Hacking The KNC Firmware: Overclocking

[crashoveride54902]

tryed pad new fw...getting the same gh/s as i was before...but it's nice not having to ssh into it and reset the clocks n vrm all the time thxs pad for your hard work

Thanks for the note..

I sent it to maybe 10 folks as a favor to them and I have seen no less then three of them trying to sell it on ebay, direct, or otherwise.. It's a sad look at how a number of people in the community try and exploit someone else's work..

There is a small minority of stand up guys but they are definitely a minority..

just had to power down units, hmm still had to ssh back into it to run vrm.sh so great if ya don't have to shut'em off

[sillywhim]

tryed pad new fw...getting the same gh/s as i was before...but it's nice not having to ssh into it and reset the clocks n vrm all the time thxs pad for your hard work

Thanks for the note..

I sent it to maybe 10 folks as a favor to them and I have seen no less then three of them trying to sell it on ebay, direct, or otherwise.. It's a sad look at how a number of people in the community try and exploit someone else's work..

There is a small minority of stand up guys but they are definitely a minority..

I never shared mines I got from you for 0.25 BTC to anyone! Makes me sad though to see it posted here for free.

...just sayin'

[Powell]

Yeah fucked up to whoever had it posted on Ebay.  And to the guy who posted it wanting tips that is fucking bs... 

I sent .3BTC before he even sent the software.  He deserves every bit of it and I had no problem giving him BTC for it.

[padrino]

Half that sent BTC spoke up, thanks again for doing it guys as it was a huge help and I'm glad you received it weeks ago..

Given how it has started to make the rounds, and is already spawning some slime balls to come out of the woodwork I will be moving to post it soon, if anything to keep the shit versions from coming out, and those that are attempting to insert backdoors (yes I found one effort in my email from someone passing it along)..

In any case thanks to J-J from the KNC forums we are close after one false start..

Donations welcome as always since it was time and money to get it where it is, and also add some of the new things I am working on now..

Thanks to all of the bitcointalk users that asked i send it with a donation afterward, aside from a small group that spoke up already it's been a sad showing... The KNC forum users have been better overall..

[Searing]

Half that sent BTC spoke up, thanks again for doing it guys as it was a huge help and I'm glad you received it weeks ago..

Given how it has started to make the rounds, and is already spawning some slime balls to come out of the woodwork I will be moving to post it soon, if anything to keep the shit versions from coming out, and those that are attempting to insert backdoors (yes I found one effort in my email from someone passing it along)..

In any case thanks to J-J from the KNC forums we are close after one false start..

Donations welcome as always since it was time and money to get it where it is, and also add some of the new things I am working on now..

Thanks to all of the bitcointalk users that asked i send it with a donation afterward, aside from a small group that spoke up already it's been a sad showing... The KNC forum users have been better overall..

where is the legit version and/or where do i send a donation? (trying to be legal here even if I'm still chik*sh*t to actually put it on the miner till maybe this weekend


er I also did PM you a couple days about this as well ...

thanks for your efforts

Searing

[taurus01]

Hello,

i am new here. 

Please help me, i have 2 Jupiter with firmeware 1.01 (the backend says 1.00) and the miner are november-batch. My problem is that i can´t switch to a higher MHZ as 775. There is no bigger/higher number i can choose.

[elasticband]

clear your browser cashe

[taurus01]

clear your browser cashe

Good idea! But dosent work. I testet it with Google Chrome, Firefox and Internetexplorer too.



Other ideas?

I listen about a new firmware, calls 1.01.1 - maybe i need that? Can somebody give it to me?

[crashoveride54902]

clear your browser cashe

Good idea! But dosent work. I testet it with Google Chrome, Firefox and Internetexplorer too.



Other ideas?

I listen about a new firmware, calls 1.01.1 - maybe i need that? Can somebody give it to me?

did you hit ctrl+r? you sure you installed 1.01?

[daddyfatsax]

So I have a 6 module Nov. Jupiter with padrino 1.01. I have absolutely no clue what these clock settings mean and this rig has been 100% stable at 1.45 TH/s and 1400W. The only thing I have done is change the volts on some dies. SPI voltage is 1.95 and locked. SPI freq is 201442 hz. What can I do to push a little bit more out of this unit?

[padrino]

So I have a 6 module Nov. Jupiter with padrino 1.01. I have absolutely no clue what these clock settings mean and this rig has been 100% stable at 1.45 TH/s and 1400W. The only thing I have done is change the volts on some dies. SPI voltage is 1.95 and locked. SPI freq is 201442 hz. What can I do to push a little bit more out of this unit?

Just keep bumping up the clock speed, 0x361 is workable on a number of the November units and will get you a good bump over what you have now..

[daddyfatsax]

So I have a 6 module Nov. Jupiter with padrino 1.01. I have absolutely no clue what these clock settings mean and this rig has been 100% stable at 1.45 TH/s and 1400W. The only thing I have done is change the volts on some dies. SPI voltage is 1.95 and locked. SPI freq is 201442 hz. What can I do to push a little bit more out of this unit?

Just keep bumping up the clock speed, 0x361 is workable on a number of the November units and will get you a good bump over what you have now..

Awesome. I will give it a shot. Did not want to screw anything up by just blindly changing clocks.

[GaryL]

This post is very interesting, I will continue to pay attention to you!

[daddyfatsax]

Bumped my clocks up some and now I am getting 1.5 TH/s at 1450W. HW errors are .002% and all the temps look good. Thanks padrino!

[Searing]

So I have a 6 module Nov. Jupiter with padrino 1.01. I have absolutely no clue what these clock settings mean and this rig has been 100% stable at 1.45 TH/s and 1400W. The only thing I have done is change the volts on some dies. SPI voltage is 1.95 and locked. SPI freq is 201442 hz. What can I do to push a little bit more out of this unit?

Just keep bumping up the clock speed, 0x361 is workable on a number of the November units and will get you a good bump over what you have now..

still have no access to get a "legit" version of this file would prefer the 'author" point me in the right direction rather then
the possible scammers mentioned on here that downloaded other files....Thanks!

Searing

[taurus01]

clear your browser cashe

Good idea! But dosent work. I testet it with Google Chrome, Firefox and Internetexplorer too.



Other ideas?

I listen about a new firmware, calls 1.01.1 - maybe i need that? Can somebody give it to me?

did you hit ctrl+r? you sure you installed 1.01?

Yes i had the 1.01 firmeware. Now i installed 1.01.1-padrino and it works.

If i push ctrl+r i can see this:

a) But what means it?
b) I cant choose more than 0x295 Mhz - what means 0x335 = 940Gh´s - because i cant see more than 0x295 Mhz
c) How mutch Volt is okay vor the dies before they will damage?

http://s14.directupload.net/images/140521/xgncvq57.jpg

?

[daddyfatsax]

So I put my Kill-A-Watt meter on 1 of my 2 EVGA 1000W PSU's. The meter is reading 1050W, but the web gui only shows that the rig is using 1450W. Why is that PSU maxed out?

[DPoS]

So I put my Kill-A-Watt meter on 1 of my 2 EVGA 1000W PSU's. The meter is reading 1050W, but the web gui only shows that the rig is using 1450W. Why is that PSU maxed out?

is that the PSU that is also powering the control board?  those watt reading you see are only for the chip not everything else like fans, control board and the psu itself

[daddyfatsax]

So I put my Kill-A-Watt meter on 1 of my 2 EVGA 1000W PSU's. The meter is reading 1050W, but the web gui only shows that the rig is using 1450W. Why is that PSU maxed out?

is that the PSU that is also powering the control board?  those watt reading you see are only for the chip not everything else like fans, control board and the psu itself

No that PSU is powering 3 of the 6 modules. Other PSU is powering the other 3 and the control board.

[Biffa]

clear your browser cashe

Good idea! But dosent work. I testet it with Google Chrome, Firefox and Internetexplorer too.



Other ideas?

I listen about a new firmware, calls 1.01.1 - maybe i need that? Can somebody give it to me?

did you hit ctrl+r? you sure you installed 1.01?

Yes i had the 1.01 firmeware. Now i installed 1.01.1-padrino and it works.

If i push ctrl+r i can see this:

a) But what means it?
b) I cant choose more than 0x295 Mhz - what means 0x335 = 940Gh´s - because i cant see more than 0x295 Mhz
c) How mutch Volt is okay vor the dies before they will damage?



?

Means you have a October Jupiter