Hacking The KNC Firmware: Overclocking

[joeventura]

at 0.99.2 firmware does not have these one
how will can do overclocked??




is at the command prompt:

vi /etc/init.d/cgminer.sh

Use the cursor keys on your keyboard to scroll down till you see this code:

Look for the line that says:

cmd=$(printf "0x86,0x%02X,0x01,0xF1" $c)


NOTE: some of the characters at the end (especially the F1) may be different.

The key is the line with the 0x86, when you see that you are on the right line.


change this:

cmd=$(printf "0x86,0x%02X,0x01,0xF1" $c)

to this:


cmd=$(printf "0x86,0x%02X,0x02,0x11" $c)

The student becomes the teacher!

Well done!

[1713557931]

1713557931

[1713557931]

1713557931

[1713557931]

1713557931

[jelin1984]

No no
If see my post I have problem can help me to fix it

[Sonic_AFB]

with 201 i have 615-620 Gh/s, with 211 i have 586 Gh/s, and with high temperatures (76º) i have 597 Gh/s is that normal?

http://imageshack.com/a/img59/4863/mcpc.jpg
http://imageshack.com/a/img89/8384/5ry4.jpg

[jelin1984]

can anyone have overclocked easy like 0.99.1

0.99.2 version
 

[pedrosoft]

with 201 i have 615-620 Gh/s, with 211 i have 586 Gh/s, and with high temperatures (76º) i have 597 Gh/s is that normal?

You could put some fans inside the case !

[ncs0ne]

can anyone have overclocked easy like 0.99.1

0.99.2 version
 

New firmware's starter doesn't contain any 'spi-test' calls you could modify.
Try your old starter (with minor modifications for BFGminer). Works fine.
https://bitcointalk.org/index.php?topic=313978.msg4464759#msg4464759

[lenny_]

Hi,

I am using Oct Jupiter with 0.99.1-tune firmware. After I pressed "Reset factory settings" on Advanced tab, I can no longer access Advanced tab at all. Instead I have browser message with "Fetch advanced configuration/status failed." and "OK" button. Restarting, flashing to earlier firmware and flashing back to 0.99.1-tune does not resolved the issue. Jupiter itself is mining away nicely, but I can't access Advanced tab anymore.
Any one had similar problem?

Ctrl+F5?

Of course I tried it, doesn't work.

[sickpig]

Hi,

I am using Oct Jupiter with 0.99.1-tune firmware. After I pressed "Reset factory settings" on Advanced tab, I can no longer access Advanced tab at all. Instead I have browser message with "Fetch advanced configuration/status failed." and "OK" button. Restarting, flashing to earlier firmware and flashing back to 0.99.1-tune does not resolved the issue. Jupiter itself is mining away nicely, but I can't access Advanced tab anymore.
Any one had similar problem?

Ctrl+F5?

Of course I tried it, doesn't work.

did you try to clear the cache?
with another browser?
private browsing (Ctrl+Shift+n)?

[NilBit]

Hi,

I am using Oct Jupiter with 0.99.1-tune firmware. After I pressed "Reset factory settings" on Advanced tab, I can no longer access Advanced tab at all. Instead I have browser message with "Fetch advanced configuration/status failed." and "OK" button. Restarting, flashing to earlier firmware and flashing back to 0.99.1-tune does not resolved the issue. Jupiter itself is mining away nicely, but I can't access Advanced tab anymore.
Any one had similar problem?

Ctrl+F5?

Of course I tried it, doesn't work.

Try to run:

waas -d -o /config/advanced.conf

[crashoveride54902]

So is anyone trying 241 on a whole board yet for long period of time? i'm on 231 with 55a per vrm right now...tryed 241 but would have to up the volts even more as i had alotta cores go off...just wondering

[tiozes]

with 201 i have 615-620 Gh/s, with 211 i have 586 Gh/s, and with high temperatures (76º) i have 597 Gh/s is that normal?

because it gives less performance using 211? and 231 is getting worse, you have to play other parameters?

The temperature arrived at 70 ° C because the cooling stopped as it was very cold, but we have no temperature problems.

see if someone helps us get a little more power.

Is there any way to stop bermod without restart or shutdown the KNC?

regards

[giletto]

So actually is no way to OC a nov batch jupiter, right?

[elasticband]

Hi,

I am using Oct Jupiter with 0.99.1-tune firmware. After I pressed "Reset factory settings" on Advanced tab, I can no longer access Advanced tab at all. Instead I have browser message with "Fetch advanced configuration/status failed." and "OK" button. Restarting, flashing to earlier firmware and flashing back to 0.99.1-tune does not resolved the issue. Jupiter itself is mining away nicely, but I can't access Advanced tab anymore.
Any one had similar problem?

Ctrl+F5?

Of course I tried it, doesn't work.

new firmware gives an ption to lock access to a certain IP addy, is it possible you looked it?

[elasticband]

*Disclaimer* You and you alone are responsible for your actions and choosing to do what others are doing, do not hold others responsible if something goes wrong

if anyone needs help OC'ing october batch using new firmware send me a PM and i will get around to helping you tonight using team viewer.

use putty and login to your miners IP.

Login = root
password = miner password

type "screen -r" then hit "q" then type vi /etc/init.d/cgminer.sh , this will allow you to edit and delete.

 delete every line ("d" deletes line, "dd130" should delete every line(give it 20seconds.

then paste the bellow script provided by Ncs0ne, thanks dude! bellow code is set for 211, i run my Saturn 4vrm on 231

hit esc then type  ":"(exits editing mode) type "wq" then hit enter

then type  "/etc/init.d/cgminer.sh restart"

screen -r to reload.

Code:

#!/bin/sh

PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin

use_bfgminer=
if [ -f /config/miner.conf ]; then
        . /config/miner.conf  #if bfgminer is enabled, this file contains: use_bfgminer="true"
fi
if [ "$use_bfgminer" = true ] ; then
        DAEMON=/usr/bin/bfgminer
        NAME=bfgminer
        DESC="BFGMiner daemon"
        EXTRA_OPT="-S knc:auto"
else
	DAEMON=/usr/bin/cgminer
	NAME=cgminer
	DESC="Cgminer daemon"
	EXTRA_OPT=
fi


set -e

test -x "$DAEMON" || exit 0

do_start() {
	# Stop SPI poller
	spi_ena=0
	i2cset -y 2 0x71 2 $spi_ena

	good_ports=""
	bad_ports=""

	# CLear faults in megadlynx's
	for b in 3 4 5 6 7 8 ; do
		for d in 0 1 2 3 4 5 6 7 ; do
			i2cset -y $b 0x1$d 3 >/dev/null 2>&1 || true
		done
	done

	for p in 0 1 2 3 4 5 ; do
		i2cset -y 2 0x71 1 $((p+1))
		good_flag=0
		ar="$(spi-test -s 50000 -OHC -D /dev/spidev1.0 0x80,3,0,0,0,0,0,0 | tail -c 13)"
                if [ "x$ar" = "x00 30 A0 01" ] ; then
			good_flag=1
		fi
		ar="$(spi-test -s 50000 -OHC -D /dev/spidev1.0 0x80,2,0,0,0,0,0,0 | tail -c 13)"
                if [ "x$ar" = "x00 30 A0 01" ] ; then
			good_flag=1
		fi
		ar="$(spi-test -s 50000 -OHC -D /dev/spidev1.0 0x80,1,0,0,0,0,0,0 | tail -c 13)"
                if [ "x$ar" = "x00 30 A0 01" ] ; then
			good_flag=1
		fi
		ar="$(spi-test -s 50000 -OHC -D /dev/spidev1.0 0x80,0,0,0,0,0,0,0 | tail -c 13)"
                if [ "x$ar" = "x00 30 A0 01" ] ; then
			good_flag=1
		fi

		if [ "$good_flag" = "1" ] ; then
			good_ports=$good_ports" $p"
		else
			bad_ports=$bad_ports" $p"
		fi
	done

	if [ -n "$good_ports" ] ; then
		for p in $good_ports ; do
			# Re-enable PLL
			i2cset -y 2 0x71 1 $((p+1))
			for c in 0 1 2 3 ; do
				cmd=$(printf "0x84,0x%02X,0,0" $c)
				spi-test -s 50000 -OHC -D /dev/spidev1.0 $cmd >/dev/null
				cmd=$(printf "0x86,0x%02X,0x02,0x11" $c)
				spi-test -s 50000 -OHC -D /dev/spidev1.0 $cmd >/dev/null
				cmd=$(printf "0x85,0x%02X,0,0" $c)
				spi-test -s 50000 -OHC -D /dev/spidev1.0 $cmd >/dev/null
			done
			
			# re-enable all cores
			i=0
			while [[ $i -lt 192 ]] ; do
				i2cset -y 2 0x2$p $i 1
				i=$((i+1))
			done
			spi_ena=$(( spi_ena | (1 << $p) ))
		done
	fi
	if [ -n "$bad_ports" ] ; then
		for p in $bad_ports ; do
			# Disable PLL
			i2cset -y 2 0x71 1 $((p+1))
			for c in 0 1 2 3 ; do
				cmd=$(printf "0x84,0x%02X,0,0" $c)
				spi-test -s 50000 -OHC -D /dev/spidev1.0 $cmd >/dev/null
			done
			
			# disable all cores
			i=0
			while [[ $i -lt 192 ]] ; do
				i2cset -y 2 0x2$p $i 0
				i=$((i+1))
			done
			spi_ena=$(( spi_ena & ~(1 << $p) ))
		done
	fi

	# Disable direct SPI
	i2cset -y 2 0x71 1 0

	# Enable SPI poller
	i2cset -y 2 0x71 2 $spi_ena

	start-stop-daemon -b -S -x screen -- -S cgminer -t cgminer -m -d "$DAEMON" --api-listen -c /config/cgminer.conf $EXTRA_OPT
}

do_stop() {
        killall -9 bfgminer cgminer 2>/dev/null || true
}
case "$1" in
  start)
        echo -n "Starting $DESC: "
	do_start
        echo "$NAME."
        ;;
  stop)
        echo -n "Stopping $DESC: "
	do_stop
        echo "$NAME."
        ;;
  restart|force-reload)
        echo -n "Restarting $DESC: "
        do_stop
        do_start
        echo "$NAME."
        ;;
  *)
        N=/etc/init.d/$NAME
        echo "Usage: $N {start|stop|restart|force-reload}" >&2
        exit 1
        ;;
esac

exit 0

[frankenmint]

if anyone needs help OC'ing october batch using new firmware send me a PM and i will get around to helping you tonight using team viewer

load vi. delete every line ("d" deletes line, "dd130" should delte every line.

then paste the bellow script provided by Ncs0ne, thanks dude! bellow code is set for 211, i run my Saturn 4vrm on 231

hit esc : wq then /etc/init.d/cgminer.sh restart

Code:

#!/bin/sh

PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin

use_bfgminer=
if [ -f /config/miner.conf ]; then
        . /config/miner.conf  #if bfgminer is enabled, this file contains: use_bfgminer="true"
fi
if [ "$use_bfgminer" = true ] ; then
        DAEMON=/usr/bin/bfgminer
        NAME=bfgminer
        DESC="BFGMiner daemon"
        EXTRA_OPT="-S knc:auto"
else
	DAEMON=/usr/bin/cgminer
	NAME=cgminer
	DESC="Cgminer daemon"
	EXTRA_OPT=
fi


set -e

test -x "$DAEMON" || exit 0

do_start() {
	# Stop SPI poller
	spi_ena=0
	i2cset -y 2 0x71 2 $spi_ena

	good_ports=""
	bad_ports=""

	# CLear faults in megadlynx's
	for b in 3 4 5 6 7 8 ; do
		for d in 0 1 2 3 4 5 6 7 ; do
			i2cset -y $b 0x1$d 3 >/dev/null 2>&1 || true
		done
	done

	for p in 0 1 2 3 4 5 ; do
		i2cset -y 2 0x71 1 $((p+1))
		good_flag=0
		ar="$(spi-test -s 50000 -OHC -D /dev/spidev1.0 0x80,3,0,0,0,0,0,0 | tail -c 13)"
                if [ "x$ar" = "x00 30 A0 01" ] ; then
			good_flag=1
		fi
		ar="$(spi-test -s 50000 -OHC -D /dev/spidev1.0 0x80,2,0,0,0,0,0,0 | tail -c 13)"
                if [ "x$ar" = "x00 30 A0 01" ] ; then
			good_flag=1
		fi
		ar="$(spi-test -s 50000 -OHC -D /dev/spidev1.0 0x80,1,0,0,0,0,0,0 | tail -c 13)"
                if [ "x$ar" = "x00 30 A0 01" ] ; then
			good_flag=1
		fi
		ar="$(spi-test -s 50000 -OHC -D /dev/spidev1.0 0x80,0,0,0,0,0,0,0 | tail -c 13)"
                if [ "x$ar" = "x00 30 A0 01" ] ; then
			good_flag=1
		fi

		if [ "$good_flag" = "1" ] ; then
			good_ports=$good_ports" $p"
		else
			bad_ports=$bad_ports" $p"
		fi
	done

	if [ -n "$good_ports" ] ; then
		for p in $good_ports ; do
			# Re-enable PLL
			i2cset -y 2 0x71 1 $((p+1))
			for c in 0 1 2 3 ; do
				cmd=$(printf "0x84,0x%02X,0,0" $c)
				spi-test -s 50000 -OHC -D /dev/spidev1.0 $cmd >/dev/null
				cmd=$(printf "0x86,0x%02X,0x02,0x11" $c)
				spi-test -s 50000 -OHC -D /dev/spidev1.0 $cmd >/dev/null
				cmd=$(printf "0x85,0x%02X,0,0" $c)
				spi-test -s 50000 -OHC -D /dev/spidev1.0 $cmd >/dev/null
			done
			
			# re-enable all cores
			i=0
			while [[ $i -lt 192 ]] ; do
				i2cset -y 2 0x2$p $i 1
				i=$((i+1))
			done
			spi_ena=$(( spi_ena | (1 << $p) ))
		done
	fi
	if [ -n "$bad_ports" ] ; then
		for p in $bad_ports ; do
			# Disable PLL
			i2cset -y 2 0x71 1 $((p+1))
			for c in 0 1 2 3 ; do
				cmd=$(printf "0x84,0x%02X,0,0" $c)
				spi-test -s 50000 -OHC -D /dev/spidev1.0 $cmd >/dev/null
			done
			
			# disable all cores
			i=0
			while [[ $i -lt 192 ]] ; do
				i2cset -y 2 0x2$p $i 0
				i=$((i+1))
			done
			spi_ena=$(( spi_ena & ~(1 << $p) ))
		done
	fi

	# Disable direct SPI
	i2cset -y 2 0x71 1 0

	# Enable SPI poller
	i2cset -y 2 0x71 2 $spi_ena

	start-stop-daemon -b -S -x screen -- -S cgminer -t cgminer -m -d "$DAEMON" --api-listen -c /config/cgminer.conf $EXTRA_OPT
}

do_stop() {
        killall -9 bfgminer cgminer 2>/dev/null || true
}
case "$1" in
  start)
        echo -n "Starting $DESC: "
	do_start
        echo "$NAME."
        ;;
  stop)
        echo -n "Stopping $DESC: "
	do_stop
        echo "$NAME."
        ;;
  restart|force-reload)
        echo -n "Restarting $DESC: "
        do_stop
        do_start
        echo "$NAME."
        ;;
  *)
        N=/etc/init.d/$NAME
        echo "Usage: $N {start|stop|restart|force-reload}" >&2
        exit 1
        ;;
esac

exit 0

For clarification to others, I had to type " escape, wq and also the colon  [:] for it to work.  I'm so used to using colons to start a series that I didn't realize you meant to type this in as well.  I only had to press right click for it to paste over his scrypt.  Could you please explain what you modified to this over the original version?  I would open it up in a power-txt editor and run doc-diff to see for myself but I'm just not up for doing all that now since i've already updated to yours.  

[elasticband]

if anyone needs help OC'ing october batch using new firmware send me a PM and i will get around to helping you tonight using team viewer.

use putty and login to your miners IP.

Login = root
password = miner password

type "screen -r" then hit "q" then type vi /etc/init.d/cgminer.sh , this will allow you to edit and delete.

 delete every line ("d" deletes line, "dd130" should delete every line(give it 20seconds.

then paste the bellow script provided by Ncs0ne, thanks dude! bellow code is set for 211, i run my Saturn 4vrm on 231

hit esc then type  ":"(exits editing mode) type "wq" then hit enter

then type  "/etc/init.d/cgminer.sh restart"

screen -r to reload.

For clarification to others, I had to type " escape, wq and also the colon  [:] for it to work.  I'm so used to using colons to start a series that I didn't realize you meant to type this in as well.  I only had to press right click for it to paste over his scrypt.  Could you please explain what you modified to this over the original version?  I would open it up in a power-txt editor and run doc-diff to see for myself but I'm just not up for doing all that now since i've already updated to yours.  

I didn't edit anything, i got it from another member. I think he over wrote his config so the spi changes are permanent t, that meant the changes were still there when he uploaded new firmware. bellow is what was missing in the new firmware.

Code:

# Re-enable PLL
			i2cset -y 2 0x71 1 $((p+1))
			for c in 0 1 2 3 ; do
				cmd=$(printf "0x84,0x%02X,0,0" $c)
				spi-test -s 50000 -OHC -D /dev/spidev1.0 $cmd >/dev/null
				cmd=$(printf "0x86,0x%02X,0x02,0x11" $c)
				spi-test -s 50000 -OHC -D /dev/spidev1.0 $cmd >/dev/null
				cmd=$(printf "0x85,0x%02X,0,0" $c)
				spi-test -s 50000 -OHC -D /dev/spidev1.0 $cmd >/dev/null
			done

[Shameless Beggar]

Why? Why was I such a pussy and didn't do overclocking described in this thread earlier?

[DPoS]

Why? Why was I such a pussy and didn't do overclocking described in this thread earlier?

didn't want to ruin the holidays if you nuked your miner?   well that was my reason to wait   

[pedrosoft]

Why? Why was I such a pussy and didn't do overclocking described in this thread earlier?

didn't want to ruin the holidays if you nuked your miner?   well that was my reason to wait   

ahhahaha 

[lenny_]

Hi,

I am using Oct Jupiter with 0.99.1-tune firmware. After I pressed "Reset factory settings" on Advanced tab, I can no longer access Advanced tab at all. Instead I have browser message with "Fetch advanced configuration/status failed." and "OK" button. Restarting, flashing to earlier firmware and flashing back to 0.99.1-tune does not resolved the issue. Jupiter itself is mining away nicely, but I can't access Advanced tab anymore.
Any one had similar problem?

Ctrl+F5?

Of course I tried it, doesn't work.

Try to run:

waas -d -o /config/advanced.conf

Thanks!

It turned out, that this file was completely empty.