Claymore's CryptoNote AMD GPU Miner v11.3

[ocminer]

Hey Claymore,

can you integrate usernames instead of only allowing -u WALLET ?

I've got a pool up:

https://xmr.suprnova.cc

and people would like to mine with your miner, but it seems it doesn't support -u suprnova.1 for example

[jjiimm_64]

Hey Claymore,

can you integrate usernames instead of only allowing -u WALLET ?

I've got a pool up:

https://xmr.suprnova.cc

and people would like to mine with your miner, but it seems it doesn't support -u suprnova.1 for example

THIS:   needed for MRR too:  https://bitcointalk.org/index.php?topic=638915.msg16440489#msg16440489

[Claymore]

Hey Claymore,

can you integrate usernames instead of only allowing -u WALLET ?

I've got a pool up:

https://xmr.suprnova.cc

and people would like to mine with your miner, but it seems it doesn't support -u suprnova.1 for example

I need to change devfee system for this miner to support all pools, it takes some time, also I'm working on Linux version, so be patient please, I think it will be done in a week.

[jjiimm_64]

Hey Claymore,

can you integrate usernames instead of only allowing -u WALLET ?

I've got a pool up:

https://xmr.suprnova.cc

and people would like to mine with your miner, but it seems it doesn't support -u suprnova.1 for example

I need to change devfee system for this miner to support all pools, it takes some time, also I'm working on Linux version, so be patient please, I think it will be done in a week.

thank you sir.

[EvilC0P]

General question about pool and hash rates.

How come i see on the pool's website my hash rate between 2 to 3kh/sec
when i know that i generate at least 3.5 kh/s ( 5 x RX 480 (~650 h/s each + ~230 for my i7 cpu + ~100 for an other cpu )

is it because the pool is not stable/efficient or is it lag/packet loss causing this discrepancy?

[jjiimm_64]

General question about pool and hash rates.

How come i see on the pool's website my hash rate between 2 to 3kh/sec
when i know that i generate at least 3.5 kh/s ( 5 x RX 480 (~650 h/s each + ~230 for my i7 cpu + ~100 for an other cpu )

is it because the pool is not stable/efficient or is it lag/packet loss causing this discrepancy?

i think it is because they can only estimate your hashrate by the success shares. 

[EvilC0P]

General question about pool and hash rates.

How come i see on the pool's website my hash rate between 2 to 3kh/sec
when i know that i generate at least 3.5 kh/s ( 5 x RX 480 (~650 h/s each + ~230 for my i7 cpu + ~100 for an other cpu )

is it because the pool is not stable/efficient or is it lag/packet loss causing this discrepancy?

i think it is because they can only estimate your hashrate by the success shares. 

I am wondering, do you think I would i get different result using a different pool? or it wouldn't matter, i would get the same result

[ansi]

Does this work on Windows XP SP 3 ?

[paramind22]

What do you do if it uses 100% CPU?  Is there a way to change that?  I have it on low priority in Task Manager.  I have 6 megs of Ram and a ACPI x64-based PC, AMD radeon 6410. 

[citronick]

Does this work on Windows XP SP 3 ?

as long as 64bit Windows OS -- it should install.... however, good luck getting AMD drivers for XP

[ronald0cz]

Does this work on Windows XP SP 3 ?

I have tried it at my old computer with Windows XP and miner doesn't work for me.

[XMR-Miner]

Is it typical for all RX 400 series cards to mine XMR with a maximum hash rate of ~550 h/s stock like with my 470 & 480 cards and the same experiences of someone with similar results on the previous page?   When is it planned for this miner to take advantage of these new RADEON GPUs and Catalyst?  At least this and ccminer work with the new GPUs; I was using Minergate, but it's GPU miner crashes on RX 400s and GTX 1000s.  It's awesome that Claymore is coding a Linux version as I'm building a miner/server with 8 GPUs, 2 CPUs (20 core, 40 hyperthread, E5-2630 v4) and I'll be using both of Claymore's CPU & GPU miners.

[Bakery]

I could get 620mh with 4gb rx 470 and 750mh with 8gb rx 470 both sapphire nitros

[teosanru]

hello, I want to know what would be the commands to mine aeon GPU,
I tried to make a bat, I'm atualmente minergate:
NsGpuCNMiner, or stratum + tcp: //aeon.pool.minergate.com: 45690 my email -u -p x

but it does not work presents claymore error as a result null = Invalid shares:415

I would also like to know the steps for mining etherum dual-xmr with claymore 9.6
gpu rx 480 for 8gb

[XMR-Miner]

I could get 620mh with 4gb rx 470 and 750mh with 8gb rx 470 both sapphire nitros

With an RX 480 Sapphire Nitro+ OC 8gb stock-settings mining XMR I get 645 h/s; I took recommendations from the Eth. board and overclocked memory by 200, reduced Voltage by 48 which resulted in a stable 724 h/s, 'good enough.  Well, perhaps the newest GPUs (Pascal GTX 1000s and Polaris RX 400s) and their drivers are in line for mining software optimization by some crafty programmer.

[Lafu]

hello, I want to know what would be the commands to mine aeon GPU,
I tried to make a bat, I'm atualmente minergate:
NsGpuCNMiner, or stratum + tcp: //aeon.pool.minergate.com: 45690 my email -u -p x

but it does not work presents claymore error as a result null = Invalid shares:415

I would also like to know the steps for mining etherum dual-xmr with claymore 9.6
gpu rx 480 for 8gb

FIRST aeon is cryptonite light algo dosent work with this miner second have you ever Read the readme.txt file in your miner foulder?  when not, do it! 

[Lafu]

I could get 620mh with 4gb rx 470 and 750mh with 8gb rx 470 both sapphire nitros

You mean kh/s not mh/s i think

[XMR-Miner]

I could get 620mh with 4gb rx 470 and 750mh with 8gb rx 470 both sapphire nitros

You mean kh/s not mh/s i think

I was guessing h/s.

[XMR-Miner]

What causes 'Invalid Share' to be sent to my mining pool?  I have a few so far.  They deduct some from my total when it happens, so I want to prevent or reduce it as much as possible.
[UPDATE] I researched this problem and it is usually overclocking errors or bugs in mining software; others have posted that this miner may send them, though typically only when combined with certain GPUs.

[jjiimm_64]

@ claymore.

still looking for version that does not test the xmr address upon start, any update?


note:  still the most stable miner i have had since btc:

all rigs very stable, this rig is two 290x's

Code:

6-07:35:29 - SHARE FOUND (target 150000) - (GPU 1 of 2)
6-07:35:37 - SHARE FOUND (target 150000) - (GPU 0 of 2)
6-07:35:49 - New job received from monerohash.com:3333
1380 h/s, TotalHashes: 5261846K, DevHashes: 131545K Mining time: 1079:49

this one is 3 7970's

Code:

DevFee: 10/13/16-07:35:22 - SHARE FOUND (target 5291) - (GPU 2 of 3)
10/13/16-07:36:20 - New job received from monerohash.com:3333
Speed: 1438 h/s, TotalHashes: 5483912K, DevHashes: 137097K Mining time: 1079:50

Anyone else have more then 1080 hours??
JIm