[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner

[chek2fire]

Did anyone know a fix for the wifi hang up? I have my miner in wifi mode but after one or two days the wifi hangup and antminer stop hashing with a beep sound. If i connect it to the ethernet  it starts again to hashing.
The other problem that i have is that i cant see the interface of antminer through wifi. If i write the adress 192.168.1.99 to broswer when the machine is in wifi mode and the ethernet is unplugged it seems that antminer dont let me access it.

[zamot]

WiFi has its own IP. you should connect to this IP, but if it hang, than you can not access it anyway.
The safest way is to use LAN not WiFi.

[allcoinminer]

Did anyone know a fix for the wifi hang up? I have my miner in wifi mode but after one or two days the wifi hangup and antminer stop hashing with a beep sound. If i connect it to the ethernet  it starts again to hashing.
The other problem that i have is that i cant see the interface of antminer through wifi. If i write the adress 192.168.1.99 to broswer when the machine is in wifi mode and the ethernet is unplugged it seems that antminer dont let me access it.

Wifi is not at all recommended if you need consistency and are serious in making profits.

[S4VV4S]

WiFi has its own IP. you should connect to this IP, but if it hang, than you can not access it anyway.
The safest way is to use LAN not WiFi.

I have tried using LAN but couldn't get it to work.

How can I make my Ant mine with LAN only?

Thanks

[allcoinminer]

WiFi has its own IP. you should connect to this IP, but if it hang, than you can not access it anyway.
The safest way is to use LAN not WiFi.

I have tried using LAN but couldn't get it to work.

How can I make my Ant mine with LAN only?

Thanks

Whats happening when you connected the LAN?

[chek2fire]

WiFi has its own IP. you should connect to this IP, but if it hang, than you can not access it anyway.
The safest way is to use LAN not WiFi.

I have seen that wifi ip of antminer is 192.168.1.9 and with ethernet is 192.168.1.99.  . The problem is that i cant connect to this ip when antminer is in wifi mode . It seems to reload forever in broswer.
 

[norgan]

WiFi has its own IP. you should connect to this IP, but if it hang, than you can not access it anyway.
The safest way is to use LAN not WiFi.

I have seen that wifi ip of antminer is 192.168.1.9 and with ethernet is 192.168.1.99.  . The problem is that i cant connect to this ip when antminer is in wifi mode . It seems to reload forever in broswer.
 

I read that you can't have the wifi and wan IP in the same subnet.

[chek2fire]

WiFi has its own IP. you should connect to this IP, but if it hang, than you can not access it anyway.
The safest way is to use LAN not WiFi.

I have seen that wifi ip of antminer is 192.168.1.9 and with ethernet is 192.168.1.99.  . The problem is that i cant connect to this ip when antminer is in wifi mode . It seems to reload forever in broswer.
 

I read that you can't have the wifi and wan IP in the same subnet.

But it works perfect with both of them enable. Almost perfect with that wifi dc after 3-4 days.  If unplugged ethernet cable the antminer goes to wifi mod and cointinue hashing. But then i cant access the antminer gui through broswer even through ssh.

[chek2fire]

Can anyone see if he can access his antminer through wifi?

[S4VV4S]

WiFi has its own IP. you should connect to this IP, but if it hang, than you can not access it anyway.
The safest way is to use LAN not WiFi.

I have tried using LAN but couldn't get it to work.

How can I make my Ant mine with LAN only?

Thanks

Whats happening when you connected the LAN?

Well, I have the LAN cable connected but the Ants IP is on WAN (192.168.1.99), this is set by default.
When I disconnect the LAN cable I cannot access the miner.

There are no IP settings on LAN, just WAN and WiFi.

[R4v37]

oh god
someone pls help me
got 1failure from bitmain...
this S1 wont start hashing, and there's no status of the blades on the "status" tab
only
"This section contains no values yet"





this' the system log

Mon Dec  2 11:28:00 2013 daemon.info sysinit: Mon Dec  2 03:28:00 UTC 2013
Mon Dec  2 11:28:00 2013 user.emerg syslog: kmodloader: loading kernel modules from /etc/modules.d/**
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.790000] hidraw: raw HID events driver (C) Jiri Kosina
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.800000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.800000] Backport generated by backports.git backports-20130617-4-ge3220f5
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.820000] nf_conntrack version 0.5.0 (962 buckets, 3848 max)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.840000] usbcore: registered new interface driver usbhid
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.840000] usbhid: USB HID core driver
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.850000] usbcore: registered new interface driver usbserial
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.860000] usbcore: registered new interface driver usbserial_generic
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.870000] usbserial: USB Serial support registered for generic
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.900000] xt_time: kernel timezone is -0000
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.920000] cfg80211: Calling CRDA to update world regulatory domain
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.920000] cfg80211: World regulatory domain updated:
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.930000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.940000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.950000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.950000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.960000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.970000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.980000] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Dec  2 11:28:00 2013 kern.debug kernel: [   13.130000] ath: EEPROM regdomain: 0x0
Mon Dec  2 11:28:00 2013 kern.debug kernel: [   13.130000] ath: EEPROM indicates default country code should be used
Mon Dec  2 11:28:00 2013 kern.debug kernel: [   13.130000] ath: doing EEPROM country->regdmn map search
Mon Dec  2 11:28:00 2013 kern.debug kernel: [   13.130000] ath: country maps to regdmn code: 0x3a
Mon Dec  2 11:28:00 2013 kern.debug kernel: [   13.130000] ath: Country alpha2 being used: US
Mon Dec  2 11:28:00 2013 kern.debug kernel: [   13.130000] ath: Regpair used: 0x3a
Mon Dec  2 11:28:00 2013 kern.debug kernel: [   13.130000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.150000] cfg80211: Calling CRDA for country: US
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.150000] cfg80211: Regulatory domain changed to country: US
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.160000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.170000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.180000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.180000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.190000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.200000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.210000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.220000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Mon Dec  2 11:28:00 2013 user.info syslog: ran 16 iterations
Mon Dec  2 11:28:00 2013 daemon.info sysinit: kmod: ran 16 iterations
Mon Dec  2 11:28:04 2013 cron.info crond[563]: crond: crond (busybox 1.19.4) started, log level 5
Mon Dec  2 11:28:05 2013 daemon.notice netifd: Interface 'loopback' is now up
Mon Dec  2 11:28:05 2013 kern.info kernel: [   17.770000] device eth0 entered promiscuous mode
Mon Dec  2 11:28:05 2013 authpriv.info dropbear[574]: Not backgrounding
Mon Dec  2 11:28:05 2013 daemon.notice netifd: Interface 'wan' is now up
Mon Dec  2 11:28:05 2013 daemon.notice netifd: lan (610): udhcpc (v1.19.4) started
Mon Dec  2 11:28:06 2013 daemon.notice netifd: lan (610): Sending discover...
Mon Dec  2 11:28:06 2013 user.notice firewall: Reloading firewall due to ifup of wan (eth1)
Mon Dec  2 11:28:07 2013 kern.info kernel: [   20.210000] eth1: link up (100Mbps/Full duplex)
Mon Dec  2 11:28:07 2013 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Mon Dec  2 11:28:07 2013 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Mon Dec  2 11:28:08 2013 daemon.info sysinit: /etc/config/miner_pic.hex
Mon Dec  2 11:28:08 2013 daemon.info dnsmasq[682]: started, version 2.66 cachesize 150
Mon Dec  2 11:28:08 2013 daemon.info dnsmasq[682]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Mon Dec  2 11:28:08 2013 daemon.info dnsmasq[682]: using local addresses only for domain lan
Mon Dec  2 11:28:08 2013 daemon.info dnsmasq[682]: reading /tmp/resolv.conf.auto
Mon Dec  2 11:28:08 2013 daemon.info dnsmasq[682]: using nameserver 8.8.8.8#53
Mon Dec  2 11:28:08 2013 daemon.info dnsmasq[682]: using local addresses only for domain lan
Mon Dec  2 11:28:08 2013 daemon.info dnsmasq[682]: read /etc/hosts - 1 addresses
Mon Dec  2 11:28:08 2013 daemon.info sysinit: Unable to open /dev/bitmainbl0: No such file or directory
Mon Dec  2 11:28:08 2013 daemon.info sysinit: pic update
Mon Dec  2 11:28:08 2013 daemon.info sysinit: setting up led WAN
Mon Dec  2 11:28:08 2013 daemon.info sysinit: setting up led WANL
Mon Dec  2 11:28:08 2013 daemon.info sysinit: setting up led LAN1
Mon Dec  2 11:28:08 2013 daemon.info sysinit: setting up led LAN2
Mon Dec  2 11:28:08 2013 daemon.info sysinit: setting up led LAN3
Mon Dec  2 11:28:08 2013 daemon.info sysinit: setting up led LAN4
Mon Dec  2 11:28:08 2013 daemon.info sysinit: setting up led WLAN
Mon Dec  2 11:28:09 2013 daemon.notice netifd: lan (610): Sending discover...
Mon Dec  2 11:28:12 2013 daemon.notice netifd: lan (610): Sending discover...
Mon Dec  2 11:28:13 2013 daemon.info sysinit: ntpd: resolved peer 3.openwrt.pool.ntp.org to 222.165.224.164
Mon Dec  2 11:28:13 2013 daemon.info sysinit: ntpd: sent query to 222.165.224.164
Mon Dec  2 11:28:13 2013 daemon.info sysinit: ntpd: resolved peer 2.openwrt.pool.ntp.org to 114.141.48.158
Mon Dec  2 11:28:13 2013 daemon.info sysinit: ntpd: sent query to 114.141.48.158
Mon Dec  2 11:28:13 2013 daemon.info sysinit: ntpd: resolved peer 1.openwrt.pool.ntp.org to 203.34.118.4
Mon Dec  2 11:28:13 2013 daemon.info sysinit: ntpd: sent query to 203.34.118.4
Mon Dec  2 11:28:13 2013 daemon.info sysinit: ntpd: resolved peer 0.openwrt.pool.ntp.org to 113.52.148.37
Mon Dec  2 11:28:13 2013 daemon.info sysinit: ntpd: sent query to 113.52.148.37
Mon Dec  2 11:28:13 2013 daemon.info sysinit: ntpd: reply from 222.165.224.164: reach 0x01 offset 16625327.422985 delay 0.058349 status 0x24 strat 2 refid 0xc32b4a7b rootdelay 0.352651
Mon Dec  2 11:28:13 2013 daemon.info sysinit: ntpd: reply from 114.141.48.158: reach 0x01 offset 16625327.458237 delay 0.055254 status 0x24 strat 2 refid 0xc1bee642 rootdelay 0.344503
Mon Dec  2 11:28:13 2013 daemon.info sysinit: ntpd: reply from 203.34.118.4: reach 0x01 offset 16625327.435893 delay 0.052043 status 0x24 strat 3 refid 0xcaa2200c rootdelay 0.029191
Mon Dec  2 11:28:13 2013 daemon.info sysinit: ntpd: reply from 113.52.148.37: reach 0x01 offset 16625327.402100 delay 0.056804 status 0x24 strat 2 refid 0x85f3eea4 rootdelay 0.111788
Mon Dec  2 11:28:14 2013 daemon.info sysinit: ntpd: sent query to 222.165.224.164
Mon Dec  2 11:28:14 2013 daemon.info sysinit: ntpd: sent query to 114.141.48.158
Mon Dec  2 11:28:14 2013 daemon.info sysinit: ntpd: sent query to 113.52.148.37
Mon Dec  2 11:28:14 2013 daemon.info sysinit: ntpd: reply from 114.141.48.158: reach 0x03 offset 16625327.462902 delay 0.047888 status 0x24 strat 2 refid 0xc1bee642 rootdelay 0.344503
Mon Dec  2 11:28:14 2013 daemon.info sysinit: ntpd: reply from 222.165.224.164: reach 0x03 offset 16625327.423687 delay 0.055187 status 0x24 strat 2 refid 0xc32b4a7b rootdelay 0.352651
Mon Dec  2 11:28:14 2013 daemon.info sysinit: ntpd: reply from 113.52.148.37: reach 0x03 offset 16625327.404115 delay 0.056645 status 0x24 strat 2 refid 0x85f3eea4 rootdelay 0.111788
Mon Dec  2 11:28:15 2013 daemon.info sysinit: ntpd: sent query to 222.165.224.164
Mon Dec  2 11:28:15 2013 daemon.info sysinit: ntpd: sent query to 203.34.118.4
Mon Dec  2 11:28:15 2013 daemon.info sysinit: ntpd: reply from 203.34.118.4: reach 0x03 offset 16625327.438368 delay 0.049173 status 0x24 strat 3 refid 0xcaa2200c rootdelay 0.029191
Mon Dec  2 11:28:15 2013 daemon.info sysinit: ntpd: reply from 222.165.224.164: reach 0x07 offset 16625327.421173 delay 0.057279 status 0x24 strat 2 refid 0xc32b4a7b rootdelay 0.352651
Mon Dec  2 11:28:16 2013 daemon.info sysinit: ntpd: sent query to 114.141.48.158
Mon Dec  2 11:28:16 2013 daemon.info sysinit: ntpd: sent query to 113.52.148.37
Mon Dec  2 11:28:16 2013 daemon.info sysinit: ntpd: reply from 114.141.48.158: reach 0x07 offset 16625327.462379 delay 0.046627 status 0x24 strat 2 refid 0xc1bee642 rootdelay 0.344503
Mon Dec  2 11:28:16 2013 daemon.info sysinit: ntpd: reply from 113.52.148.37: reach 0x07 offset 16625327.403838 delay 0.057304 status 0x24 strat 2 refid 0x85f3eea4 rootdelay 0.111788
Mon Dec  2 11:28:17 2013 daemon.info sysinit: ntpd: sent query to 222.165.224.164
Mon Dec  2 11:28:17 2013 daemon.info sysinit: ntpd: sent query to 203.34.118.4
Mon Dec  2 11:28:17 2013 daemon.info sysinit: ntpd: reply from 203.34.118.4: reach 0x07 offset 16625327.438237 delay 0.049743 status 0x24 strat 3 refid 0xcaa2200c rootdelay 0.029191
Mon Dec  2 11:28:17 2013 daemon.info sysinit: ntpd: reply from 222.165.224.164: reach 0x0f offset 16625327.423275 delay 0.058127 status 0x24 strat 2 refid 0xc32b4a7b rootdelay 0.352651
Thu Jun 12 21:37:06 2014 daemon.info sysinit: ntpd: sent query to 222.165.224.164
Thu Jun 12 21:37:06 2014 daemon.info sysinit: ntpd: sent query to 114.141.48.158
Thu Jun 12 21:37:06 2014 daemon.info sysinit: ntpd: sent query to 203.34.118.4
Thu Jun 12 21:37:06 2014 daemon.info sysinit: ntpd: sent query to 113.52.148.37
Thu Jun 12 21:37:06 2014 daemon.info sysinit: ntpd: reply from 114.141.48.158: reach 0x0f offset 0.020501 delay 0.049595 status 0x24 strat 2 refid 0xc1bee642 rootdelay 0.344503
Thu Jun 12 21:37:06 2014 daemon.info sysinit: ntpd: reply from 203.34.118.4: reach 0x0f offset -0.003372 delay 0.052414 status 0x24 strat 3 refid 0xcaa2200c rootdelay 0.029191
Thu Jun 12 21:37:06 2014 daemon.info sysinit: ntpd: reply from 222.165.224.164: reach 0x1f offset -0.016309 delay 0.053835 status 0x24 strat 2 refid 0xc32b4a7b rootdelay 0.352651
Thu Jun 12 21:37:06 2014 daemon.info sysinit: ntpd: reply from 113.52.148.37: reach 0x0f offset -0.036352 delay 0.057950 status 0x24 strat 2 refid 0x85f3eea4 rootdelay 0.111788
Thu Jun 12 21:37:07 2014 daemon.info sysinit: ntpd: sent query to 114.141.48.158
Thu Jun 12 21:37:07 2014 daemon.info sysinit: ntpd: sent query to 203.34.118.4
Thu Jun 12 21:37:07 2014 daemon.info sysinit: ntpd: sent query to 113.52.148.37
Thu Jun 12 21:37:07 2014 daemon.info sysinit: ntpd: reply from 114.141.48.158: reach 0x1f offset 0.021178 delay 0.046874 status 0x24 strat 2 refid 0xc1bee642 rootdelay 0.344503
Thu Jun 12 21:37:07 2014 daemon.info sysinit: ntpd: reply from 203.34.118.4: reach 0x1f offset -0.002838 delay 0.049934 status 0x24 strat 3 refid 0xcaa2200c rootdelay 0.029191
Thu Jun 12 21:37:07 2014 daemon.info sysinit: ntpd: reply from 113.52.148.37: reach 0x1f offset -0.037782 delay 0.058681 status 0x24 strat 2 refid 0x85f3eea4 rootdelay 0.111788
Thu Jun 12 21:37:08 2014 daemon.info sysinit: ntpd: sent query to 222.165.224.164
Thu Jun 12 21:37:08 2014 daemon.info sysinit: ntpd: sent query to 203.34.118.4
Thu Jun 12 21:37:08 2014 daemon.info sysinit: ntpd: sent query to 113.52.148.37
Thu Jun 12 21:37:08 2014 daemon.info sysinit: ntpd: reply from 203.34.118.4: reach 0x3f offset -0.003355 delay 0.048886 status 0x24 strat 3 refid 0xcaa2200c rootdelay 0.029191
Thu Jun 12 21:37:08 2014 daemon.info sysinit: ntpd: reply from 222.165.224.164: reach 0x3f offset -0.016493 delay 0.053283 status 0x24 strat 2 refid 0xc32b4a7b rootdelay 0.352651
Thu Jun 12 21:37:08 2014 daemon.info sysinit: ntpd: reply from 113.52.148.37: reach 0x3f offset -0.036920 delay 0.057125 status 0x24 strat 2 refid 0x85f3eea4 rootdelay 0.111788
Thu Jun 12 21:37:09 2014 daemon.info sysinit: ntpd: sent query to 114.141.48.158
Thu Jun 12 21:37:09 2014 daemon.info sysinit: ntpd: sent query to 203.34.118.4
Thu Jun 12 21:37:09 2014 daemon.info sysinit: ntpd: sent query to 113.52.148.37
Thu Jun 12 21:37:09 2014 daemon.info sysinit: ntpd: reply from 114.141.48.158: reach 0x3f offset 0.021219 delay 0.046383 status 0x24 strat 2 refid 0xc1bee642 rootdelay 0.344503
Thu Jun 12 21:37:09 2014 daemon.info sysinit: ntpd: reply from 203.34.118.4: reach 0x7f offset -0.003165 delay 0.049133 status 0x24 strat 3 refid 0xcaa2200c rootdelay 0.029191
Thu Jun 12 21:37:09 2014 daemon.info sysinit: ntpd: reply from 113.52.148.37: reach 0x7f offset -0.036599 delay 0.057385 status 0x24 strat 2 refid 0x85f3eea4 rootdelay 0.111788
Thu Jun 12 21:37:10 2014 daemon.info sysinit: ntpd: sent query to 222.165.224.164
Thu Jun 12 21:37:10 2014 daemon.info sysinit: ntpd: sent query to 114.141.48.158
Thu Jun 12 21:37:10 2014 daemon.info sysinit: ntpd: sent query to 113.52.148.37
Thu Jun 12 21:37:10 2014 daemon.info sysinit: ntpd: reply from 114.141.48.158: reach 0x7f offset 0.022020 delay 0.048663 status 0x24 strat 2 refid 0xc1bee642 rootdelay 0.344503
Thu Jun 12 21:37:10 2014 daemon.info sysinit: ntpd: reply from 113.52.148.37: reach 0xff offset -0.036702 delay 0.057645 status 0x24 strat 2 refid 0x85f3eea4 rootdelay 0.111788
Thu Jun 12 21:37:10 2014 daemon.info sysinit: ntpd: reply from 222.165.224.164: reach 0x7f offset -0.030474 delay 0.080670 status 0x24 strat 2 refid 0xc32b4a7b rootdelay 0.352651
Thu Jun 12 21:37:11 2014 daemon.info sysinit: ntpd: sent query to 114.141.48.158
Thu Jun 12 21:37:11 2014 daemon.info sysinit: ntpd: sent query to 203.34.118.4
Thu Jun 12 21:37:11 2014 daemon.info sysinit: ntpd: reply from 114.141.48.158: reach 0xff offset 0.021352 delay 0.046745 status 0x24 strat 2 refid 0xc1bee642 rootdelay 0.344503
Thu Jun 12 21:37:11 2014 daemon.info sysinit: ntpd: reply from 203.34.118.4: reach 0xff offset -0.002787 delay 0.049822 status 0x24 strat 3 refid 0xcaa2200c rootdelay 0.029191
Thu Jun 12 21:37:12 2014 daemon.info sysinit: ntpd: sent query to 222.165.224.164
Thu Jun 12 21:37:12 2014 daemon.info sysinit: ntpd: sent query to 113.52.148.37
Thu Jun 12 21:37:12 2014 daemon.info sysinit: ntpd: reply from 222.165.224.164: reach 0xff offset -0.016660 delay 0.054204 status 0x24 strat 2 refid 0xc32b4a7b rootdelay 0.352651
Thu Jun 12 21:37:12 2014 daemon.info sysinit: ntpd: reply from 113.52.148.37: reach 0xff offset -0.038125 delay 0.058280 status 0x24 strat 2 refid 0x85f3eea4 rootdelay 0.111788
Thu Jun 12 21:37:13 2014 daemon.info sysinit: ntpd: sent query to 222.165.224.164
Thu Jun 12 21:37:13 2014 daemon.info sysinit: ntpd: sent query to 114.141.48.158
Thu Jun 12 21:37:13 2014 daemon.info sysinit: ntpd: sent query to 203.34.118.4
Thu Jun 12 21:37:13 2014 daemon.info sysinit: ntpd: sent query to 113.52.148.37
Thu Jun 12 21:37:13 2014 daemon.info sysinit: ntpd: reply from 114.141.48.158: reach 0xff offset 0.021576 delay 0.048311 status 0x24 strat 2 refid 0xc1bee642 rootdelay 0.344503
Thu Jun 12 21:37:13 2014 daemon.info sysinit: ntpd: reply from 203.34.118.4: reach 0xff offset -0.003082 delay 0.051125 status 0x24 strat 3 refid 0xcaa2200c rootdelay 0.029191
Thu Jun 12 21:37:13 2014 daemon.info sysinit: ntpd: reply from 222.165.224.164: reach 0xff offset -0.016817 delay 0.053352 status 0x24 strat 2 refid 0xc32b4a7b rootdelay 0.352651
Thu Jun 12 21:37:13 2014 daemon.info sysinit: ntpd: reply from 113.52.148.37: reach 0xff offset -0.036244 delay 0.057681 status 0x24 strat 2 refid 0x85f3eea4 rootdelay 0.111788
Thu Jun 12 21:37:14 2014 daemon.info sysinit: ntpd: sent query to 114.141.48.158
Thu Jun 12 21:37:14 2014 daemon.info sysinit: ntpd: sent query to 203.34.118.4
Thu Jun 12 21:37:14 2014 daemon.info sysinit: ntpd: sent query to 113.52.148.37
Thu Jun 12 21:37:14 2014 daemon.info sysinit: ntpd: reply from 114.141.48.158: reach 0xff offset 0.021328 delay 0.047581 status 0x24 strat 2 refid 0xc1bee642 rootdelay 0.344503
Thu Jun 12 21:37:14 2014 daemon.info sysinit: ntpd: reply from 203.34.118.4: reach 0xff offset -0.002898 delay 0.049346 status 0x24 strat 3 refid 0xcaa2200c rootdelay 0.029191
Thu Jun 12 21:37:14 2014 daemon.info sysinit: ntpd: reply from 113.52.148.37: reach 0xff offset -0.037556 delay 0.058863 status 0x24 strat 2 refid 0x85f3eea4 rootdelay 0.111788
Thu Jun 12 21:37:14 2014 daemon.info sysinit: --bitmain-options 115200:32:8:40:350:4d81 -o us1.ghash.io:3333 -O test3331:123 -o eu-stratum.btcguild.com:3333 -O test3331:123 --api-listen --api-network
Thu Jun 12 21:37:14 2014 daemon.info sysinit: - init complete -
Thu Jun 12 21:37:48 2014 cron.err crond[563]: time disparity of 277089 minutes detected
Thu Jun 12 21:39:01 2014 cron.info crond[563]: crond: USER root pid 831 cmd /usr/bin/cgminer-monitor

and this' the kernel log

[    0.000000] Linux version 3.10.12 (xxl@ubuntu) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38031) ) #2 Fri Feb 7 18:50:12 CST 2014
[    0.000000] MyLoader: sysp=1bec2fee, boardp=fdd6ef6f, parts=fc031564
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 803005b0, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc:

• 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=TL-WR741ND-v4 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 61336k/65536k available (2187k kernel code, 4200k reserved, 588k data, 232k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is TP-LINK TL-WR741ND v4
[    0.550000] bio: create slab <bio-0> at 0
[    0.560000] Switching to clocksource MIPS
[    0.560000] NET: Registered protocol family 2
[    0.570000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.570000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.570000] TCP: Hash tables configured (established 512 bind 512)
[    0.580000] TCP: reno registered
[    0.580000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.600000] NET: Registered protocol family 1
[    0.600000] PCI: CLS 0 bytes, default 32
[    0.620000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.620000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.630000] msgmni has been set to 119
[    0.630000] io scheduler noop registered
[    0.640000] io scheduler deadline registered (default)
[    0.640000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.650000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[    0.660000] console [ttyATH0] enabled, bootconsole disabled
[    0.670000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.680000] m25p80 spi0.0: found mx25l6405d, expected m25p80
[    0.680000] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[    0.690000] 5 tp-link partitions found on MTD device spi0.0
[    0.690000] Creating 5 MTD partitions on "spi0.0":
[    0.700000] 0x000000000000-0x000000020000 : "u-boot"
[    0.700000] 0x000000020000-0x000000117d84 : "kernel"
[    0.710000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.720000] 0x000000117d84-0x0000007f0000 : "rootfs"
[    0.720000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.740000] mtd: partition "rootfs" set to be root filesystem
[    0.740000] mtd: partition "rootfs_data" created automatically, ofs=0x370000, len=0x480000
[    0.750000] 0x000000370000-0x0000007f0000 : "rootfs_data"
[    0.760000] 0x000000020000-0x0000007f0000 : "firmware"
[    0.760000] 0x0000007f0000-0x000000800000 : "art"
[    0.790000] libphy: ag71xx_mdio: probed
[    0.790000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    1.340000] eth0: Found an AR7240/AR9330 built-in switch
[    2.380000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    2.930000] ag71xx ag71xx.0 eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    2.940000] TCP: cubic registered
[    2.940000] NET: Registered protocol family 17
[    2.950000] 8021q: 802.1Q VLAN Support v1.8
[    2.960000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    2.970000] Freeing unused kernel memory: 232K (80316000 - 80350000)
[    5.800000] usbcore: registered new interface driver usbfs
[    5.800000] usbcore: registered new interface driver hub
[    5.810000] usbcore: registered new device driver usb
[    5.810000] usbcore: registered new interface driver bitmain
[    5.820000] hash ok
[    5.820000] hashtest OK
[    5.820000] bitmain-asic: success to register device
[    5.830000] usbcore: registered new interface driver bitmainbl
[    5.840000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.850000] ehci-platform: EHCI generic platform driver
[    5.850000] ehci-platform ehci-platform: EHCI Host Controller
[    5.860000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    5.860000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    5.890000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    5.890000] hub 1-0:1.0: USB hub found
[    5.890000] hub 1-0:1.0: 1 port detected
[   10.550000] jffs2: notice: (321) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 16 of xref (0 dead, 2 orphan) found.
[   12.790000] hidraw: raw HID events driver (C) Jiri Kosina
[   12.800000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
[   12.800000] Backport generated by backports.git backports-20130617-4-ge3220f5
[   12.820000] nf_conntrack version 0.5.0 (962 buckets, 3848 max)
[   12.840000] usbcore: registered new interface driver usbhid
[   12.840000] usbhid: USB HID core driver
[   12.850000] usbcore: registered new interface driver usbserial
[   12.860000] usbcore: registered new interface driver usbserial_generic
[   12.870000] usbserial: USB Serial support registered for generic
[   12.900000] xt_time: kernel timezone is -0000
[   12.920000] cfg80211: Calling CRDA to update world regulatory domain
[   12.920000] cfg80211: World regulatory domain updated:
[   12.930000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.940000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.950000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.950000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.960000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.970000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.980000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.130000] ath: EEPROM regdomain: 0x0
[   13.130000] ath: EEPROM indicates default country code should be used
[   13.130000] ath: doing EEPROM country->regdmn map search
[   13.130000] ath: country maps to regdmn code: 0x3a
[   13.130000] ath: Country alpha2 being used: US
[   13.130000] ath: Regpair used: 0x3a
[   13.130000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.150000] cfg80211: Calling CRDA for country: US
[   13.150000] cfg80211: Regulatory domain changed to country: US
[   13.160000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.170000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   13.180000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   13.180000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.190000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.200000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.210000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   13.220000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   17.770000] device eth0 entered promiscuous mode
[   20.210000] eth1: link up (100Mbps/Full duplex)

please anyone help me  

[R4v37]

i tried to flash the firmware... no good...
tried to switch the cables... no good...
tried to switch PSU... no good... (while my PSU is working perfect with the other S1)

btw, this one is quite different
the LED light is yellow
unlike the common S1, which is the LED light is green

and, when i started this S1 (yellow LED), the LED on the blade is not blinking
maybe the blade is dead? oh god...

[Sailing_Nut]

i tried to flash the firmware... no good...
tried to switch the cables... no good...
tried to switch PSU... no good... (while my PSU is working perfect with the other S1)

btw, this one is quite different
the LED light is yellow
unlike the common S1, which is the LED light is green

and, when i started this S1 (yellow LED), the LED on the blade is not blinking
maybe the blade is dead? oh god...

I had similar problems with my S1 (I can't remember the LED color) The two things that I had to "get right" were the DNS server and my username on the pool. I know that if it can't reach the pool it will not start hashing.

First off I would use the web interface to the S1 and see if you can ping your pool. That will ensure that your IP configuration is correct. If you can't ping your pool then check the DNS configuration.

If you can ping the pool, check that your worker name and password for the pool are correct. (I forgot to prefix my worker name with my pool user name.)

One other thing that popped into my mind is the LAN settings vs WAN settings. WAN is where you make the changes so that the miner will work on your network. LAN should be set for DHCP. (I believe that LAN is used internally by the miner to communicate with the boards.)

[R4v37]

i tried to flash the firmware... no good...
tried to switch the cables... no good...
tried to switch PSU... no good... (while my PSU is working perfect with the other S1)

btw, this one is quite different
the LED light is yellow
unlike the common S1, which is the LED light is green

and, when i started this S1 (yellow LED), the LED on the blade is not blinking
maybe the blade is dead? oh god...

I had similar problems with my S1 (I can't remember the LED color) The two things that I had to "get right" were the DNS server and my username on the pool. I know that if it can't reach the pool it will not start hashing.

First off I would use the web interface to the S1 and see if you can ping your pool. That will ensure that your IP configuration is correct. If you can't ping your pool then check the DNS configuration.

If you can ping the pool, check that your worker name and password for the pool are correct. (I forgot to prefix my worker name with my pool user name.)

One other thing that popped into my mind is the LAN settings vs WAN settings. WAN is where you make the changes so that the miner will work on your network. LAN should be set for DHCP. (I believe that LAN is used internally by the miner to communicate with the boards.)

yeah, i made sure these settings...
on the other S1, all working fine

this one... after i tried to switch its control board...HOLAAAAAA
ITS WORKING, now am waiting for bitmain to reply this problem...

[chek2fire]

disable and ntpd the thing that sychronize the time. I have read that done many problems and crashes of the miner

Mon Dec  2 11:28:13 2013 daemon.info sysinit: ntpd: resolved peer 1.openwrt.pool.ntp.org to 203.34.118.4

[BCwinning]

Did anyone know a fix for the wifi hang up? I have my miner in wifi mode but after one or two days the wifi hangup and antminer stop hashing with a beep sound. If i connect it to the ethernet  it starts again to hashing.
The other problem that i have is that i cant see the interface of antminer through wifi. If i write the adress 192.168.1.99 to broswer when the machine is in wifi mode and the ethernet is unplugged it seems that antminer dont let me access it.

Wifi is not at all recommended if you need consistency and are serious in making profits.

wifi works perfect for me and a lot of others from my thread on how it performs.
I'm not sure what the issue is, connect to wan via ethernet. configure wifi, disable wan, disconnect ether cable.
Connect to wifi ip. Don't mess with the lan section at all.

[chek2fire]

Did anyone know a fix for the wifi hang up? I have my miner in wifi mode but after one or two days the wifi hangup and antminer stop hashing with a beep sound. If i connect it to the ethernet  it starts again to hashing.
The other problem that i have is that i cant see the interface of antminer through wifi. If i write the adress 192.168.1.99 to broswer when the machine is in wifi mode and the ethernet is unplugged it seems that antminer dont let me access it.

Wifi is not at all recommended if you need consistency and are serious in making profits.

wifi works perfect for me and a lot of others from my thread on how it performs.
I'm not sure what the issue is, connect to wan via ethernet. configure wifi, disable wan, disconnect ether cable.
Connect to wifi ip. Don't mess with the lan section at all.

and in my case wifi works perfect but i cant access antminer. Can you tell me in what mode do you have the firewall settings in your wifi connection?

[BCwinning]

Did anyone know a fix for the wifi hang up? I have my miner in wifi mode but after one or two days the wifi hangup and antminer stop hashing with a beep sound. If i connect it to the ethernet  it starts again to hashing.
The other problem that i have is that i cant see the interface of antminer through wifi. If i write the adress 192.168.1.99 to broswer when the machine is in wifi mode and the ethernet is unplugged it seems that antminer dont let me access it.

Wifi is not at all recommended if you need consistency and are serious in making profits.

wifi works perfect for me and a lot of others from my thread on how it performs.
I'm not sure what the issue is, connect to wan via ethernet. configure wifi, disable wan, disconnect ether cable.
Connect to wifi ip. Don't mess with the lan section at all.

and in my case wifi works perfect but i cant access antminer. Can you tell me in what mode do you have the firewall settings in your wifi connection?

wwan works off the wan firewall rules.

[R4v37]

btw, is there a way to run the miner without the control board?
or can we change the controlboard?

i have to wait bitmain to reply to my case, and have to wait him send me a good controlboard

[norgan]

btw, is there a way to run the miner without the control board?
or can we change the controlboard?

i have to wait bitmain to reply to my case, and have to wait him send me a good controlboard

from what I can see in logs etc, the cables to the boards are USB spec. I imagine if you had the pinout and that cgminer supports the s1 hardware, that you should be able to theoretically run the boards as usb devices off whatever controller you want.
I'd be interested in investigating this, I have one s1 and another 2 on the way. one controller for 6 boards (such as a RasPi) could be cool.