[XMR] Monero - A secure, private, untraceable cryptocurrency

[Maui72]

Hello to all,

I have a problem:
I created a monero wallet from moneroaddress.org
so I sent 2.17999 from kraken to the created address,
I entered monerujo from android device with the view key and I instantly saw the transaction unconfirmed, thinking it was all ok I closed, after a few hours I came back to see if everything was ok and the transaction did not appear and the balance of the wallet was 0. I tried to get on mymonero with the seed and also I balance 0.
after contacting kraken I was told that their system was successful and they told me to try installing the wallet 0.12.0.0 or newer.
I tried to install it, if I try to import the wallet with the keys insert address view key and spend key but do not appear the arrow to continue, if the amount via seed the balance is at 0 but the public address that appears to me is different from the one created by moneroaddress.org.

transaction id: 77964812131c15442ade7f183172e495e5542c6e04fb7ecd5e6c18b3819c280f
Address: 449EGG2ZvpWdegNnzyyYsYCbJ3AgmLZkxZojRQoxBwz6e14qnX9Epo49bgzXSHkx68b4XbLkzArxXYf R2E9LKHsY8rPZFzM

Is there a possibility that the created wallet and its keys are tied to a previous fork?

Can someone help me?

[Yle725]

Hello, is it true that if I turn all my BTC in monero and back in another wallet, they will be completely untraceable?

[visdude]

Hello, is it true that if I turn all my BTC in monero and back in another wallet, they will be completely untraceable?

If you meant "back in another (BTC) wallet", then yes, it will acquire untraceability/anonymity at that point to the extent that Monero could offer. But then again, eventual transaction on that new BTC wallet would reestablish traceability, depending on the obfuscation methods you employ from that point on. Why not just stick and stay with XMR then?

 

[Anon136]

Hello, is it true that if I turn all my BTC in monero and back in another wallet, they will be completely untraceable?

Trying to "mix" your bitcoin in a tumbler is pretty much crap. It doesn't really work. What you describe isn't just a way to anonymize your bitcoins, it is, as far as I am aware, the only way to anonymize your bitcoins. It is the only way to actually achieve what people think they are achieving when they use tumblers.

Don't forget to use tor and vpns and what ever else though as well. Hiding your block chain activity is only half the battle, you also have to conceal your IP address.

[zot57]

How to create backup for the Wallet?

[visdude]

How to create backup for the Wallet?

For GUI on Windows, copy and save the wallet files (Documents\Monero\wallets) and the seed/keys (Settings/Seed & Keys).

[ValerieChristaldi]

Monero price at $278 highest of the month. Check it out: https://www.coinranker.net/cryptocurrency/monero

[dEBRUYNE]

Hello to all,

I have a problem:
I created a monero wallet from moneroaddress.org
so I sent 2.17999 from kraken to the created address,
I entered monerujo from android device with the view key and I instantly saw the transaction unconfirmed, thinking it was all ok I closed, after a few hours I came back to see if everything was ok and the transaction did not appear and the balance of the wallet was 0. I tried to get on mymonero with the seed and also I balance 0.
after contacting kraken I was told that their system was successful and they told me to try installing the wallet 0.12.0.0 or newer.
I tried to install it, if I try to import the wallet with the keys insert address view key and spend key but do not appear the arrow to continue, if the amount via seed the balance is at 0 but the public address that appears to me is different from the one created by moneroaddress.org.

transaction id: 77964812131c15442ade7f183172e495e5542c6e04fb7ecd5e6c18b3819c280f
Address: 449EGG2ZvpWdegNnzyyYsYCbJ3AgmLZkxZojRQoxBwz6e14qnX9Epo49bgzXSHkx68b4XbLkzArxXYf R2E9LKHsY8rPZFzM

Is there a possibility that the created wallet and its keys are tied to a previous fork?

Can someone help me?

Could you first use this guide to verify that your transaction correctly arrived at your address?

https://monero.stackexchange.com/questions/6137/how-do-i-as-a-recipient-verify-that-my-transaction-actually-arrived

[Maui72]

I solved right now ...
the problem was that the 'GUI' version did not load correctly the Wallet from keys, monerujo and mywallet gave me 0 transactions and 0 balance, I tried the 'CLI' version and I saw the light
sincerely after this negative experience I will stay away from monero wallet as long as they are more user friendly.
thank you

[dEBRUYNE]

I solved right now ...
the problem was that the 'GUI' version did not load correctly the Wallet from keys, monerujo and mywallet gave me 0 transactions and 0 balance, I tried the 'CLI' version and I saw the light
sincerely after this negative experience I will stay away from monero wallet as long as they are more user friendly.
thank you

The issue may have been caused by you setting an erroneous restore height:

https://monero.stackexchange.com/questions/7581/what-is-the-relevance-of-the-restore-height

[mattcode]

How to create backup for the Wallet?

You can back up the .keys file like visdude said above, but I think the best solution would be to write down your 25 seed words and keep them some place safe.

[smooth]

How to create backup for the Wallet?

You can back up the .keys file like visdude said above, but I think the best solution would be to write down your 25 seed words and keep them some place safe.

That is the best way to make sure you don't lose your coins but it is also useful to back up the wallet cache file itself since it contains useful extra information beyond the minimum needed to recover coins (payment ledger, per-tx keys for proving payment).

[Maui72]

I solved right now ...
the problem was that the 'GUI' version did not load correctly the Wallet from keys, monerujo and mywallet gave me 0 transactions and 0 balance, I tried the 'CLI' version and I saw the light
sincerely after this negative experience I will stay away from monero wallet as long as they are more user friendly.
thank you

The issue may have been caused by you setting an erroneous restore height:

https://monero.stackexchange.com/questions/7581/what-is-the-relevance-of-the-restore-height

It was one of the first things I thought, in monerujo I also tried to restore from block 0.
the strange thing is that windows gui did not even allow me to load the wallet from the keys, perhaps there are incompatibilities between the wallet created offline by monero-wallet-generator (the last version I found is October 2017) and the new wallet 0.12.0.0 Lithium Luna.

[visdude]

How to create backup for the Wallet?

You can back up the .keys file like visdude said above, but I think the best solution would be to write down your 25 seed words and keep them some place safe.

Ergo:

For GUI on Windows, copy and save the wallet files (Documents\Monero\wallets) and the seed/keys (Settings/Seed & Keys).

[46xPRGs]

Good day,

can't start monerod (Version: 0.12.0.0 Lithium Luna) on WIN XP SP3, receive the following error - the procedure entry point if_indextoname could not be located in the dynamic link library IPHLPAPI.DLL

Who knows how to fix it without changing the system..previous fork works good

[misterbigg]

Monero is not an investment vehicle, is designed to work as a currency an complete privacy

[Call_Me_Bambi]

Good day,

can't start monerod (Version: 0.12.0.0 Lithium Luna) on WIN XP SP3, receive the following error - the procedure entry point if_indextoname could not be located in the dynamic link library IPHLPAPI.DLL

Who knows how to fix it without changing the system..previous fork works good

Windows XP !!! OMG, I did not know you could run this stuff on a Windows XP machine. I'll have to dig out and dust down my old XP machine and give it a go.

[Gvest]

The people, help!
He made a withdrawal from the Poloneks exchange on his wallet. Judging by the data from the stock exchange, the withdrawal was successful. And when the blocks on the purse were fully loaded, I saw that the balance of 0 coins and transfers was not. It's useful to look at the transaction in the blockchain. And then the fun began, on minergate.com and chainradar.com, the transaction on the hash listed on the exchange is visible, but on moneroblocks.info it is not there! Tell me what to do please.

Txid: 3eaa141b6bc32980dfeebf05e8da1222864e225fc11ae2fb02cffc099a15e9d9

[dEBRUYNE]

The people, help!
He made a withdrawal from the Poloneks exchange on his wallet. Judging by the data from the stock exchange, the withdrawal was successful. And when the blocks on the purse were fully loaded, I saw that the balance of 0 coins and transfers was not. It's useful to look at the transaction in the blockchain. And then the fun began, on minergate.com and chainradar.com, the transaction on the hash listed on the exchange is visible, but on moneroblocks.info it is not there! Tell me what to do please.

Txid: 3eaa141b6bc32980dfeebf05e8da1222864e225fc11ae2fb02cffc099a15e9d9

That transaction is mined on the correct chain, as can be seen from here:

https://xmrchain.net/search?value=3eaa141b6bc32980dfeebf05e8da1222864e225fc11ae2fb02cffc099a15e9d9

Have you tried this guide?

https://monero.stackexchange.com/questions/6640/i-am-missing-not-seeing-a-transaction-to-in-the-gui-zero-balance

[dEBRUYNE]

Good day,

can't start monerod (Version: 0.12.0.0 Lithium Luna) on WIN XP SP3, receive the following error - the procedure entry point if_indextoname could not be located in the dynamic link library IPHLPAPI.DLL

Who knows how to fix it without changing the system..previous fork works good

Have you tried launching via the start-low-graphics-mode.bat batch file that is included?