patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
January 01, 2019, 05:01:11 PM |
|
working release, checked. thank. I am not getting any stats back on console when running T-rex (multiple rigs). Zenemy works fine. T-rex is getting fired up and is running fine just not passing anything back re. hashrate, shares, etc. T-rex miner works fine when I test it. When T-rex miner is starting, do you see a message similar to "ApiServer: HTTP server started on 0.0.0.0:4053" (the port number will be different in your case)? Can you please send me the Diagnostics output from this miner and also the API report (toolbar: Tools -> API Report)? Thanks!
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
January 01, 2019, 05:04:39 PM |
|
Hi, are there any plans to support FPGA Miner like the BlackMiner F1 from HashAltCoins ? https://www.hashaltcoin.com/en/minersThe Miner uses a slightly modified control board from the Antminer L3+ (CGminer Version 2.3.3) since it supports different bitstreams (algos) switching the pool and the algo must be happen at the same time. regards hagie I'm not really familiar with these kind of devices. If they do provide a montioring interface (API) I can add support for them. Based on the fact that they run Cgminer - have you tested if Cgminer is running with the API enabled already? Or are there any way of accessing Cgminer settings via a web interface or Cgminer.conf via SSH on this miner?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
January 01, 2019, 05:14:34 PM |
|
PLS add miniZ miniZ is a fast and friendly Equihash <144,5> Cuda miner. https://miniz.chThanks - I will consider this one. So far I've not had many requests about it.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
January 01, 2019, 05:15:38 PM |
|
After update to latest v. 6.0.9 my Coins tab shows completely blank page. Tried all the obvious switches in coins options but no luck.
Can you please send me both your Awesome Miner log file (toolbar: Tools -> Log File) and if possible also the configuration file ConfigData.xml located in the folder: %appdata%\AwesomeMiner\ With this information I should be able to find out what the issue is. Thanks!
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
January 01, 2019, 05:17:19 PM |
|
And happy new year to all!!!
I also would like to say Happy New Year and thanks to everyone! Let's continue with all great discussions we have related to mining and Awesome Miner.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
trucobit
Jr. Member
Offline
Activity: 756
Merit: 2
|
|
January 01, 2019, 06:04:58 PM |
|
PLS add miniZ miniZ is a fast and friendly Equihash <144,5> Cuda miner. https://miniz.chThanks - I will consider this one. So far I've not had many requests about it. It is not the fastest, it is not the best, but it is the most expensive 2% fee. That's why nobody asks for it, with Gminer we are going to stop, I hope that soon they will support RTX with Gminer
|
|
|
|
baf28
Newbie
Offline
Activity: 117
Merit: 0
|
|
January 01, 2019, 06:14:55 PM |
|
PLS add miniZ miniZ is a fast and friendly Equihash <144,5> Cuda miner. https://miniz.chThanks - I will consider this one. So far I've not had many requests about it. It is not the fastest, it is not the best, but it is the most expensive 2% fee. That's why nobody asks for it, with Gminer we are going to stop, I hope that soon they will support RTX with Gminer ok Gminer CUDA Equihash Miner v1.14 avaleble Download links: Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A P.S. Gminer Fee is 2% ))))
|
|
|
|
darkneorus
Jr. Member
Offline
Activity: 238
Merit: 3
|
|
January 01, 2019, 10:11:52 PM |
|
PLS add miniZ miniZ is a fast and friendly Equihash <144,5> Cuda miner. https://miniz.chand GMiner CUDA Equihash Miner v1.14 - https://bitcointalk.org/index.php?topic=5034735.0v1.14 + fixed "Mailformed server message" error for NiceHash v1.13 + added Equihash 96,5 algorithm + decreased memory usage for Equihash 192,7 to 2.75GB + decreased memory usage for Equihash 144,5 to 1.75GB + support client.reconnect stratum command just FYI - miniZ works with Awesome Miner as a custom mining software, with Full (command line & api) compatibility with EWBF CUDA Equihash Miner selected.
|
|
|
|
bensam1231
Legendary
Offline
Activity: 1750
Merit: 1024
|
|
January 02, 2019, 01:33:06 PM |
|
Hey Patrike, there seems to be a bug with right click > change pool > pool. This has existed for quite some time. It'll swap miners to a new pool, but if the miners restart they'll default back to the pool they were originally on. Looking at properties of the miner they'll show the old pool instead of updating to whatever pool you swapped to.
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
trucobit
Jr. Member
Offline
Activity: 756
Merit: 2
|
|
January 02, 2019, 02:52:18 PM |
|
New suggestion In the capture I have left, you could put 2 or 3 mini icons with the links to, original website, Ann bitcointalk etc ... And so from the same AM interface you can go directly to those sites without having to look for them separately. It is a fact that the Apis usually carry
|
|
|
|
trucobit
Jr. Member
Offline
Activity: 756
Merit: 2
|
|
January 02, 2019, 04:35:44 PM |
|
Hello everyone, good to see if you clarify one thing. I read it in its day in the online manual, but today I could not find the entry that talks about it. In priority 0 it is more priority than 1, or it is just the reverse. Which has more priority 0 1 2 Is that I just did several tests and I have been confused with the results, if PAtrike or Moppidoo can clarify it I would appreciate it.
|
|
|
|
joseph32
Member
Offline
Activity: 418
Merit: 21
|
|
January 02, 2019, 04:45:36 PM |
|
In priority 0 it is more priority than 1... Correct! Lower numbers = Higher priority 0 Highest 1 2 3 4 5 Lowest
|
|
|
|
trucobit
Jr. Member
Offline
Activity: 756
Merit: 2
|
|
January 02, 2019, 04:52:56 PM |
|
I wanted to thank my thanks to @PAtrike for taking into account some of my suggestions.
Being able to choose Exchange for each currency for me is a before and after. By default it always shows the exchange that pays the most, which is usually a rare exchange with an inflated price. When I change the exchange to a more normal, if it is in a more normal, the price is usually much lower. The same currency can be in a bad exchange to 300 satochis, a place where you never come, and then maybe this in cryptobridge or Crex24 and the price can be 90 satochis.
This has been a great advance in my operation and improvement of profit. I also encourage everyone to use it, because Cointomine.today usually gives you very rare and no-volume exchanges with an inflated price, look for another more normal exchange where this is and select it. You'll see things with real prices where you're going to sell
Thank you Patrike, for me it is one of the best features you have added in recent months and that everyone should use.
|
|
|
|
trucobit
Jr. Member
Offline
Activity: 756
Merit: 2
|
|
January 02, 2019, 04:53:17 PM |
|
In priority 0 it is more priority than 1... Correct! Lower numbers = Higher priority 0 Highest 1 2 3 4 5 Lowest Thanks!!
|
|
|
|
baf28
Newbie
Offline
Activity: 117
Merit: 0
|
|
January 03, 2019, 07:07:49 AM |
|
ver 6.0.9 ccminer GPU 1050ti not power cable
Awesome miner shows 99W max consumption through PCIx16 75W 99W value is not correct
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
January 03, 2019, 09:13:16 AM |
|
Hey Patrike, there seems to be a bug with right click > change pool > pool. This has existed for quite some time. It'll swap miners to a new pool, but if the miners restart they'll default back to the pool they were originally on. Looking at properties of the miner they'll show the old pool instead of updating to whatever pool you swapped to.
The operations to Change Pool and Add Pool and so on are not making any permanent changes to the miner configuration - only changes what you currently mine. There should probably be an easier way to persist these changes to the miner if preferred (I do see your point here), although it would be a bit different on ASIC miners compared to GPU miners here, as saving pools to an ASIC is not always an easy operation.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
January 03, 2019, 09:16:34 AM |
|
I wanted to thank my thanks to @PAtrike for taking into account some of my suggestions.
Being able to choose Exchange for each currency for me is a before and after. By default it always shows the exchange that pays the most, which is usually a rare exchange with an inflated price. When I change the exchange to a more normal, if it is in a more normal, the price is usually much lower. The same currency can be in a bad exchange to 300 satochis, a place where you never come, and then maybe this in cryptobridge or Crex24 and the price can be 90 satochis.
This has been a great advance in my operation and improvement of profit. I also encourage everyone to use it, because Cointomine.today usually gives you very rare and no-volume exchanges with an inflated price, look for another more normal exchange where this is and select it. You'll see things with real prices where you're going to sell
Thank you Patrike, for me it is one of the best features you have added in recent months and that everyone should use.
Thanks for your nice feedback on this feature! It's always great to hear about that features are being used and making the mining operations running smoother.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
January 03, 2019, 09:25:52 AM |
|
ver 6.0.9 ccminer GPU 1050ti not power cable
Awesome miner shows 99W max consumption through PCIx16 75W 99W value is not correct
What Ccminer report here is probably what the nVidia driver is reporting. Is it constantly showing too high power usage or only once in a while? Have you used another tool like GPU-Z or similar to verify if you get the same readings there? I do see your point about the PCI-E limitation at 75W here, but that's only a limitation according to the specification and not always enforced. AMD RX480 could consume over 100W via the PCI-E interface for example.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
baf28
Newbie
Offline
Activity: 117
Merit: 0
|
|
January 03, 2019, 09:34:09 AM |
|
ver 6.0.9 ccminer GPU 1050ti not power cable
Awesome miner shows 99W max consumption through PCIx16 75W 99W value is not correct
What Ccminer report here is probably what the nVidia driver is reporting. Is it constantly showing too high power usage or only once in a while? Have you used another tool like GPU-Z or similar to verify if you get the same readings there? I do see your point about the PCI-E limitation at 75W here, but that's only a limitation according to the specification and not always enforced. AMD RX480 could consume over 100W via the PCI-E interface for example. I see a different value from 50W to 99W algo x16rt The GPU-3 does not show the consumption of watts on my 1050 without additional power. P.S. I realized that the problem is in ccminer so you can no longer help me, thanks.
|
|
|
|
ralf007at
Newbie
Offline
Activity: 52
Merit: 0
|
|
January 03, 2019, 09:38:39 AM |
|
Hi Patrike,
we just want to configure our new Antminer T15/S15
but if we Configure API Access...
we just get the error-message: Connection failure
the ssh credentials work for the S9?!
BR Ralf
|
|
|
|
|