【BOT】 🌟 C.A.T. Cryptocurrency Automatic Trader 🌟 (New Price List 04/2021)

[Sampey]

C.A.T. 5.0 BETA Is READY

Current Changelog

- Now The SELL Pool is expressed as Qty (Easier To use, more precise in calculation). To obtain this, these changes has been done :
  - Split option "Set Pool Value Amount to 0 If Current Amount is <" in 2 separate options, 1 for sell, 1 for buy
  - Changes Buy/Sell Pool GUI Interface/Some Log Messages (about PONG into Buy/SEll Pool)/Some Labels on GUI/Various code
- Now Preview From Buy Sell Pool Is more Precise and you have 2 button, 1 for Buy Preview and 1 For Sell Preview
- New Parameters Added to the Buy/Sell Pool Options "Stop Ping Creation if Total <MARKET> Orders Qty is > X"
- Gui Improvements/Code Fix (Thanks to CAT users)
- When you STOP PROCESS CAT Is not able to FORCE the stop action even if Lookup Is Running
- 2 Change For Order & Trades Edit Panel :
  1 - After set new Qty/Price/Type values you will have an ORANGE table line that stands for "Order is going to be recreated"
  2 - If you edit Again a Ping/Pong Order and you re-confirm original values, then Recreation will be aborted and table line will change from ORANGE to WHITE
- Added a new option in Main Frame TOOLS -> Restart C.A.T. With more RAM, that allows you to restart C.A.T. using ram size from 512 to 4096 MB (According to your HW Available RAM)
- A New Panel "STOP PING" is added to the Ping-Pong Parameters Panel. You will find 6 Stop Ping Options Inside.
- CAT Is now able to find trades even if they occured on the previous OrderId (Before a Recreation).
  This is unlike to happens but sometimes exchanges are slow in return updates data
- Any Ping-Pong Order have now an internal ID. You will read in description String (CAT-XXXX/<ExchangeOrderId>)
  This is useful to trace your order inside the log even when OrderId Change and it will be useful for future features
- Load Balance from MyBalances panel is now asynchronized call (you don't have to wait until load complete, useful when exchanges are very slow)
- Added 2 Filter options : Skip Buy/Sell Orders With Price Between Best Price And Best Price - X%
  - This will allow to skip top book orders and create ping.pong inside orders book
- The Option "Merge Equal Trades Into a New One" is now TRUE By default (this is useful especially when your order is immediatedly filled with 2 or more trades)
- If an XML C.A.T. file older than 3 CAT Version is used by Current Version you will receive a suggestion message about resave it (in the general console/pop up message)


You can PM Me since Now and Start Using the New Version.
User test during beta phase could help me a lot to find some complex bug and remove them before official release.

Thanks to all the customers that will help me

First users are already testing new Version.
No problem until now 

[1714167173]

1714167173

[1714167173]

1714167173

[jdacal]

I'm thinking of dedicating a PC to use only for C.A.T.  I would likely be using it on two exchanges with anywhere from 20 to 30 markets per exchange.  Could someone suggest minimum Hardware and memory for a  setup like this?   This would be on a Windows machine.

Also, would I get better performance from one PC per exchange instead of one?

Thanks!

[jdacal]

Is there a detailed description of how the Buy/Sell Pool works anywhere?  I'm having a hard time wrapping my head around it by just reading the individual settings in the manual, and have not found a post that really goes into detail on it.

[Sampey]

Is there a detailed description of how the Buy/Sell Pool works anywhere?  I'm having a hard time wrapping my head around it by just reading the individual settings in the manual, and have not found a post that really goes into detail on it.

BSP is very simple, you will find a description with behaviour here : https://bitcointalk.org/index.php?topic=507103.msg5590902#msg5590902 paragraph "- How Does a Ping-Pong Cycle Work?"

From the next Version, Buy Pool will be in PartnerCurrency (QTYXPRICE = TOTAL) and Sell pool will be in Market Currency (QTY)
In other words on a market LTC/BTC where you buy / sell LTC, you will have SELL Pool in LTC and Buy Pool in BTC

[jdacal]

Is there a detailed description of how the Buy/Sell Pool works anywhere?  I'm having a hard time wrapping my head around it by just reading the individual settings in the manual, and have not found a post that really goes into detail on it.

BSP is very simple, you will find a description with behaviour here : https://bitcointalk.org/index.php?topic=507103.msg5590902#msg5590902 paragraph "- How Does a Ping-Pong Cycle Work?"

From the next Version, Buy Pool will be in PartnerCurrency (QTYXPRICE = TOTAL) and Sell pool will be in Market Currency (QTY)
In other words on a market LTC/BTC where you buy / sell LTC, you will have SELL Pool in LTC and Buy Pool in BTC

Thanks Sampey

[Sampey]

C.A.T. 5.0 BETA Is READY

Pm me to get your copy 

[Joetalk]

Hello, I am trying to buy and download your Bot, but the system does not allow me? Can you assist please?

[Sampey]

Hello, I am trying to buy and download your Bot, but the system does not allow me? Can you assist please?

Can you pls pm me?

[Turing]

Will there be a C.A.T. update for the Waves DEX trade platform too?

[Sampey]

Will there be a C.A.T. update for the Waves DEX trade platform too?

If it's technically possible, why not ? 

[statdude]

What about for OpenLedger



Also Sampey I sent some feedback on the new "skip orders %" feature.

it should be looking at the MIDDLE of the market (average of best buy/sell), not skipping first % of orders.

So, if market is $1 buy and $1.05 sell, and I say skip 2% from market price, it should just skip any orders within 2% of the average of $1 and $1.05 (which is $1.025).

So, this would be calculated as:

Best ASK: $1.05
Best BID: $1.00

Feature: Skip X% = 2%

First, Calculate "market price" (Average of Best Bid and Best Ask) = $1.025

Then,

Skip to Bid = Market Price * 98% = $1.0045
Skip to Ask = Market Price * 102% = $1.0455

How it is currently calculated, it would have just looked at Bid $1.00 and done 98%, so $0.98. This is not correct or useful. Thank you if you can fix this  

Instead it should be named:

Skip Buy Orders With Price Within Market Price Average - X%
Skip Sell Orders With Price Within Market Price Average + X%

I hope you can make this fix in 5.1 so this becomes useful in letting me sit on top of the order book AS LONG as a sniper bot isn't pushing me all the way into the other side of the order book. That is the point of it. If it doesn't take the average of bid / sell and only looks at one side of order book, it is not useful...

[ewibit]

since yesterday I test the new CAT 5.0 on another PC and since xx hours the GUI is frozen and no input possible 



as you can see in the meantime CAT log is 373 MB

should I send you this?

[Sampey]

since yesterday I test the new CAT 5.0 on another PC and since xx hours the GUI is frozen and no input possible 



as you can see in the meantime CAT log is 373 MB

should I send you this?

No, i know about this problem, fixed yesterday and new version will be ready tonight.
It's always the same problem : the GUI Log crash in certain situation and from that point any add to the log generate an error.

Thanks

[brazilman37]

since yesterday I test the new CAT 5.0 on another PC and since xx hours the GUI is frozen and no input possible 



as you can see in the meantime CAT log is 373 MB

should I send you this?

No, i know about this problem, fixed yesterday and new version will be ready tonight.
It's always the same problem : the GUI Log crash in certain situation and from that point any add to the log generate an error.

Thanks

im loving this software so far, cant wait to get my hands on a copy and try it out.

Brazilman37BTC

[Elmit]

I am thinking to get C.A.T. out from my desktop to an ASUS tinker board (Raspberry like/size with 2 GB RAM), and want to connect to that via VNC. What do you think about that?

[mulde]

I am thinking to get C.A.T. out from my desktop to an ASUS tinker board (Raspberry like/size with 2 GB RAM), and want to connect to that via VNC. What do you think about that?

I've used CAT with my Raspberry and VNC. It worked.


Anybody wants to buy a C.A.T. licence?

[Sampey]

How to download?

you must buy a copy 

[ewibit]

No, i know about this problem, fixed yesterday and new version will be ready tonight.
It's always the same problem : the GUI Log crash in certain situation and from that point any add to the log generate an error.

Thanks

what to do?
4 hours ago clicked at load Balance (Liqui)
nothing happens, not even be able to change to another exchange

(CAT 4.9, 1210 RAM, VPS)

[Sampey]

No, i know about this problem, fixed yesterday and new version will be ready tonight.
It's always the same problem : the GUI Log crash in certain situation and from that point any add to the log generate an error.

Thanks

what to do?
4 hours ago clicked at load Balance (Liqui)
nothing happens, not even be able to change to another exchange

(CAT 4.9, 1210 RAM, VPS)

Restart CAT. I think there's no other solution.

[ewibit]

what to do?
4 hours ago clicked at load Balance (Liqui)
nothing happens, not even be able to change to another exchange

(CAT 4.9, 1210 RAM, VPS)

Restart CAT. I think there's no other solution.

what means to spend another day of my life for rearrangement of CAT 

No, I am so peeved of every few days to start from beginning

I am not a schoolboy, I have to work, my time is restricted, there is a RL too, I have investet hundreds of hours in the last years in CAT because always there is some issue and have to restart or so,
I want to run the prog for ~ 4 weeks continuous (max. 1 day/month is ok to keep with CAT)
if you know some native linux programs - > you start it and it will run till you shutdown your PC or VPS etc.

look at e.g. leonArdo

https://bitcointalk.org/index.php?topic=1467939.msg14812054#msg14812054

if you have to reboot, after 5 minutes you can start where you have stopped 5 minutes ago...

desperately disappointed now