[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[Larvitar]

@patrike I have some suggestions based in my experience:
1- SGMiners doesn't control clocks/fans. Yeah, it's awful. I have to autostart OverdriveNTool to set a "generic" overclock/undervolt or stick at Claymore's profile (if it runs after Claymore miner). I tried to execute OverdriveNTool automatically before every sgminer session, but I couldn't. Is there a way to do it? If no, what do you think about add a third-party app to apply overclock/undervolt (maybe OverdriveNTool) or just allow to set a command to run before miner?

2- Why not make XMR-STAK-CPU default CPU cryptonight miner? It's faster than XMRig. I really miss it in Profit Miner :/

Awesome Awesome miner!

[1715562193]

1715562193

[1715562193]

1715562193

[1715562193]

1715562193

[TrueKingLord]

Maybe I missed a memo but my advanced tab is now grayed out on my managed miners - is there a way to get this back? After the latest windows 10 update I can't seem to find a version of AB that will work with any of the stable Catalyst drivers so I was going to go back to using Claymore to do my OCing, but doesn't seem like I can do that through AM anymore either. Sure I'm just missing something obvious but can't find it this morning. I'm using the current latest 4.6.3

[Zephid]

i will see more videos on youtube about this miner, need to work on HD 7000 Series

[Bimmber]

Is it possible to somehow auto convert to BTC with a help of AM ?

[Bob-Bit]

Is it possible to somehow auto convert to BTC with a help of AM ?

Yes, all the pools in the Profit switcher auto convert to BTC, but they do have minimum payout thresholds, and if you add them all at once, it might take quite awhile to get paid depending on how much equipment you have, and how powerful it is. Good luck to you!

[Bimmber]

But I want to add my own pools and coins. Any solutions then ?

[moppidoo]

But I want to add my own pools and coins. Any solutions then ?

depend on pool you are using, the pool has to support auto conversion in the very first place

[puwaha]

Patrike,

Anyway we can do some brainstorming together on a way to improve the Profit Switching mode of the software?

If i understand NemoMiner, basically its logging the 24hr est, 24hr actual, and Current est, then its doing a calculation to figure out a running offset.. then applying it to smooth out the outlier spikes in profit that result in poor actual pay.


Example:

x17:
Current: 0.01523 *which is based on current sharerate and exchange price
24hr Est: 0.01853 *which is a projection of the next 24hrs based on the current exchange rate
24hr Actual: 0.01544 *which is based on actual payouts from past 24hrs of exchanged coins

Trust:
(3/26/2018 0500EST 24hr Est:) - (3/27/2018 0500EST 24hr actual) = Trust  24hr Offset

Example:
 (0.01853)-(0.01544)=0.00309 Difference of 16.7%

So on the profit switching list,
it will compare the current price with a running offset to determine if its worth switching to, because if the current est... greater than the 16.7% current offset, than its more likely it will actually payout more.

Then the next day lets say the new next 24hr trust offset is 17.0%, it does an averaging
16.7 and 17.0 for an average running offset of 16.85% and so far as time of the software collects data.

One thing i noticed on nemo's is if the offset places the coin below the 24hr actual, it defaults to 24hr actual price on the list for profit switching.

Basically, the trust offset in nemo miner is just saying hey, this is the expected amount of drop in value on this algo after all the peeps switch over to catch the spikes in high current payout and its actually exchanged for payout to peeps. The part i dont know how it does it is how it is taking into account current prices to this trust offset to mix those values into the calculations, thus why i suggest some brainstorming by the masses to figure out a good way of doing this.

Thanks for your feedback. I'm very much open for a discussion on this topic.

Awesome Miner already have access to these numbers, so making some adjustments to the profit switcher should be possible. Please give me a little more time to investigate before I get back with a longer response.

What I had in mind since before was that the Awesome Miner cloud could help out here to build this statistics trend, so you don't have to run Awesome Miner for a longer period of time to build the trust-level. It could be provided for you.

That's great!  Yes,  somewhere to store the historic data (exchange rate,  difficulty evolution, daily actual earnings)  and making switching decisions on such data would be tremendously helpful providing fairly reliable and intelligent feature to AM. Personally I'm in the process trying to automate and build my earnings record database...this would be part of the crucial data needed for a better switching algorithm IMHO (currently there isn't an algorithm,  but more like a rule).  Would love to see more awesome users input and collaborate with Patrike making AM absolutely awesome!

Lol... I made this suggestion many months ago.  I was planning on writing a plug in to get the data and store it in a small flat file or DB, then the data can be "mined" for trends via various statistical analysis.  Without profit-switching API hooks though, it would just be data to manually change miners.

[powerstr]

https://github.com/gradinkov/sgminer-x16s/releases/tag/gradinkov1
It is necessary to update

[streaml1ne]

Is Awesome Miner capable of running two separate mining programs per rig? I have one rig with a 3GB 1060 which as of this morning refuses to work with Claymore/Phoenix with -eres 0 set. I have a dual profit profile setup, with both a 1060 profile and 1070 profile included. If I disable Claymore/Phoenix in the 1060 profile and the rig is set to use the parent profile it still tries to run Claymore/Phoenix on the 1060.

[Dragstar]

When l I try to start the miner I always get this error .Any fix ? And yes I allowed to use awesome miner folder from windows defender any fix ?
https://i.hizliresim.com/p63Bna.jpg

[Larvitar]

Is Awesome Miner capable of running two separate mining programs per rig? I have one rig with a 3GB 1060 which as of this morning refuses to work with Claymore/Phoenix with -eres 0 set. I have a dual profit profile setup, with both a 1060 profile and 1070 profile included. If I disable Claymore/Phoenix in the 1060 profile and the rig is set to use the parent profile it still tries to run Claymore/Phoenix on the 1060.

Yes, you can run two workers. I advice you to do two Profit Profiles with 1060 3GB's one with -eres 0 custom command for Claymore Dual, and stick it with GTX1060's worker. Maybe you'll need to add -di/-d (according to miner) to specify wich GPUs you will run in each worker.

[vomar]

Any chance to include Garlicoin?

[moppidoo]

Any chance to include Garlicoin?

If you are just mining Garlic regardless of profit (ie, not profit miner), just set up a pool and use unspecified algo for the pool setup, you don't need to create the coin even

If You want it to include in profit switching, find a yiimp pool that mines garlic, make it an user defined online service with appropriate password field parameters, AM will pull profit info especially if if garlic has its own port on the pool

Else, use soothaa's coin plugin

https://bitcointalk.org/index.php?topic=2979494.0

[moppidoo]

When l I try to start the miner I always get this error .Any fix ? And yes I allowed to use awesome miner folder from windows defender any fix ?
https://i.hizliresim.com/p63Bna.jpg

can't see your picture...access denied 403 Forbidden

if your issue is AM reporting software blocked, make sure you have also excluded both AwesomeMiner / AwesomeMinerService

Local
Roaming

from your %appdata% folder

[powerstr]

https://github.com/brian112358/sgminer-x16r/releases
Sgminer fork With Support for X16r and X16S for AMD GPU Miners!

Update to version 0.9.2 on 2018/03/29

[cryptochris]

Seems that after the recent updates, my remote miners no longer have the miner software window open, they are mining and you can see bfgminer.exe running in the background. They used to open and stay up the entire time mining, but now it seems that the only one to still show the bfgminer.exe command prompt window is the main system with which I control my remote miners. Everything appears to be populating over in Awesome Miner, I can see they're hashing and all that good stuff.

Anyone else have this issue?

[Seanklei10]

The sort-by-balance feature in the balance tab of AM does not sort correctly. It is sorting based on the 1st number, rather than looking at the entire number. For example, if you have three coins with balances of $105, $90 and $46  it will put the order $90, $46, $105 (9>4>1).

[Sibtigr]

Flew right to view through the web interface!
That is - now if put on under a specific user login and password visibility part of the miners - he still sees everything which is not in the list provided for prosmore only to him

[Bob-Bit]

Wondering something. So if I go into my profit profile to the pools, I can add one pool it would seem, and that's it. (and it doesn't seem to switch to that pool I add even if it's the most profitable) I want to add a bunch of pools into my own profit switching profile. What I'd actually like to do is make my own profit profile and add each algorithm at each pool myself. For example, add only the algorithms I want from ahashpool (Lets say for simplicity Lyra2rev2, and Neoscrypt) and do like this for all of the pools on each of the profit switching pools listed, and then move on to other yimp pools that don't have special checkboxes yet. This way if for example M7M is hanging the miner at Zergpool for some reason, but it's working at other pools, instead of either disabling Zergpool, or the M7M algorithm, I could just remove the Zergpool M7M pool address entry and M7M would still work with the other pools. (More profit) I'm not seeing where you can make a big list like you can for the external miners. I'm probably just missing something and will feel dumb later. Any advice? Thank you!