toxic0n
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 413
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 03:04:06 PM |
|
Anyone trying to mine at BetaRigs with this distro? Keep getting this error: stratum_recv_line failed when trying either of these two pools: stratum+tcp://r3026.g63.rigs.eu.betarigs.com:6192 http://eu.betarigs.com:3333No shares attempted at all... These work just fine in my cgminer instances, but this is the first time I've used cpuminer. EDIT: I enabled debug mode, but it didn't give me much more info... https://i.imgur.com/qOENVdR.pngIs your rig rented out when this happens? Mine will do that as well when the rig is not rented. Once someone rents it, the pool becomes alive and cpuminer switches over to it after a few minutes. Yes, it is. EDIT: Would you mind posting your config file? Maybe there's some small difference... Sure, here it is, very basic { "gc3355-detect": true, "freq": "1200", "log": "\/var\/log\/minera\/cpuminer.log", "debug": true, "pools": [ { "url": "stratum+tcp:\/\/r3753.g90.rigs.eu.betarigs.com:6801", "user": "toxic0n", "pass": "x" }, { "url": "stratum+tcp:\/\/stratum.nicehash.com:3333", "user": "1ToxicssQH8c8v2XZKboryudYrvPy775z", "pass": "p=3.3" }, { "url": "stratum+tcp:\/\/uswest.wafflepool.com:3333", "user": "1ToxicssQH8c8v2XZKboryudYrvPy775z", "pass": "x" }, { "url": "stratum+tcp:\/\/sf.clevermining.com:3333", "user": "1ToxicssQH8c8v2XZKboryudYrvPy775z", "pass": "x" } ] }
|
|
|
|
sandor111
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 04:04:11 PM |
|
Changing pools is now possible with the API Syntax is: {"set" : "pool", "pool" : (pool_id)} Pool_id can be obtained from: Pool_id = pool.priority
|
|
|
|
fivejonnyfive
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 04:06:01 PM |
|
Changing pools is now possible with the API Syntax is: {"set" : "pool", "pool" : (pool_id)} Pool_id can be obtained from: Pool_id = pool.priority That is fantastic! Looking forward to this hopefully being implemented into minera to enable live pool switching.
|
|
|
|
LexMine
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 04:15:31 PM |
|
Please be patient with me. New to the Rpi b model & minera, not yet in hand yet. I read in the readme.md that "You can choose for a img file to put in your SD Card or for a manual install."
Example of Rpi & Minera:? Is minera basically like a mini OS and may be put on an SD card, bootup the Rpi just like a PC, and Rpi will boot to minera?
Thank you guys, cannot wait, right excited too try this out!
No it´s a Unix based Webserver with a PHP frontend. You can boot it and connect via Webbrowser from a PC to Minera, to controll it via Web Frontend
|
|
|
|
gbyg
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 71
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 04:22:36 PM |
|
I have same problem. I use 20 second delay for miner to start after reboot. You will find this option in control panel. Also make sure ur zone setup for RPI match the time shows in minera dashboard.
Can you run Minera with up to 5 Bades? I mean the dashboard works with up to 5 Blades? Sorry forget to mention I get this error with my 18 grid seed(5 chip). But it is weird because it is happen always 5AM in morning. I have latest compiled from github .
|
|
|
|
chinatom
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 71
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 05:04:34 PM |
|
help. i usb pi (minera web) connect 10 pis g-blade(25mHASH) .. click Dashboard ...can't see any information ,
just~~
" I can't get the stats from your minerd. Please try to refresh the page or check your settings (minerd API must listen on 127.0.0.1:4028). "
in the page.
plz help me
when i used 4pic(8 blade), ti is ok . use 5 pic .. not ok. Yes, there is a problem getting the stats when there are so much chips/blades connected. Do you have the latest commit? Please try: cd /var/www/minera sudo git pull sudo ./upgrade_minera.sh
The retry to refresh the dashboard. i do it all(successful) and reboot system,but the same problem. 4 pis is ok . miningpool shows the minging hash is ok. I have same problem. I use 20 second delay for miner to start after reboot. You will find this option in control panel. Also make sure ur zone setup for RPI match the time shows in minera dashboard. HOW TO SYNC ZONE SETUP MATCH RPI. NOW I CAN'S SEE ANY DASHBOARD so i down konw the dashboard time. ...
|
|
|
|
gbyg
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 71
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 05:19:34 PM |
|
help. i usb pi (minera web) connect 10 pis g-blade(25mHASH) .. click Dashboard ...can't see any information ,
just~~
" I can't get the stats from your minerd. Please try to refresh the page or check your settings (minerd API must listen on 127.0.0.1:4028). "
in the page.
plz help me
when i used 4pic(8 blade), ti is ok . use 5 pic .. not ok. Yes, there is a problem getting the stats when there are so much chips/blades connected. Do you have the latest commit? Please try: cd /var/www/minera sudo git pull sudo ./upgrade_minera.sh
The retry to refresh the dashboard. i do it all(successful) and reboot system,but the same problem. 4 pis is ok . miningpool shows the minging hash is ok. I have same problem. I use 20 second delay for miner to start after reboot. You will find this option in control panel. Also make sure ur zone setup for RPI match the time shows in minera dashboard. HOW TO SYNC ZONE SETUP MATCH RPI. NOW I CAN'S SEE ANY DASHBOARD so i down konw the dashboard time. ... I don't think time zone is an issue.
|
|
|
|
LexMine
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 05:53:48 PM |
|
Please be patient with me. New to the Rpi b model & minera, not yet in hand yet. I read in the readme.md that "You can choose for a img file to put in your SD Card or for a manual install."
Example of Rpi & Minera:? Is minera basically like a mini OS and may be put on an SD card, bootup the Rpi just like a PC, and Rpi will boot to minera?
Thank you guys, cannot wait, right excited too try this out!
No it´s a Unix based Webserver with a PHP frontend. You can boot it and connect via Webbrowser from a PC to Minera, to controll it via Web Frontend via like a router firmware like ddwrt? I am guessing. Or like a routers webbrowser interface? Thanks. Webbrowser Interface, yes kind of like a router
|
|
|
|
dimfot
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 07:51:20 PM |
|
For those of us who only use the raspberry for minera, simple mod: nano /var/www/index.lighttpd.html add this line directly under the <head> (3rd line from top) ( modifying 127.0.0.1 to your ip address): this will push to the correct url in 1 sec. <META http-equiv="refresh" content="1; URL=http://127.0.0.1/minera"> how do i use this mod? where should i put it or run it? i'm using scripta only from web gui
|
|
|
|
chinatom
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 71
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 07:52:36 PM |
|
help. i usb pi (minera web) connect 10 pis g-blade(25mHASH) .. click Dashboard ...can't see any information ,
just~~
" I can't get the stats from your minerd. Please try to refresh the page or check your settings (minerd API must listen on 127.0.0.1:4028). "
in the page.
plz help me
when i used 4pic(8 blade), ti is ok . use 5 pic .. not ok. Yes, there is a problem getting the stats when there are so much chips/blades connected. Do you have the latest commit? Please try: cd /var/www/minera sudo git pull sudo ./upgrade_minera.sh
The retry to refresh the dashboard. i do it all(successful) and reboot system,but the same problem. 4 pis is ok . miningpool shows the minging hash is ok. I have same problem. I use 20 second delay for miner to start after reboot. You will find this option in control panel. Also make sure ur zone setup for RPI match the time shows in minera dashboard. HOW TO SYNC ZONE SETUP MATCH RPI. NOW I CAN'S SEE ANY DASHBOARD so i down konw the dashboard time. ... I don't think time zone is an issue. it run very good. but only pool can see the hashrate. hoho. plz help . minera ---michelem
|
|
|
|
michelem (OP)
Legendary
Offline
Activity: 1015
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 08:19:35 PM |
|
Minera 0.1.11 is outThanks to Sandor we have ON-THE-FLY pool selection! You will definitely love it! ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) * Updated CPUMiner with latest version * New Pools table with live pool data * ON-THE-FLY Pool selection (this is huge man:) * Second try fix large data from G-Blades (@chinatom update and retry) * Added submodule cpuminer-gc3355 on minera-bin/src/ Please more beer! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
fivejonnyfive
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 08:43:39 PM |
|
Minera 0.1.11 is outThanks to Sandor we have ON-THE-FLY pool selection! You will definitely love it! ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) * Updated CPUMiner with latest version * New Pools table with live pool data * ON-THE-FLY Pool selection (this is huge man:) * Second try fix large data from G-Blades (@chinatom update and retry) * Added submodule cpuminer-gc3355 on minera-bin/src/ Please more beer! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Damn that is awesome. Really quick to add pool switching! Have a beer on me! https://blockchain.info/tx/f9dc1a4d9fd84d931a04f1265c0a0ab9fc54558d659ee3b97f7f3f826d575f6e
|
|
|
|
michelem (OP)
Legendary
Offline
Activity: 1015
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 08:58:47 PM |
|
LOL you rock dude! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) PS A guy is telling me G-Blades issues should be fixed now, can someone confirm this? (@chinatom?) PPS If you have troubles with Minera, check you are not using IE as browser, IE is evil.
|
|
|
|
edonkey
Legendary
Offline
Activity: 1150
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 09:25:32 PM |
|
This is probably the only feature of Scripta that I miss now that I'm moving to Minera. Scripta shows not just a list of pools from the preferences, but a summary of the stats for each pool (accepts, rejects, etc). This way I can tell at a glance where my hash has been pointed. It's not unusual that my main pool will hiccup for a little while, which will result in some hash spillover to my secondary.
It's important for me to know that this has happened because my secondary unfortunately has no decent auto-payout options. I have to know that there's coin there to go pick it up. With Scripta I can tell at a glance that there's been activity on the secondary. With Minera, I guess I will have to periodically go look at the secondary pool.
It would be nice if Minera reported the actual pool that cpuminer is pointing at in real time. But it would be even more useful if the cpuminer API provides per pool stats that Minera could integrate into a summary display.
Thanks in advance to michelem and sandor111 for continuing to consider my continuous stream of demands. They have really done an awesome job with the Minera/cpuminer combo.
As per request, pool info has been added to the API. https://github.com/siklon/cpuminer-gc3355/commit/cbb59d70d6f3e2e721c9ef2f2baa085b6693cef1Wow Sandor111! You are amazing!
|
Was I helpful? BTC: 3G1Ubof5u8K9iJkM8We2f3amYZgGVdvpHr
|
|
|
n00bminer
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 104
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 09:38:54 PM |
|
For those of us who only use the raspberry for minera, simple mod: nano /var/www/index.lighttpd.html add this line directly under the <head> (3rd line from top) ( modifying 127.0.0.1 to your ip address): this will push to the correct url in 1 sec. <META http-equiv="refresh" content="1; URL=http://127.0.0.1/minera"> how do i use this mod? where should i put it or run it? i'm using scripta only from web gui It is only for Minera. The only thing it does is if you accidently call http://<ip> instead of http://<ip>/minera it automagically pushes you to the correct page. SSH into your raspberry and run the nano line. copy/paste the META line after changing the 127.0.0.1 to your <raspberry ip>
|
|
|
|
SilentH
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 65
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 09:53:53 PM |
|
Pool switching works as advertised!! You guys are incredible!
Thank you both very very much!
|
|
|
|
scryptminer
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 10:14:55 PM |
|
LOL you rock dude! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) PS A guy is telling me G-Blades issues should be fixed now, can someone confirm this? (@chinatom?) PPS If you have troubles with Minera, check you are not using IE as browser, IE is evil. New feature looks great. I can confirm on my side running on this raspi now 15 Blades it is not showing any Stats. I get still the same error I cant get the stats from your minered. Please refresh ... minired API must listen on... this is my startup code: /usr/bin/screen -dmS cpuminer /var/www/minera/minera-bin/minerd --gc3355-detect --freq=825 --api-port=4028 --gc3355-chips=40 --log /var/log/minera/cpuminer.log -o stratum+tcp://ltc.ghash.io:3333 -u masterchief.1 -p x -o stratum+tcp://pool.netcoinfoundation.org:3334 -u masterchief.1 -p x
|
|
|
|
unamis76
Legendary
Offline
Activity: 1512
Merit: 1012
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 10:52:12 PM |
|
Anyone trying to mine at BetaRigs with this distro? Keep getting this error: stratum_recv_line failed when trying either of these two pools: stratum+tcp://r3026.g63.rigs.eu.betarigs.com:6192 http://eu.betarigs.com:3333No shares attempted at all... These work just fine in my cgminer instances, but this is the first time I've used cpuminer. EDIT: I enabled debug mode, but it didn't give me much more info... https://i.imgur.com/qOENVdR.pngIs your rig rented out when this happens? Mine will do that as well when the rig is not rented. Once someone rents it, the pool becomes alive and cpuminer switches over to it after a few minutes. Yes, it is. EDIT: Would you mind posting your config file? Maybe there's some small difference... Sure, here it is, very basic { "gc3355-detect": true, "freq": "1200", "log": "\/var\/log\/minera\/cpuminer.log", "debug": true, "pools": [ { "url": "stratum+tcp:\/\/r3753.g90.rigs.eu.betarigs.com:6801", "user": "toxic0n", "pass": "x" }, { "url": "stratum+tcp:\/\/stratum.nicehash.com:3333", "user": "1ToxicssQH8c8v2XZKboryudYrvPy775z", "pass": "p=3.3" }, { "url": "stratum+tcp:\/\/uswest.wafflepool.com:3333", "user": "1ToxicssQH8c8v2XZKboryudYrvPy775z", "pass": "x" }, { "url": "stratum+tcp:\/\/sf.clevermining.com:3333", "user": "1ToxicssQH8c8v2XZKboryudYrvPy775z", "pass": "x" } ] } Having a similar problem, but with Hashcows. No errors on my config, also a very simple file. Any workaround?
|
|
|
|
ircactus
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2014, 12:02:26 AM |
|
Can I throw my hat into the possibility of adding more pools to the list? Currently at 4.
|
|
|
|
azzman372
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2014, 12:04:40 AM |
|
Wow amazing work to both sandor and michelem! The live pool stats and switching is awesome =D
|
|
|
|
|