[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[jakiman]

the developer has deleted my message 3 times
THE TRUTH THAT ANGRY lol

UTC is the best unfair coin ever !!!

the parameters on the retarget nfactor are not communicated and a pool have  more than 51% of hasrate network

congratulations dev !!

Other coins such as Heavycoin has a pool with over 51% hash rate also...
https://bitcointalk.org/index.php?topic=506774.msg6095032#msg6095032

The reason for Ultracoin and the like have such issues is for one due to lack of multipools.
Other Scrypt coins are mined by tons of auto profit switching pools. So it can't have this problem.
But Ultracoin cannot be mined like that as N factor schedule varies between different coins.

In the meantime, I have requested some unique pool operators such as http://max.1gh.com/ to consider opening a pool for Ultracoin.

[jakiman]

Does it still work with the modded CG Miner? I kept lowering my TC settings but still only getting hardware error

It will work simply by lowering the Intensity by 1.
But it won't get you the most optimal hash rate.

[rfcdejong]

1) my 3 x 290 miner has a WU of 153 kh/s
2) my 4 x 280X miner has a WU of 154 kh/s

which make me think i should be able to tweak miner 2 a bit more

[rfcdejong]

the developer has deleted my message 3 times
THE TRUTH THAT ANGRY lol

UTC is the best unfair coin ever !!!

the parameters on the retarget nfactor are not communicated and a pool have  more than 51% of hasrate network

congratulations dev !!

Other coins such as Heavycoin has a pool with over 51% hash rate also...
https://bitcointalk.org/index.php?topic=506774.msg6095032#msg6095032

The reason for Ultracoin and the like have such issues is for one due to lack of multipools.
Other Scrypt coins are mined by tons of auto profit switching pools. So it can't have this problem.
But Ultracoin cannot be mined like that as N factor schedule varies between different coins.

In the meantime, I have requested some unique pool operators such as 1GH to consider opening a pool for Ultracoin.

I love sites like hashing.at and xhash.net

[SxC]

congratulations Bumface !!

No1 wants to see your trash talk its pointless

alltho what you have just said is great stuff carry on

[jakiman]

1) my 3 x 290 miner has a WU of 153 kh/s
2) my 4 x 280X miner has a WU of 154 kh/s

which make me think i should be able to tweak miner 2 a bit more

My 4 x 280X miner has a WU of 195 after over an hour. (Each hashing @ 55Kh/s)
That's with my cards underclocked & undervolted also. (1025/1500 @ 1.075v)

[rfcdejong]

currently what i figured out manually, this seems to be the top #3 pools

network speed 118.09 MH/s

ultra.nitro.org    148.65 MH/s
ultra2.nitro.org    28.12 MH/s
utc.greekpool.eu   5.54 MH/s

that #1 pool goes faster than the network speed?

[rfcdejong]

1) my 3 x 290 miner has a WU of 153 kh/s
2) my 4 x 280X miner has a WU of 154 kh/s

which make me think i should be able to tweak miner 2 a bit more

My 4 x 280X miner has a WU of 195 after over an hour. (Each hashing @ 55Kh/s)
That's with my cards underclocked & undervolted also. (1025/1500 @ 1.075v)

mine go 44.5 kh/s each, with ultracoinminer.exe (i haven't tried yacminer yet)

--scrypt-jane -o stratum+tcp://utc.greekpool.eu:3337 -u rfcdejong.2 -p x --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 36864 -I 12 -g 2 -w 256 --thread-concurrency 36864 --lookup-gap 4 --gpu-dyninterval 5 --no-submit-stale

[rfcdejong]

the developer has deleted my message 4 times
THE TRUTH THAT ANGRY lol

why do you keep posting this, it's pointless, except that you'r reputation (if you even had some) is going down the drain

[bumface]

the developer has deleted my message 4 times
THE TRUTH THAT ANGRY lol

why do you keep posting this, it's pointless, except that you'r reputation (if you even had some) is going down the drain

why ?
Because i tell the truth ?!

LOL

The ultracoin community is about teamwork and positivity. We pull together when its needed and your empty complaining adds no value what so ever..

Kindly add a positive contribution or move on to another coin, thank you

[SxC]

I love this coin. I designed a custom Physical Coin ( not finished yet ) , and also some Laser Engraved UTC Keychains!

The key chains finally came today!



I am listing them on a site I recently made as well!

I have it setup so I can manually take UTC payment ( can also take automated BTC, and LTC payments ), so test it out and let me know how it works!

http://www.cryptomemorabilia.com/

Any questions, send me a PM or email!

-Brian Gleason

Really nice,might get 1 or 2 of them at some point

Thanks!

I feel like giving 2 of these away!

For the next 24 hours, anyone who quotes the keychain announcement above with the picture and website link, I will enter in a drawing. I will randomly pick 2 people out of everyone who quotes my message to help get the word out!

SxC, consider yourself entered already !

-Brian

moving this up to remind people of the give-away, if they want to enter before I make the picks tonight, just quote this !

-Brian

Oh thankyou for the chance

Btw my birthday 6th April (wink wink )

Bump  cos it may of got lost in the last few pages

[Stinky_Pete]

edit:
positivity !!!!
LOL
so where are parameters ?!!

Try looking at the source code.

[jakiman]

Where are parameters for --sj-nfmin --sj-nfmax --sj-time on the retarget nfactor ?! LOL

THIS IS SO UNFAIR LOL

Those 3 are always fixed/identical regardless of N factor change:
cgminer = --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600
ultracoinminer = --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600
yacminer = --nfmin 4 --nfmax 30 --starttime 1388361600

[SxC]

edit:
positivity !!!!
LOL
so where are parameters ?!!

Try looking at the source code.

to much like hard work

[Protagonus]

Are you wanting these?  If so, it has been in the OP right at the top.


N factor explanation:

N-Factor     Seconds Since Launch     Days at N-Factor        Start Date                Memory size
4            0-524287                   6.07               12 / 30 / 13 @ 12:00:00am UTC    8KB
5            524288-786431              3.04               01 / 05 / 14 @ 01:38:08am UTC    16KB
6            786432-1048575             3.0                01 / 08 / 14 @ 02:27:12am UTC    32KB
7            1048576-1835007            9.1                01 / 11 / 14 @ 03:16:16am UTC    64KB
8            1835008-2097151            3.1                01 / 20 / 14 @ 05:43:28am UTC    128KB
9            2097152-4194303            24.2               01 / 23 / 14 @ 06:32:32am UTC    256KB
10           4194304-5242879            12.2               02 / 16 / 14 @ 01:05:04pm UTC    512KB
11           5242880-8388607            36.4               02 / 28 / 14 @ 04:21:20pm UTC    1MB
12           8388608-12582911           49                 04 / 06 / 14 @ 02:10:08am UTC    2MB
13           12582912-16777215          48                 05 / 24 / 14 @ 03:15:12pm UTC    4MB
14           16777216-33554431          194                07 / 12 / 14 @ 04:20:16am UTC    8MB
15           33554432-41943039          97                 01 / 22 / 15 @ 08:40:32am UTC    16MB

[yeshanyong131]

谁能给个R9 270的参数哦。。。谢谢！！

[bumface]

Where are parameters for --sj-nfmin --sj-nfmax --sj-time on the retarget nfactor ?! LOL

THIS IS SO UNFAIR LOL

Those 3 are always fixed/identical regardless of N factor change:
cgminer = --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600
ultracoinminer = --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600
yacminer = --nfmin 4 --nfmax 30 --starttime 1388361600

So explain to me why we have low hasrate and no communication about it

I'm curious about your answer

its unfair thats all

please take a look about high hashrates on <51% pool http://ultra.nitro.org//

LMAO

you have low hashrate becasue its scrypt jane, if you dont have basic knowledge of coins, you should not be mining.....

we are are aware of the hash distribution and im talking with the owner of nitro.

so AGAIN, your comments ad nothing, kindly leave this thread alone, we dont need your negativity, thank you

[albertocp]

Hello, can someone improve my config for a 7950? I only get 18kh/s

Code:

ultracoinminer -o stratum+tcp://ultra2.nitro.org:4337 -u albertocp.a -p a --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 10 --thread-concurrency 16384 --no-submit-stale --expiry 10 --scan-time 1 --queue 0 --gpu-engine 1040 --gpu-memclock 1250

If I put -I 11 I get 35kh/s but with some HW

another question, what is the reason of the n scrypt change?

[nanoprobe]

I DONT CARE ABOUT FLOODING THE TRUTH

release the parameters and i stop it LOL


the developer has deleted my message 4 times
THE TRUTH THAT ANGRY lol

UTC is the best unfair coin ever !!!

THE PARAMETERS ON THE RETARGET NFACTOR ARE NOT COMMUNICATED and the developer gives permission to have a pool of more than 51% network hashrate

congratulations dev !!

ok im reporting you

its a simple question :

"WHERE ARE PAREMETERS FOR RETARGET NFACTOR ?"

EXPLAIN TO ME !!!!

its unfair thats all

Its unfair that the founder does not tell you how to mine? charles lee is helping you with your LTC mining settings?

kindly go spam somewhere else now, i told you this community is about positivity, we dont need your negative cloud here, thank you

His username says it all. Ban this troll or at least hit the ignore button. Responding to a fool only makes the responder look foolish.

[Protagonus]

Hello, can someone improve my config for a 7950? I only get 18kh/s

Code:

ultracoinminer -o stratum+tcp://ultra2.nitro.org:4337 -u albertocp.a -p a --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 10 --thread-concurrency 16384 --no-submit-stale --expiry 10 --scan-time 1 --queue 0 --gpu-engine 1040 --gpu-memclock 1250

If I put -I 11 I get 35kh/s but with some HW

another question, what is the reason of the n scrypt change?

Code:

 ultracoinminer (pool info) --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --failover-only --thread-concurrency 66304 --intensity 18 --lookup-gap 3 --gpu-powertune 20 --worksize 256 --gpu-dyninterval 6 --no-submit-stale -g 1 --scan-time 1 --expiry 10 --queue 0  

The Yacminer should get a bit more Kh/s but I've not tried yet.