GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[senoy]

can you explain to me easily how to get to this script ?? I was looking for him, typing a command and I can't find it. Sure, I won't be able to overwrite it. I am asking for simple tips. just getting started . I work on hiveos. ubuntu. Thank you for your help . I can't run a gmina because I have a mix on miner gtx and RX

HiveOS? Script for gminer: /hive/miners/gminer/h-run.sh

permision denied

i can`t open . my hands come down :/ and sory for my english

[iriquel]

GMiner v1.59 With p104-100, It has VERY LOW hashrates in grin29, only 3.6g /s  vs   4.5-4.8 g/s in my gtx 1070

GMiner v1.42 p104-100, 4.5g/s, please check this.

Please check this.

[hurr1cane]

hi, any chance of making the gminer for triple SHA256t  - SHA256t ? https://bitcointalk.org/index.php?topic=4743828.0

[Zminer777]

when we will se Cuckatoo31 impruvment?

Currently we are working on improving performance for Cuckarood29, only after that.

hi, any chance of making the gminer for triple SHA256t  - SHA256t ? https://bitcointalk.org/index.php?topic=4743828.0

not sure, is it profitable? I think there are many FPGA miners.

[toy023]

Reverted back to 1.55. Pretty sure 1.59 is broken.

[91to]

sorry for maybe stupid question. If i use linux or ubuntu system, performance will be better than on windows 10 system (with same settings core, memory, etc)?
I am mining btg 144.5, windows 10, and i have two cards:
1080 ti - 96 sol/s (average)
1070    - 64 sol/s (average)
With linux will be more?

[invizion]

Please optimize 210.9 for RTX cards too

<3

[twente-mining]

same here, I much prefer running em cool and quiet with minor performance impact

1.59 --oc1 enabled
1080ti
165w
~55 Sols

Yeah, around same settings here. 165w, core +100 and mem +300 ( Smos )

just for fun, try v1.55 without --oc1 with the same settings, and you will see more hashes then with version 1.59
I saw a little more powerdraw in v1.59 but not more performance.
Thats just for the 1080ti cards.

Could be difference in brands, i have several different ones.

MSI TRIO 1080ti - 1.59 with --OC 1:

GPU0: 56,7 Sol/s
GPU0: 44 ℃ 40 % - fan
GPU0: 158.76 W

ECO - 1.59 with __OC1:

GPU0: 51,5 Sol/s
GPU0: 43 ℃ 40 % - fan
GPU0: 135.31 W


1080 gigabyte windforce 3X - 1.55

GPU0: 39,7 Sol/s
GPU1: 38,5 Sol/s
GPU2: 39,2 Sol/s
GPU3: 38,8 Sol/s
GPU4: 41,3 Sol/s
GPU5: 38,1 Sol/s
GPU6: 39,9 Sol/s
GPU0: 58 ℃ 55 % - fan
GPU1: 60 ℃ 64 %
GPU2: 61 ℃ 64 %
GPU3: 60 ℃ 57 %
GPU4: 60 ℃ 57 %
GPU5: 60 ℃ 55 %
GPU6: 61 ℃ 55 %
GPU0: 125.25 W
GPU1: 126.29 W
GPU2: 119.87 W
GPU3: 111.60 W
GPU4: 118.26 W
GPU5: 126.28 W
GPU6: 120.69 W

What are you're Core and Mem settings with 1080TI in ECO mode ?

[btc00]

GMiner v1.59 available for download

v1.59
+ improved performance on RTX2070 SUPER & RTX2080 SUPER for BeamHashII and ZelCash
+ minor performance improvements on some GTX cards for BeamHashII
+ added option to select OC kernels for each device --OC
+ added option to enable OC1 kernels for all devices (if available, currently supported only GTX1080 TI on BeamHashII algo)

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
GitHub: https://github.com/develsoftware/GMinerRelease/releases/tag/1.59

How to choose oc for each card? can an example. thx

[Zminer777]

How to choose oc for each card? can an example. thx

Suppose you have 4 GPUs.

Code:

--OC 0 1 1 0

Set OC0 (default) mode for GPU0, GPU3
Set OC1 mode for GPU1, GPU2
Miner report about this to console.

[topteam]

how use oc with .cfg file?

Code:

oc=1 1 1 1 1 1 1

only use 0 or 1?
is it oc=2 mode work?

[bitcoinminer0319]

does the gminer 1.60 support 1660/ti when i use --oc1 or not?

[Zminer777]

does the gminer 1.60 support 1660/ti when i use --oc1 or not?

only for GTX 1070 and GTX 1080 TI on BeamHashII algo atm

[Zminer777]

GMiner v1.60 available for download

v1.60
+ support AMD cards for ZelCash
+ improved performance for Equihash 144.5/192.7 on RTX SUPER cards
+ support OC parameter in config files
+ added OC1 kernel for BeamHashII for GTX 1070

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
GitHub: https://github.com/develsoftware/GMinerRelease/releases/tag/1.60

[ayiphelmy]

does the gminer 1.60 support 1660/ti when i use --oc1 or not?

only for GTX 1070 and GTX 1080 TI on BeamHashII algo atm

1070TI? 2080TI?

[ekiller]

How to use OC1 kernels  on command line ?  what is parameters ?

[scryptr]

How to use OC1 kernels  on command line ?  what is parameters ?

THE SYNTAX IS STRICT--

For a simple command line flag, it took a while to figure out.  If you have one (1) card try:

        "miner -a algorithm --OC 1"

If you have four (4) cards try:

        "miner -a algorithm --OC 1 1 1 1"

The flag is space-delineated, do not use commas.  If you have a weak card that will not work with an overclock (OC) kernel, use "0" instead of "1".  A setting of "0" is the same as default, or no setting at all.  If you have improper syntax, the miner may not launch.

I do not believe that setting "--OC 1" for a multi-card rig will work properly, each separate card must have a corresponding "0" (no overclock), or "1" (overclock).

My 3GB 1060 cards and my 1070ti cards see a slight improvement at best.  If I am wrong, please correct me if you know better.       --scryptr

[Dr_Victor]

How to use OC1 kernels  on command line ?  what is parameters ?

THE SYNTAX IS STRICT--

For a simple command line flag, it took a while to figure out.  If you have one (1) card try:

        "miner -a algorithm --OC 1"

If you have four (4) cards try:

        "miner -a algorithm --OC 1 1 1 1"

The flag is space-delineated, do not use commas.  If you have a weak card that will not work with an overclock (OC) kernel, use "0" instead of "1".  A setting of "0" is the same as default, or no setting at all.  If you have improper syntax, the miner may not launch.

I do not believe that setting "--OC 1" for a multi-card rig will work properly, each separate card must have a corresponding "0" (no overclock), or "1" (overclock).

My 3GB 1060 cards and my 1070ti cards see a slight improvement at best.  If I am wrong, please correct me if you know better.       --scryptr

I am using '--oc1'  for 7-card rig.

[scryptr]

How to use OC1 kernels  on command line ?  what is parameters ?

THE SYNTAX IS STRICT--

For a simple command line flag, it took a while to figure out.  If you have one (1) card try:

        "miner -a algorithm --OC 1"

If you have four (4) cards try:

        "miner -a algorithm --OC 1 1 1 1"

The flag is space-delineated, do not use commas.  If you have a weak card that will not work with an overclock (OC) kernel, use "0" instead of "1".  A setting of "0" is the same as default, or no setting at all.  If you have improper syntax, the miner may not launch.

I do not believe that setting "--OC 1" for a multi-card rig will work properly, each separate card must have a corresponding "0" (no overclock), or "1" (overclock).

My 3GB 1060 cards and my 1070ti cards see a slight improvement at best.  If I am wrong, please correct me if you know better.       --scryptr

I am using '--oc1'  for 7-card rig.

DOES THE MINER EVEN LAUNCH? --

The flag is "--OC", followed by a space, as in "--OC 1".  If you actually typed "--oc1", the flag that you presented may be completely ignored, at best.  The string"--oc1" is not a correct flag.

Do you notice any improvement in hash rate?  What I do notice is that upon initial launch, there is no report to the console that the overclock kernel is being activated by the miner program.  If there is any improvement in Equihash, it is small.       --scryptr

[fapar]

Prompt cards RX480/580 the following parameters: -- oc/oc1 is supporting? Where can I read about this setting and which graphics cards are supported?
On my Giga 580 MI get average 16.3-16.5 Sol/s.