Claymore's CryptoNote AMD GPU Miner v11.3

[ecohash]

Claymore pls add other assress suportt. Or dont check address at start: XMR/QCN/BCN/FCN/Aeon/Duck/Dash/OEC/MCN/ORION addresses are supported only. When i am trying to mine other CN coin...

Regards

[yuslav]

I have two farms on RX480 crash on XMR. Too bad that is not overloaded, but just no image or shut down.

maybe you have a to high oc ? did you try it with stock ?

Without acceleration. It's only on the XMR. ETH & ZEC everything is fine!

[ps_jb]

Without acceleration. It's only on the XMR. ETH & ZEC everything is fine!

Same here. Win 10 RX 480 Nitro+

Starts to hash with 735 H/s. In a 1 minute there is a standard Windows message that program will be closed. Actually if you will not press "Close" it will continue mining for couple of hours, but eventually will stop and crash the rig

[mo35]

Without acceleration. It's only on the XMR. ETH & ZEC everything is fine!

Same here. Win 10 RX 480 Nitro+

Starts to hash with 735 H/s. In a 1 minute there is a standard Windows message that program will be closed. Actually if you will not press "Close" it will continue mining for couple of hours, but eventually will stop and crash the rig

same on win7 with rx480 nitro+

[maxmad_x]

@Claymore,

Is there any ETA on VEGA or POLARIS optimized XMR miner soon?
Thank you

[Hotmetal]

@Claymore,

Is there any ETA on VEGA or POLARIS optimized XMR miner soon?
Thank you

Is a size 13 font with bold really needed? He already stated a few pages back that he will get to it when he has time (he is finishing up on a few ZEC and ETH things)

[Claymore]

No ETA, sorry. I will do it as soon as I can, but firstly I need to update dual miner. Also don't forget about holidays

[Hotmetal]

No ETA, sorry. I will do it as soon as I can, but firstly I need to update dual miner. Also don't forget about holidays

Thank you. We'll wait patiently

[Tbone5660]

@Claymore Any room for speed improvements on the Dual Miner for ETH?

[yuslav]

No ETA, sorry. I will do it as soon as I can, but firstly I need to update dual miner. Also don't forget about holidays

Miners have no holidays(( have pity on us! Dual miner was recently updated and we want a lot of Monero!!!!!   

Have a good new year!

[maxmad_x]

No ETA, sorry. I will do it as soon as I can, but firstly I need to update dual miner. Also don't forget about holidays

Thanx for update Sir,
Just wanted to get some attentions! Thats why bold and font ... Sorry

What are the dual miner updates? It has been working really well since quite some time. Will be great to know the prospective updates

Have a great vacation and Happy holidays/Christmas

[bhanu545]

Hey fuys, i am not even getting 700hashes with 4gb rx 470, 480.
Can anyone suggest which bios or memory straps to use to get more hash?

[pehoko]

Why this miner is working for dev most of time?

Quote from: pehoko on December 20, 2016, 08:12:56 PM
Why this miner is working for dev most of time?
I haven't saw "nofee" option ... all good now.

This question has been answered before. The difficulty level of the dev fee is lower so there's more accepted shares, but they are worth less.
The difficulty of your own shares is higher, so they are worth more, so you get paid more but you need to have less accepted shares.

Hotmetal is absolutely correct. Just watching the miner results window can be deceiving so ignore that. If you read the readme file, you will see that enabling the nofee option will reduce your speed by 5%, so what you have done is not only cut Claymore out of the fee he deserves and you are netting 2.5% less overall, so a lose-lose situation.

Well I am newbie in monero mining but I have some kind of feeling that connecting/disconnecting to other pools eats my own shares anyway.

[bhanu545]

No ETA, sorry. I will do it as soon as I can, but firstly I need to update dual miner. Also don't forget about holidays

Hey fuys, i am not even getting 700hashes with 4gb rx 470, 480.
Can anyone suggest which bios or memory straps to use to get more hash?

Claymore can you reply to my question please?

[GabryRox]

No ETA, sorry. I will do it as soon as I can, but firstly I need to update dual miner. Also don't forget about holidays

Hey fuys, i am not even getting 700hashes with 4gb rx 470, 480.
Can anyone suggest which bios or memory straps to use to get more hash?

Claymore can you reply to my question please?

Firstly, I don't think it's Claymore's responsibility to field your bios modding questions. If you have an issue with errors for functionality in his miner then sure, ask him.

Also, your question is worded quite vaguely so it's hard for anyone to provide truly meaningful advice.  For instance, you say your are "not even getting 700 H/s with 4BG 470/480s".  OK... that could mean that you are getting 690 with a 470, which is actually about the top I have seen being reported (confirmed), including myself, and that is indeed with the 1500 memory strap bios mod.

Generally, 470's will get about 570-580 un-modded and around 690 after that strap-mod. I have 1 rig in each case, and that is almost exactly what my 470's are getting under both scenarios. Granted, 480's should probably do a bit better than that but not my much.

If you have not modded your GPU's bios yet, you simply need to google or search this forum for your exact card brand and model, as this can make a big difference and if you mod it with the wrong one you will likely brick it.

[Hotmetal]

Generally, 470's will get about 570-580 un-modded and around 690 after that strap-mod.
I have 1 rig in each case, and that is almost exactly what my 470's are getting under both scenarios. Granted, 480's should probably do a bit better than that but not my much.

Are you sure about that?

RX480's : GPU0 788 h/s, GPU1 783 h/s, GPU2 791 h/s, GPU3 786 h/s, GPU4 789 h/s

That's around 100 h/s more than your 470's.

[phung330]

Generally, 470's will get about 570-580 un-modded and around 690 after that strap-mod.
I have 1 rig in each case, and that is almost exactly what my 470's are getting under both scenarios. Granted, 480's should probably do a bit better than that but not my much.

Are you sure about that?

RX480's : GPU0 788 h/s, GPU1 783 h/s, GPU2 791 h/s, GPU3 786 h/s, GPU4 789 h/s

That's around 100 h/s more than your 470's.

My speed here: 6 card RX 470 and 6 card RX 480
https://uphinhnhanh.com/images/2016/12/24/1f8734.png
https://uphinhnhanh.com/images/2016/12/24/2730dd.png

[Ned Kelly]

Generally, 470's will get about 570-580 un-modded and around 690 after that strap-mod.
I have 1 rig in each case, and that is almost exactly what my 470's are getting under both scenarios. Granted, 480's should probably do a bit better than that but not my much.

Are you sure about that?

RX480's : GPU0 788 h/s, GPU1 783 h/s, GPU2 791 h/s, GPU3 786 h/s, GPU4 789 h/s

That's around 100 h/s more than your 470's.

My speed here: 6 card RX 470 and 6 card RX 480
https://uphinhnhanh.com/images/2016/12/24/1f8734.png
https://uphinhnhanh.com/images/2016/12/24/2730dd.png

What power consumption do you have? (At the wall)

[HerrDirektor]

Guys, what drivers you use on Polaris?
I have 4 RX480 cards.
After starting GPU0 showing 790-800 hashes (normal work), the other cards - 400-500 hashes only (sometimes 180-200!).
If the test each card separately (one in motherboard), all cards work fine (790-800).

I tired on\off HT and CrossFire - not avail.

Used drivers: 16.11.4, 16.11.5, 16.12.1, 16.12.2
Used CPU - i5 4670 on Z87, xeon x5650 on x58, i7 on Z97.

WTF???

PS.

On other Claymore miners - ZEC\ETH\DUAL  all cards in rig work perfectly, without any problem

[bhanu545]

No ETA, sorry. I will do it as soon as I can, but firstly I need to update dual miner. Also don't forget about holidays

Hey fuys, i am not even getting 700hashes with 4gb rx 470, 480.
Can anyone suggest which bios or memory straps to use to get more hash?

Claymore can you reply to my question please?

Firstly, I don't think it's Claymore's responsibility to field your bios modding questions. If you have an issue with errors for functionality in his miner then sure, ask him.

Also, your question is worded quite vaguely so it's hard for anyone to provide truly meaningful advice.  For instance, you say your are "not even getting 700 H/s with 4BG 470/480s".  OK... that could mean that you are getting 690 with a 470, which is actually about the top I have seen being reported (confirmed), including myself, and that is indeed with the 1500 memory strap bios mod.

Generally, 470's will get about 570-580 un-modded and around 690 after that strap-mod. I have 1 rig in each case, and that is almost exactly what my 470's are getting under both scenarios. Granted, 480's should probably do a bit better than that but not my much.

If you have not modded your GPU's bios yet, you simply need to google or search this forum for your exact card brand and model, as this can make a big difference and if you mod it with the wrong one you will likely brick it.

If you see the posts below after yours, you can see some of them are getting more than 700h/s and 780h/s with a rx 480. So may be its you and people like me are not getting more than 690.
By the way my cards bios are modded.