HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
|
July 22, 2014, 12:41:27 PM |
|
4 units (batch 1, first ~15min) arrived today and setup was a breeze.
gorgeous case, makes it feel like a solid consumer-grade product compared to the S1.
miner 1: 237.5MHz 477GH (2.5hrs) miner 2: 225MHz 417GH (2hrs) miner 3: 225MHz 450GH (2hrs) miner 2: 225MHz 413GH (2hrs)
so far overclocking is a total grab-bag. looks like 2 of the miners lose hashrate at even a slight overclock, and the other has negligible improvement over stock. miner 1 will go for 250mhz tomorrow
I havent seen the invoice yet, but presumably it was about $400 CAD to import and receive all 4 miners.
$400?!? I just spoke with UPS and they told me my shipment (qty 4) was going to be ~$109? That is, if they ever get here. I wonder if the person I spoke with read it wrong - maybe $109 ea? You pay only the TPS. 5% of declared value.
|
|
|
|
doig90
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 22, 2014, 12:56:59 PM |
|
Does anyone know what the UK Customs cost is for a Antminer s3?
|
|
|
|
vulgartrendkill
|
|
July 22, 2014, 01:00:20 PM |
|
Does anyone know what the UK Customs cost is for a Antminer s3?
I paid £61 per miner. I believe this included UPS's 10 quid fee for fronting the VAT in the first place.
|
|
|
|
aigeezer
Legendary
Offline
Activity: 1450
Merit: 1013
Cryptanalyst castrated by his government, 1952
|
|
July 22, 2014, 01:00:34 PM |
|
First time BM purchaser! Got my 8 S3s today, 7 run like champs around 441ish, although I have one that has a massive 25% HW errors, hashing at about 60-65% of what it should be doing. Any ideas? http://s15.postimg.org/rfrh5roc9/S3limp.jpgI'll suggest to flash firmware (without preserving settings) from bitmaintech webpage and see how it goes ... So the firmware on the website is an update to what is already on the system? For me it was. One of my units had a wrong firmware from factory and start working as advertised after I installed the firmware. If you look closely to dimaze image you will notice that it show a non-zero value for BestShare but the S3 firmware show 0 all the time for BestShare so I guess he may have same issue that can be easily fixed by flashing the firmware without preserving settings. Interesting. The only firmware I see on the site is labelled "antMiner_S320140711.bin first version of firmware for antminer S3", which presumably is what we all have so far unless pre-release versions slip through sometimes. I'm hoping an update will quiet the beeping more than my felt patch has, so I keep looking for firmware updates. My dog is completely freaked by the beeps, even now that they are muffled.
|
|
|
|
Trademan1
Member
Offline
Activity: 84
Merit: 10
|
|
July 22, 2014, 01:02:55 PM |
|
What was that website selling server power supplies with PCI-e outputs? Turns out my 750W E-VGA can't handle two S3s.
http://www.gekkoscience.com/Last I checked the complete kit w/breakout board, cables and dell 750w server PSU was $70 plus $15 shipping for up to 3 kits. Heres a link to the Aussie reseller for Gekkoscience of these PSU kits. Ive ordered a couple of sets and seller is friendly and has excellent communications. Prices are good and cuts out the international shipping wait. http://btcminer.com.au/
|
|
|
|
futurovida
Newbie
Offline
Activity: 28
Merit: 0
|
|
July 22, 2014, 01:17:55 PM |
|
good to hear people running S3. mine still on the way...
|
|
|
|
bit_NINj4
Member
Offline
Activity: 97
Merit: 10
Money can't buy happiness but it can buy assassins
|
|
July 22, 2014, 01:27:16 PM |
|
Any word on B4 sales?
|
1NiNj4aAHokvr95rYKX4Jew8vZUPV5kmEy
|
|
|
ftoole
|
|
July 22, 2014, 01:52:06 PM |
|
Any word on B4 sales?
Id be will to bet they won't start until the 1st of next month at the earliest.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4284
Merit: 8728
'The right to privacy matters'
|
|
July 22, 2014, 02:07:30 PM |
|
Any word on B4 sales?
Id be will to bet they won't start until the 1st of next month at the earliest. why? I would think they made solid money with the first four batches. So why not sell more? Do you really think they need to upgrade it to overclock at the 500gh? I think all they need do is lower price clock it at 212.5 freq as stock. With 218.75 as the over clock. Advertise it as 430gh at 330 watts. Drop price to .65btc min order of 2 . My interest for these is an undervolt under clock pencil mod. I would love them to run at 190 freq hash at 380gh an spend about 200-220 watts
|
|
|
|
faetos
|
|
July 22, 2014, 02:30:54 PM |
|
My packages are so awesome Chinese customs wanted a second look:
07/22/2014 9:40 A.M. The package is awaiting clearing agency review. / The package is at the clearing agency awaiting final release. Shenzhen, China 07/22/2014 7:10 P.M. Departure Scan 07/22/2014 3:35 P.M. Export Scan Shenzhen, China 07/21/2014 11:28 P.M. Arrival Scan 07/21/2014 11:20 P.M. Departure Scan 07/21/2014 10:05 P.M. Origin Scan 07/21/2014 8:42 P.M. Pickup Scan 07/21/2014 7:06 A.M. The package is awaiting clearing agency review. / The package is at the clearing agency awaiting final release. China 07/20/2014 4:06 A.M. Order Processed: Ready for UPS
Joy, oh joy
|
|
|
|
ftoole
|
|
July 22, 2014, 02:32:07 PM |
|
Any word on B4 sales?
Id be will to bet they won't start until the 1st of next month at the earliest. why? I would think they made solid money with the first four batches. So why not sell more? Do you really think they need to upgrade it to overclock at the 500gh? I think all they need do is lower price clock it at 212.5 freq as stock. With 218.75 as the over clock. Advertise it as 430gh at 330 watts. Drop price to .65btc min order of 2 . My interest for these is an undervolt under clock pencil mod. I would love them to run at 190 freq hash at 380gh an spend about 200-220 watts By end of this week they should have the first 3 batches shipped. the i figure they will wait 3 or 4 days to see if their are any major issue to fix. maybe even look at that beeping issue. stock pile a few miner to have them ready for the orders and then open the new batch and chuck them out the door within 48 hrs of you placing the order.
|
|
|
|
oskuro
|
|
July 22, 2014, 02:38:35 PM |
|
So once i receive my S3´s i should install new firmware? Maybe i better test how it works as stock, and if it doesnt work well then install new firmware??(mine is batch 2, maybe has that firmware already, i will check it on thursday)
|
|
|
|
atledenin
Newbie
Offline
Activity: 29
Merit: 0
|
|
July 22, 2014, 02:53:47 PM |
|
So once i receive my S3´s i should install new firmware?
Not sure if it's newer firmware than currently installed (don't have my S3 yet, I'm a batch 3) the website suggests it the first version so it's likely its the one that'll come installed on your S3's - antMiner_S320140711.bin first version of firmware for antminer S3 Saying that it's probably worth checking the dates on the firmware on your S3's. If it's before the 11/07 then you'll likely have an older firmware version and would be worth upgrading
|
|
|
|
TyrTheAlpha
Member
Offline
Activity: 63
Merit: 10
|
|
July 22, 2014, 02:54:16 PM |
|
Is there new firmware for the S3?
|
|
|
|
oskuro
|
|
July 22, 2014, 02:56:48 PM |
|
So once i receive my S3´s i should install new firmware?
Not sure if it's newer firmware than currently installed (don't have my S3 yet, I'm a batch 3) the website suggests it the first version so it's likely its the one that'll come installed on your S3's - antMiner_S320140711.bin first version of firmware for antminer S3 Saying that it's probably worth checking the dates on the firmware on your S3's. If it's before the 11/07 then you'll likely have an older firmware version and would be worth upgrading yeah, i will check it thx
|
|
|
|
contactlight
|
|
July 22, 2014, 02:59:06 PM |
|
I have two S3s hashing stably hashing for the last 15 hours. One is at the default voltage/frequency and hashing at 450GH/s and the other one is underclocked and hashing at 220GH/s. They both seem to hash at 450-470GH/s range pretty stably when they are alone.
I only have a 750W E-VGA PSU at this point so I can't run both of them at the default settings but I ordered another 600W PSU from Amazon to run both of them overclocked.
|
|
|
|
aztecminer
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
July 22, 2014, 03:04:09 PM |
|
One of my only gripes with mine (outside an unneeded UPS shipment release frustration bomb - would only release 1 of 2 boxes to my front door)...
It lists on the UPS label on each box "Description: BITCOIN MINER" - Still not comfortable with this being out in the open given what the hardware is...
This is idiotic: each box "Description: BITCOIN MINER" - they might as well say "PLEASE STEAL ME!" Who put the description on the box, UPS or Bitmain? That means more eyes on our personal business. Especially if we live in repressive countries. can we see a picture of this ??
|
|
|
|
jimmyoh
Newbie
Offline
Activity: 49
Merit: 0
|
|
July 22, 2014, 03:12:37 PM |
|
My packages are so awesome Chinese customs wanted a second look:
07/22/2014 9:40 A.M. The package is awaiting clearing agency review. / The package is at the clearing agency awaiting final release. Shenzhen, China 07/22/2014 7:10 P.M. Departure Scan 07/22/2014 3:35 P.M. Export Scan Shenzhen, China 07/21/2014 11:28 P.M. Arrival Scan 07/21/2014 11:20 P.M. Departure Scan 07/21/2014 10:05 P.M. Origin Scan 07/21/2014 8:42 P.M. Pickup Scan 07/21/2014 7:06 A.M. The package is awaiting clearing agency review. / The package is at the clearing agency awaiting final release. China 07/20/2014 4:06 A.M. Order Processed: Ready for UPS
Joy, oh joy
At least your packages have a lot of company because mine are right there with yours. They even took away my delivery date again just to make sure those package wouldn't try to leave again. Yeah, we're having fun.
|
|
|
|
carrgo
Newbie
Offline
Activity: 5
Merit: 0
|
|
July 22, 2014, 03:15:21 PM |
|
The calculators I have used, including this one are not that great. I have 4TH mining at Eligius.st currently and make $75 a day roughly minus the $15 a day in power I pay for a total of $60 profit. My hardware will be paid for in 3 months. These are actual results(not calculated). I could never find a calculator that would give me those numbers.
|
|
|
|
daddyfatsax
|
|
July 22, 2014, 03:18:02 PM |
|
One of my units is not hashing at all after a restart. It is just sitting there discarding work and not hashing. Tried the firmware, that didn't work. Network is fine, it was working yesterday but developed an X overnight. Now after a restart it will not hash at all.
|
|
|
|
|