Claymore's CryptoNote AMD GPU Miner v11.3

[fr4nkthetank]

About that molex thing....I have just one H97 that demands it at boot, and others that do not.  doesnt change anything to have one molex connector on it, as far as I can tell, it doesnt really draw much power at all.  Been running over a year like this, no problemo.

[faaty]

is it wise to mine xmr with a r9 380 nitro 4gb gpu?

[imtav]

I´m using an Asrock H81M. Both 5V Power Plugs are connected..

1) Asrock H81M is a miniATX board, and has only two PCIe slots, so no, that is not the board that you are using. What you have could be the Asrock H81 ProBTC or Asrock H81 ProBTC V2
2) Those arent 5V plugs, they are molex power plugs which can draw upto 12V. And you should not have them plugged in when using RX 470/480 cards.
3) Again, go through the forum threads, every answer you need already exists there. Please have the patience to read through hundreds of pages and try 10's of settings, we all did it.

Yes, sure, you are right. H81 BTC Pro 2.0. And in the documentation was a comment, when using more then 3 Video Cards, you have to plugg in at min, one Molex Power connector, but better both. So i thought, i have to.
Please believe me. I´m doing nothing else, then reading. I´m sick at home and i´ve a lot of time.But i also have a lot of qustions..
But you gave me hope, that there is a solution for my issue:-)

Regards,
Rosi

Are u using powered usb risers?
If you are please UNPLUG the 4-pin connector that goes from your PSU to your mobo before u fry anything...

If you are NOT using powered usb risers then ok keep the 4-pin molex in

He's not going to - please stop giving bad advice. Powered USB risers are cut - they don't connect the power from the mobo to the GPU.

That's not what i said
I never said he will fry the GPU
But he CAN fry the risers

Using an Asrock h81 pro btc with powered risers PLUS 4-pin molex connectors is an overkill

Giving too much power to the mobo (main mobo cable plus 4-pin molex) when it's not needed is not good

You HAVE to give the mobo that 4-pin, or it won't work with all PCI-E slots filled. Plus, having the extra power is NOT going to fry the risers. Power doesn't work like that.

OK then i will TAKE A PHOTO of ALL my rigs that have x6 GPU's (ALL 6 PCI-E slots filled) mainly 480's (i have other setups also) WITHOUT any molex 4-pin connected that work perfectly for months
and post it here...(after i get home that is)

PS. I am using ethOS but Windows 10 works as good without problems

Where are those pics? Some of us want to see

[kiaas]

am I missing something or did he stop releasing linux versions after 9.1?

[pikachuy]

You HAVE to give the mobo that 4-pin, or it won't work with all PCI-E slots filled. Plus, having the extra power is NOT going to fry the risers. Power doesn't work like that.

OK then i will TAKE A PHOTO of ALL my rigs that have x6 GPU's (ALL 6 PCI-E slots filled) mainly 480's (i have other setups also) WITHOUT any molex 4-pin connected that work perfectly for months
and post it here...(after i get home that is)

PS. I am using ethOS but Windows 10 works as good without problems

Where are those pics? Some of us want to see

Here are some pics of my rig with 7 GPU's regarding the molex debate, you can see my rig and no molex connected to the motherboard (Asrock H81 Pro BTC) and no molex visible in the pics:

https://bitcointalk.org/index.php?topic=1851487.0

Only thing I remember doing was updated the motherboard firmware to 2.30 and changing PCIE to gen1 and it boots up perfectly fine everytime.

[Demarsac]

I´m using an Asrock H81M. Both 5V Power Plugs are connected..

1) Asrock H81M is a miniATX board, and has only two PCIe slots, so no, that is not the board that you are using. What you have could be the Asrock H81 ProBTC or Asrock H81 ProBTC V2
2) Those arent 5V plugs, they are molex power plugs which can draw upto 12V. And you should not have them plugged in when using RX 470/480 cards.
3) Again, go through the forum threads, every answer you need already exists there. Please have the patience to read through hundreds of pages and try 10's of settings, we all did it.

Yes, sure, you are right. H81 BTC Pro 2.0. And in the documentation was a comment, when using more then 3 Video Cards, you have to plugg in at min, one Molex Power connector, but better both. So i thought, i have to.
Please believe me. I´m doing nothing else, then reading. I´m sick at home and i´ve a lot of time.But i also have a lot of qustions..
But you gave me hope, that there is a solution for my issue:-)

Regards,
Rosi

Are u using powered usb risers?
If you are please UNPLUG the 4-pin connector that goes from your PSU to your mobo before u fry anything...

If you are NOT using powered usb risers then ok keep the 4-pin molex in

He's not going to - please stop giving bad advice. Powered USB risers are cut - they don't connect the power from the mobo to the GPU.

That's not what i said
I never said he will fry the GPU
But he CAN fry the risers

Using an Asrock h81 pro btc with powered risers PLUS 4-pin molex connectors is an overkill

Giving too much power to the mobo (main mobo cable plus 4-pin molex) when it's not needed is not good

You HAVE to give the mobo that 4-pin, or it won't work with all PCI-E slots filled. Plus, having the extra power is NOT going to fry the risers. Power doesn't work like that.

OK then i will TAKE A PHOTO of ALL my rigs that have x6 GPU's (ALL 6 PCI-E slots filled) mainly 480's (i have other setups also) WITHOUT any molex 4-pin connected that work perfectly for months
and post it here...(after i get home that is)

PS. I am using ethOS but Windows 10 works as good without problems

Where are those pics? Some of us want to see

Sorry I forgot to post the photos
Why would anyone lie for something like this? What motive would I have?

ANYWAY

Here is a video I JUST took
You have 1 week from the moment I post this to check it out, after a week it gets deleted

https://we.tl/hgmeFpSCMJ

Let me know your thoughts...

[Era_666]

Sorry, I did not find anything about here.
Does the latest version of your Miner work witg AMD RX470 and co?
thx.

Ps. if some one speaks german here, it would be nice if he/she could answer me some questions in german.
thx too.

[GPUM1ner]

My H97 won't start unless I have the MOLEX connected. Never seen that before but this is a brand new rig.
Having some random shutting down though.

My H81 BTC-PRO v1 doesn't need anything connected.

[BrunoS]

Sorry, I did not find anything about here.
Does the latest version of your Miner work witg AMD RX470 and co?
thx.

Ps. if some one speaks german here, it would be nice if he/she could answer me some questions in german.
thx too.

Letzte Version (9.7) arbeitet sehr gut mit den Karten 470 und 480

[Praesidiarius]

am I missing something or did he stop releasing linux versions after 9.1?

same for me - i dont find any newer version than 9.1 for linux - anyone can help?

[farsky]

Guys... Claymore.. why this happens
(With connection all is normal)

[galaxy5user]

Tried to run the latest (?) version 9.7 of  Claymore's CryptoNote GPU Miner on Windows 7. The error I got is:

Cards available: 0
No cards in the list!

clinfo also lists no cards.
I have RX 480 with Crimson-16.9.1 driver, no overclocking. Can it be related to the fact that I have the display connected to another card (with D-Sub VGA output)?

[carlo_0000]

maybe  you have to change a command ligne  something like  -gpuplatform 1
don't remember exactly what it is

[galaxy5user]

am I missing something or did he stop releasing linux versions after 9.1?

same for me - i dont find any newer version than 9.1 for linux - anyone can help?

This is because he was too greedy to buy a secure online sources files storage. He said he lost the sources because of HDD crash.

[kiaas]

am I missing something or did he stop releasing linux versions after 9.1?

same for me - i dont find any newer version than 9.1 for linux - anyone can help?

This is because he was too greedy to buy a secure online sources files storage. He said he lost the sources because of HDD crash.

you've got to be kidding.. and he wasn't able to go redo his linux code from what's shared with the windows software?

[Blisk]

soure it is too bad this miner doesn't support ati graphics seris 5000 and 6000, they are old ati video cards but soure much faster than CPU

[UnclWish]

soure it is too bad this miner doesn't support ati graphics seris 5000 and 6000, they are old ati video cards but soure much faster than CPU

...
This version is for recent AMD videocards only: 7xxx and 2xx, also 6xxx and 5xxx. No nVidia support.
This version is for Windows x64 only. No 32-bit support.
...

If you use 64-bit system 6xxx and 5xxx must work. Don't forget to install latest amd drivers for your system/cards.

[Bare]

soure it is too bad this miner doesn't support ati graphics seris 5000 and 6000, they are old ati video cards but soure much faster than CPU

I'm mining with ati 5970 and it works flawlessly... on win7 x64 and last compatible drivers for 5970

[monetka2017]

The rx 570 graphics card is defined as rx 470.
Gpu-z writes radeon rx 570 gaming x 4g msi
Driver Crimson 17.4.3)
Gpu clock 1281
Memory 1750 (ddr5 hynix)
Speed ​​575-580 h / s

Is this the limit? Or can you increase the speed?

[UnclWish]

The rx 570 graphics card is defined as rx 470.
Gpu-z writes radeon rx 570 gaming x 4g msi
Driver Crimson 17.4.3)
Gpu clock 1281
Memory 1750 (ddr5 hynix)
Speed ​​575-580 h / s

Is this the limit? Or can you increase the speed?

Try to overclock memory so as for ethereum. And use modded bios with shifted memory timings.