Claymore's CryptoNote AMD GPU Miner v11.3

[cryptouse]

is there any chance to add nvidia support ?

[SchuerfImperium]

is there any chance to add nvidia support ?

i hope it also...xmr give better profits then eth at the moment...we need better support for this miner actually....

[bdon22]

Miner shuts down shortly after starting up with this header:

12:58:22:515   f38   
12:58:22:520   f38   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
12:58:22:525   f38   º            Claymore CryptoNote GPU Miner  v9.7 Beta            º
12:58:22:530   f38   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Windows 10 64-bit, AMD RX 580 on 17.4.4 drivers. Also could not get it to work using latest AMD beta blockchain drivers. Also tried on a different PC with RX 570, same OS, same issue.

I get the error "nsgcpucnminer.exe has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."

I have also tried running directly from command prompt in administrator mode, no luck.

start.bat:

NsGpuCNMiner.exe -o ssl://xmr-us-east1.nanopool.org:14433 -u moneroaddress.worker/email@email.com -p z -ftime 1

config.txt:

-o ssl://xmr-us-east1.nanopool.org:14433 -u moneroaddress.worker/email@email.com -p z -ftime 1

epools.txt:

POOL: xmr-eu1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-eu2.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-us-east1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-us-west1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-asia1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0

Any help would be appreciated.

[notbatman]

Here's a cryptonote hardware mining comparison schedule for 93 AMD cards plus a few NVIDIAs. -- https://docs.google.com/spreadsheets/d/t_usoLpWsHq7K6-PeYXigCw/htmlview

[notbatman]

Miner shuts down shortly after starting up with this header:

12:58:22:515   f38   
12:58:22:520   f38   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
12:58:22:525   f38   º            Claymore CryptoNote GPU Miner  v9.7 Beta            º
12:58:22:530   f38   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Windows 10 64-bit, AMD RX 580 on 17.4.4 drivers. Also could not get it to work using latest AMD beta blockchain drivers. Also tried on a different PC with RX 570, same OS, same issue.

I get the error "nsgcpucnminer.exe has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."

I have also tried running directly from command prompt in administrator mode, no luck.

start.bat:

NsGpuCNMiner.exe -o ssl://xmr-us-east1.nanopool.org:14433 -u moneroaddress.worker/email@email.com -p z -ftime 1

config.txt:

-o ssl://xmr-us-east1.nanopool.org:14433 -u moneroaddress.worker/email@email.com -p z -ftime 1

epools.txt:

POOL: xmr-eu1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-eu2.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-us-east1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-us-west1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-asia1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0

Any help would be appreciated.

This might work:

xmr.bat

Code:

@echo off

setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe -tt 30 -mport 0 -allpools 1 -o stratum+tcp://127.0.0.1:1234 -u user.worker -p x

pause

[Ursul0]

and we are back here with the recent XMR jump
Any chance of proper miner update?
one of the sgminer's forks - gatelessgate does it for me smoother and faster (105W + 710h from 470 4gb)

[osnwt]

Linux!!! Linux!!!

[yslyung]

on win10 beta drivers from amd claymore v9.7 everything works well except miner not showing gpu temps & fan speed. works well with latest ethman v3.4

[it5d0n3d3al]

Hey guys, 
What about this:

Share rejected (266 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}

Normal mining but sometimes show this error. 

I get this error too. I tried running all the different -a 0, -a 1, -a 2, -a 3, and -a 4 commands but still coming up.

Driving me nuts. When does Claymore Cryptonote start support the RX 580 series?

[usefree]

on win10 beta drivers from amd claymore v9.7 everything works well except miner not showing gpu temps & fan speed. works well with latest ethman v3.4

and what is happening with fans? does they work? and how they are controlled in order the temperature of the cards not to pass 70 degree?
I have 480 cards with customized bios from 580 on board and claymore for cryptonight 9.7 work. All, but fan control..

[Arska]

Whats up with fans starting to spin 100 % without a reason with these XMR miners for random cards with random interval? Same problem with Wolf0s miner. I'm using afterburner for fan control and none of the miner settings. When the fan speed goes crazy it overrides any afterburner control over them and I have to restart the rig to reset the fan speeds.

[Ursul0]

Clay please FAN!

NO FAN  in DRIVER BETA AMD 4xx and 5xx

Thanks

1) you can roll back to 16.11.4 (no bios sig validation)
EDIT: the new blockchain beta drivers use new API, which is not something this miner supports
2) if you'll be still having some issues, try to set -mclock and -cclock in claymore - it may do so,ething that will start showing temps/fans

[Ursul0]

Whats up with fans starting to spin 100 % without a reason with these XMR miners for random cards with random interval? Same problem with Wolf0s miner. I'm using afterburner for fan control and none of the miner settings. When the fan speed goes crazy it overrides any afterburner control over them and I have to restart the rig to reset the fan speeds.

do DDU and use 16.11.4 driver. it will fix the accidental 100% fan issue. was having a lot of those last year on other driver versions.
Also you may try sgminer forks for better cryptonote results

[doktor83]

with eth bios and clocks (that means lower gpu clock) i get 780-790 h/s @ 90w from wall with 470 4gb.
So you guys are obviously doing something wrong.

[notbatman]

with eth bios and clocks (that means lower gpu clock) i get 780-790 h/s @ 90w from wall with 470 4gb.
So you guys are obviously doing something wrong.

Are these numbers from wolf's miner on Ubuntu? "eth bios and clocks" that makes no sense? My RX460 is running at stock speeds, the clock settings in the conf file do nothing.


edit:
Claymore's miner doesn't run under wine, he hasn't provided Linux binaries and my windows computer main board pcie slots are currently fried so I've got no way to currently test his miner. If I recall I think I got 416 H/s but it was this testing that got my windows mainboard fried when I plugged in an extra long HD7970 and the DVI pinout touched the metal case.

[notbatman]

with eth bios and clocks (that means lower gpu clock) i get 780-790 h/s @ 90w from wall with 470 4gb.
So you guys are obviously doing something wrong.

Are these numbers from wolf's miner on Ubuntu? "eth bios and clocks" that makes no sense? My RX460 is running at stock speeds, the clock settings in the conf file do nothing.

Using Windows and shitty "blockchain" drivers?

I'm using your miner 0.4 on Ubuntu 16.04 with the latest amdgpu-pro driver. I want to see a screenshot 790 H/s on Polaris 11 or it didn't happen.

[notbatman]

I'm not paying Microsoft $160 for windows if it can't handle multi gpu systems.

[doktor83]

with eth bios and clocks (that means lower gpu clock) i get 780-790 h/s @ 90w from wall with 470 4gb.
So you guys are obviously doing something wrong.

Are these numbers from wolf's miner on Ubuntu? "eth bios and clocks" that makes no sense? My RX460 is running at stock speeds, the clock settings in the conf file do nothing.


edit:
Claymore's miner doesn't run under wine, he hasn't provided Linux binaries and my windows computer main board pcie slots are currently fried so I've got no way to currently test his miner. If I recall I think I got 416 H/s but it was this testing that got my windows mainboard fried when I plugged in an extra long HD7970 and the DVI pinout touched the metal case.

sgminer, windows and 470, not 460.

It can do close to 900h/s when using the correct timings/clocks.
And by "eth bios and clocks" i mean using a bios that has timings and gpu/mem clocks adjusted for ETH mining, not for XMR.

[notbatman]

with eth bios and clocks (that means lower gpu clock) i get 780-790 h/s @ 90w from wall with 470 4gb.
So you guys are obviously doing something wrong.

Are these numbers from wolf's miner on Ubuntu? "eth bios and clocks" that makes no sense? My RX460 is running at stock speeds, the clock settings in the conf file do nothing.

Using Windows and shitty "blockchain" drivers?

I'm using your miner 0.4 on Ubuntu 16.04 with the latest amdgpu-pro driver. I want to see a screenshot 790 H/s on Polaris 11 or it didn't happen.

He said 470 4G, that would be Polaris 10, IIRC. And I've gotten higher, so I really don't doubt him.

OHHH 470, sorry I missed that. heh

[notbatman]

Wait so me getting 416 H/s on ploaris 11 on claymore/windows with whatever drivers windows automatically installed is actually blazing fast then.

My only question now is how is he using only 90W on ploaris 10? Is cryptonote just energy efficient?



edit:

I'm happy with 630 H/s on my RX480s, the Gigabyte mainboards on my rigs are the cheapest/slowest ever this is normal.