[XMR] Monero - A secure, private, untraceable cryptocurrency

[dEBRUYNE]

@DStefanov you likely need to do a ‘sweep_unmixable’ because of having old non ringct outputs:

https://monero.stackexchange.com/questions/3508/what-does-the-sweep-unmixable-button-in-the-current-version-of-the-gui-do#3517

https://www.reddit.com/r/Monero/comments/8bilrs/comment/dx7in2o

I understand, but the "sweep" option is activated !!! I guess everyone sees this !!! In my case, what else should I do?
When I press the "sweep" button it gives me this error:

Can anyone describe step by step what I need to do to withdraw funds from this damn wallet?

The error message shows that the 'unmixable' outputs you possess can only be transferred whilst using a local node. Which operating system are you using? Then I can provide specific instructions.

The operating system I use is Windows 10 Pro x64.
Thank you in advance @dEBRUYNE.

Try these steps:

1. Close all Monero related software.

2. Reboot your system.

3. Open monerod.exe

4. This will start the sync of the local node. You can type status into the command prompt window to get a status overview. If you have to exit the software, make sure to type exit in order to stop it gracefully.

5. Note that you can sync periodically. The sync will simply pick up where it left off.

6. Once you are fully synced, you can open the GUI (the GUI will automatically connect to the daemon (monerod) that is running separately).

7. You should now be able to perform your transaction.

Let me know if you have any further questions.

[DStefanov]

@DStefanov you likely need to do a ‘sweep_unmixable’ because of having old non ringct outputs:

https://monero.stackexchange.com/questions/3508/what-does-the-sweep-unmixable-button-in-the-current-version-of-the-gui-do#3517

https://www.reddit.com/r/Monero/comments/8bilrs/comment/dx7in2o

I understand, but the "sweep" option is activated !!! I guess everyone sees this !!! In my case, what else should I do?
When I press the "sweep" button it gives me this error:

Can anyone describe step by step what I need to do to withdraw funds from this damn wallet?

The error message shows that the 'unmixable' outputs you possess can only be transferred whilst using a local node. Which operating system are you using? Then I can provide specific instructions.

The operating system I use is Windows 10 Pro x64.
Thank you in advance @dEBRUYNE.

Try these steps:

1. Close all Monero related software.

2. Reboot your system.

3. Open monerod.exe

4. This will start the sync of the local node. You can type status into the command prompt window to get a status overview. If you have to exit the software, make sure to type exit in order to stop it gracefully.

5. Note that you can sync periodically. The sync will simply pick up where it left off.

6. Once you are fully synced, you can open the GUI (the GUI will automatically connect to the daemon (monerod) that is running separately).

7. You should now be able to perform your transaction.

Let me know if you have any further questions.

Thank you for the instructions. I let it sync, but obviously it will take a long time. The only thing that impressed me was that monerod.exe had to run it as an administrator.
Once it syncs I will write what I did
Thanks a lot @dEBRUYNE.

[btc-mike]

Remember these days?   

I just found the link on redit

https://bitcointalk.org/index.php?topic=583449.msg8488694#msg8488694

I do.

[dEBRUYNE]

@DStefanov you likely need to do a ‘sweep_unmixable’ because of having old non ringct outputs:

https://monero.stackexchange.com/questions/3508/what-does-the-sweep-unmixable-button-in-the-current-version-of-the-gui-do#3517

https://www.reddit.com/r/Monero/comments/8bilrs/comment/dx7in2o

I understand, but the "sweep" option is activated !!! I guess everyone sees this !!! In my case, what else should I do?
When I press the "sweep" button it gives me this error:

Can anyone describe step by step what I need to do to withdraw funds from this damn wallet?

The error message shows that the 'unmixable' outputs you possess can only be transferred whilst using a local node. Which operating system are you using? Then I can provide specific instructions.

The operating system I use is Windows 10 Pro x64.
Thank you in advance @dEBRUYNE.

Try these steps:

1. Close all Monero related software.

2. Reboot your system.

3. Open monerod.exe

4. This will start the sync of the local node. You can type status into the command prompt window to get a status overview. If you have to exit the software, make sure to type exit in order to stop it gracefully.

5. Note that you can sync periodically. The sync will simply pick up where it left off.

6. Once you are fully synced, you can open the GUI (the GUI will automatically connect to the daemon (monerod) that is running separately).

7. You should now be able to perform your transaction.

Let me know if you have any further questions.

Thank you for the instructions. I let it sync, but obviously it will take a long time. The only thing that impressed me was that monerod.exe had to run it as an administrator.
Once it syncs I will write what I did
Thanks a lot @dEBRUYNE.

You're welcome and let me know if you need any further assistance.

[DStefanov]

Everything happened as you wrote. I managed to transfer all the coins to the exchange.
Thanks a lot @dEBRUYNE.

[bitebits]

Good to hear DStefanov and thanks for confirming.

Can you perhaps explain dEBRUYNE why in this case being connected to a remote node has a different result than being connected to your own?

[dEBRUYNE]

Everything happened as you wrote. I managed to transfer all the coins to the exchange.
Thanks a lot @dEBRUYNE.

Glad to hear it resolved your issue and you're welcome.

[dEBRUYNE]

Good to hear DStefanov and thanks for confirming.

Can you perhaps explain dEBRUYNE why in this case being connected to a remote node has a different result than being connected to your own?

The amount of inputs a transaction can use is limited in case of utilizing a remote node (I do not remember the exact reason off the top of my hat). No such limit is in place in case of using a local node.

Note that the threshold is quite high and is typically not reached by a user, especially after RingCT was introduced.

[Sipizter]

Good to hear DStefanov and thanks for confirming.

Can you perhaps explain dEBRUYNE why in this case being connected to a remote node has a different result than being connected to your own?

The amount of inputs a transaction can use is limited in case of utilizing a remote node (I do not remember the exact reason off the top of my hat). No such limit is in place in case of using a local node.

Note that the threshold is quite high and is typically not reached by a user, especially after RingCT was introduced.

Didn't the error message he got say something about --restricted-rpc? Could it be that if the remote node runs with --restricted-rpc option then the sweep unmixable doesn't work?

[Hueristic]

Will the new announcement from Chainanalysis make people move their funds from Dash and ZCash to Monero? Any guesses?

https://bitcointalk.org/index.php?topic=5254231
https://blog.chainalysis.com/reports/introducing-chainalysis-investigation-compliance-support-dash-zcash

[Globb0]

Will the new announcement from Chainanalysis make people move their funds from Dash and ZCash to Monero? Any guesses?

https://bitcointalk.org/index.php?topic=5254231
https://blog.chainalysis.com/reports/introducing-chainalysis-investigation-compliance-support-dash-zcash

Volume is rising what else can help Monero. We just kept edging down. But never back up a bit.


:/

 

[bbc.reporter]

I have been following the news on Steem versus Hive issue and the how those 2 projects might be presently considered failed.

smooth was also considerate enough to post his own insights.

https://bitcointalk.org/index.php?topic=5229982.msg53991504#msg53991504

In any case, this might open a space for another project similar to Steem which can be developed on Tari? /r/monero has 172k members, /r/aeon has 5.1k members, smooth has experience from being a Steem validator hehehe.

[e-coinomist]

Looking for source code, have found https://web.getmonero.org/downloads/hashes.txt but it lacks any checksums for sources, only binaries.

[Iamtutut]

Looking for source code, have found https://web.getmonero.org/downloads/hashes.txt but it lacks any checksums for sources, only binaries.

https://github.com/monero-project/monero

[Hueristic]

https://bitcointalk.org/index.php?topic=5255623.0

[pinpins]

 
You can mine Monero at autoexchange mining pool Zergpool.com at 0.5% fee. Please use following commands for different mining options
 
Option 1 Auto coin switch mining by profitability within algorithm with autoexchange to specified coin wallet(BTC in example below)

Code:

  -a rx/0 -o stratum+tcp://randomx.mine.zergpool.com:4448 -u <YOURBTCWALLET> -p c=BTC 

Option 2 Direct coin mining with payout to coin wallet

Code:

  -a rx/0 -o stratum+tcp://randomx.mine.zergpool.com:4448 -u <YOURXMRWALLET> -p c=XMR,mc=XMR

Option 3 Direct coin mining with autoexchange to specified coin wallet(BTC in example below)

Code:

  -a rx/0 -o stratum+tcp://randomx.mine.zergpool.com:4448 -u <YOURBTCWALLET> -p c=BTC,mc=XMR

Please note mc stands for mining coin symbol, c stand for payout coin symbol

Autoexchange to BTC, LTC, DASH, BCH, DOGE or any other currency we mine
Happy mining,
 cheers pinpin

[NeuroticFish]

You can mine Monero at autoexchange mining pool Zergpool.com at 0.5% fee. Please use following commands for different mining options

I guess that this this announcement's place is in [XMR] Monero Mining.
Here it may be "lost" after a few pages of posting.

[Hueristic]

You can mine Monero at autoexchange mining pool Zergpool.com at 0.5% fee. Please use following commands for different mining options

I guess that this this announcement's place is in [XMR] Monero Mining.
Here it may be "lost" after a few pages of posting.

Not lately!

This thread has been dead, I guess thats what happens when everything JUST WORKS as intended!

[NeuroticFish]

Here it may be "lost" after a few pages of posting.

Not lately!

This thread has been dead, I guess thats what happens when everything JUST WORKS as intended!

Well, this is bad. Active thread is a form of advertising, whether there are problems or the things are going great and there's nothing to complain about.
I guess that we should start discussing politics here (j/k).

On the other hand, a pool is expected to run for years. And I doubt that somebody would look 2 pages back on this thread if he's looking for a mining pool, especially as the first post tells that mining info should be in the other thread.

[Pipasol]

Is the extraction difficulty, which has greatly increased on the network in recent months, due to ASICS?