error:0 [99944.004389] traps: bminer[22880] trap invalid opcode ip:6f6a92 sp:7fc4f9110930 error:0 How to resolve this? Ubuntu 16.0.4 nvidia-387.26-0ubuntu1 What CPU are you using?
|
When Crypto-mining Made Fast. @realbminer on TWTR
|
|
|
apiontek
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 12:58:54 AM |
|
Just tried again for fun -- still doesn't start for me on Windows 10. Not from batch file, nor on its own with any command arguments.
And that's with two different Windows 10 machines, one AMD Ryzen 7 1700, one intel i7 3770. Both with a GTX 1070.
Any way to debug this? I don't have anything strange running at the same time, as far as I can tell.
Just to confirm -- did you turn off windows defender? Windows Defender sometimes would deny the execution. What happens if you directly click on bminer.exe? Yes, I had tried disabling Windows Defender, despite it showing no indication that it cared about bminer.exe. Disabling Windows Defender had no effect. If I double-click bminer.exe a cmd-style window appears for a couple seconds, then closes. It has no contents. There are no error messages or other outputs. EDIT: same result with new 5.2.0 version. Try installing Visual Basic libraries, .NET Framework libraries, and latest CUDA SDK. 99% it will fix this for you I do some very basic, minimal compiling on these machines, such as compiling xmrig & xmr-stak. So I have the CUDA SDK, and some .NET/VB libraries. Can you suggest specifics on which ones I might be missing? What are the outputs if you are running the executable directly? No output. When I run bminer.exe in cmd window, it just pauses, then goes back to the prompt. When I double-click it, an empty console window briefly appears, then disappears.
|
|
|
|
salfter
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 01:02:06 AM |
|
Looks like after a few minutes, it's settling in around 1.68 kS/s on my rig:
* four 1070s: three MSI Gaming Xs and a PNY reference design * Gentoo Linux * mining at zpool
The MSI cards are power-limited to 115W and underclocked by 100 MHz. The PNY card is power-limited to 95W and running at stock speed. Total power consumption for the rig is 525W.
With the EWBF miner, I was seeing 1.52 kS/s. tpruvot's ccminer was running closer to 1.2, so even with a devfee, it looks like you're still coming out ahead.
|
|
|
|
anotherwave
Newbie
Offline
Activity: 39
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 01:05:19 AM |
|
I would strongly advise people to look at their mining pool hashrate for this miner and not the miners reported hashrate... Do the test... ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif)
|
|
|
|
akadamson
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 140
Merit: 18
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 01:59:54 AM |
|
I would strongly advise people to look at their mining pool hashrate for this miner and not the miners reported hashrate... Do the test... ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) I'm beginning to think the same thing but it's more than that, when you first run it you get really nice looking numbers, then after a couple of hours, what you say sets in. Here is the comparison of DSTM vs BMiner. First line is DSTM that had been running for a few days Next line is Bminer after 3 hours. I saw grossly deviating current hash as well. This was a GTX 950 that I just happened to have, but the two sets of number are on the same computer with the same hardware, etc. Current Hashrate Average Hashrate 0H/s 155.9H/s 80H/s 147.9H/s
As a final test, I'm going to leave it running in -nofee mode while I do some other work on a different miner
|
|
|
|
realbminer (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 02:36:37 AM |
|
I would strongly advise people to look at their mining pool hashrate for this miner and not the miners reported hashrate... Do the test... ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) I'm beginning to think the same thing but it's more than that, when you first run it you get really nice looking numbers, then after a couple of hours, what you say sets in. Here is the comparison of DSTM vs BMiner. First line is DSTM that had been running for a few days Next line is Bminer after 3 hours. I saw grossly deviating current hash as well. This was a GTX 950 that I just happened to have, but the two sets of number are on the same computer with the same hardware, etc. Current Hashrate Average Hashrate 0H/s 155.9H/s 80H/s 147.9H/s
As a final test, I'm going to leave it running in -nofee mode while I do some other work on a different miner Can you run your numbers again with devfee turned on? The miner will disable a number of optimizations if you disable devfee, resulting in slower hashrate.
|
When Crypto-mining Made Fast. @realbminer on TWTR
|
|
|
akadamson
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 140
Merit: 18
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 02:40:00 AM |
|
I would strongly advise people to look at their mining pool hashrate for this miner and not the miners reported hashrate... Do the test... ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) I'm beginning to think the same thing but it's more than that, when you first run it you get really nice looking numbers, then after a couple of hours, what you say sets in. Here is the comparison of DSTM vs BMiner. First line is DSTM that had been running for a few days Next line is Bminer after 3 hours. I saw grossly deviating current hash as well. This was a GTX 950 that I just happened to have, but the two sets of number are on the same computer with the same hardware, etc. Current Hashrate Average Hashrate 0H/s 155.9H/s 80H/s 147.9H/s
As a final test, I'm going to leave it running in -nofee mode while I do some other work on a different miner Can you run your numbers again with devfee turned on? The miner will disable a number of optimizations if you disable devfee. Maybe I mis spoke - those numbers above are *with devfee turned ON* and are what FlyPool is reporting, not the miner software. Probably the biggest problem is that the radically changing instant hash rate, I see it cycle up and down by huge margins like over 100h/s in this case and this is just a small GPU. I'm running in -nofee mode right now just to see what happens
|
|
|
|
realbminer (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 02:47:45 AM |
|
I would strongly advise people to look at their mining pool hashrate for this miner and not the miners reported hashrate... Do the test... ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) I'm beginning to think the same thing but it's more than that, when you first run it you get really nice looking numbers, then after a couple of hours, what you say sets in. Here is the comparison of DSTM vs BMiner. First line is DSTM that had been running for a few days Next line is Bminer after 3 hours. I saw grossly deviating current hash as well. This was a GTX 950 that I just happened to have, but the two sets of number are on the same computer with the same hardware, etc. Current Hashrate Average Hashrate 0H/s 155.9H/s 80H/s 147.9H/s
As a final test, I'm going to leave it running in -nofee mode while I do some other work on a different miner Can you run your numbers again with devfee turned on? The miner will disable a number of optimizations if you disable devfee. Maybe I mis spoke - those numbers above are *with devfee turned ON* and are what FlyPool is reporting, not the miner software. Probably the biggest problem is that the radically changing instant hash rate, I see it cycle up and down by huge margins like over 100h/s in this case and this is just a small GPU. I'm running in -nofee mode right now just to see what happens The mining pool is estimating your hashrate based on the number of shares that the miner has submitted. Given that you have only one GPU, it will take a while to stabilize. I would suggest running both miners for at least 24 hours to get the results.
|
When Crypto-mining Made Fast. @realbminer on TWTR
|
|
|
akadamson
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 140
Merit: 18
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 02:52:36 AM |
|
ok, will do that and report any adjustments. I've never had to do that with any other miner software so far... But it doesn't really matter, because this is just a test anyway Software reports hashrates are up from the other miner software that I've ran in comparison, but that really doesn't tell you anything, what counts is what the pools shows. ps. can you talk to awesomeminer.com to see if they can support your miner - please?? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
anotherwave
Newbie
Offline
Activity: 39
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 02:53:13 AM |
|
i tried it for 7hrs, with dev fee on. i'll give it another shot.. but i have to say after 7hrs this miner was close to 70mh/s off the reported average rate. i even swapped it to an identical card with the same settings to make sure it wasn't that card. i'll see tomorrow what it says..
|
|
|
|
GWBIV
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 04:03:20 AM |
|
Looks like a slight improvement on DTSM I tested using 3 1070's and 2 1070 ti's
DTSM 2474
Bminer 2530
|
|
|
|
kevdotcom
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 04:04:18 AM |
|
Any advantages regarding Hashrate between 5.2 and 5.1? Actually i am running my 1070 Ti witch 500-510s, at60% PL, +260 Core, +595 Mem with 105-109 Power Consumption.
My GTX 1060 jumped from 330 Sol/s to 340 Sol/s after updating... Definitely worth.
|
|
|
|
PIR3lly
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2018, 06:44:00 AM Last edit: January 24, 2018, 07:00:28 AM by PIR3lly |
|
Well, I've managed to solve my problem: Get error: The semaphore timeout period has expired, resseting in 5 seconds. Connection failed due to External host closed the connection" by updating to 5.2.0 Did some tests, compared to DSTM. Settings: 4x EVGA 1070Ti on 63%, core +200, mem +700 DSTM showed 2070 Sol/s. Average last 4h hashrate on Miningspeed 2060 Sol/sBminer 5.2.0, 2140 Sol/s. Average last 4h hashrate on Miningspeed 2130 Sol/s (0.2% rejected shares) Looks very promising till now. Thanks!
|
|
|
|
|
|