dasch
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 09, 2019, 11:29:05 AM |
|
Hi,
I'm trying to update from 6.0.9 to 6.0.10 but it fails everytime. Here is the log
Hi. Can you please try to reboot the system once? It's not too uncommon that pending Windows Updates are preventing MSI-based installers from running correctly. Thx for support, I had a pending update, I rebooted twice but still the same issue, even with the 6.0.11 version.
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 09, 2019, 12:10:10 PM |
|
Hello @patrike another easy and useful suggestion.
I usually make measurements of how much a coin / pool yields. With which in the end I get a profit to vary in the currency pool in AM, I have from 0.80 to 1.30.
In the Miners tab, this is correctly reflected, the profit that shows is the one that estimates AM + my profit correction of the currency pool.
But in the Coins tab it does not reflect. If a two coins have a gain of 0.0020 but one has a profit of 0.80 and another of 1.10, it should show 0.0016 and the other 0.0022. In this way, by ordering the coins for profit, it will do so in a correct manner. Because in Coins it shows the profitability without modifying the profit stipulated by me. And sometimes it drives me crazy. Why does it change to this currency and not to this one? Sometimes it changes to the fourth most profitable currency instead of the third, and the reason is that it auto swicth if it is taken into account, but it is not shown in Coins. I hope it is understandable and that you see it logical, because for me it is.
You have a Profit Factor setting for both a Pool and a Coin. I assume you ask about the Profit Factor for the Pool (please correct me if I misunderstood your question)? The setting for the Coin is used by both the Coins tab and the Miners tab. The setting for the Pool is only used on the Miners tab, not the Coins tab. The reason is that you can have two pools for the same coin, and these two pools can have different Profit Factors. For that reason it's not possible to say that the coin has a certain profit factor as it will depend on which of these pools you are actually mining on. I understand you but I do not share it. Suppose I have 2 groups for the same currency, something that would be very strange. With having in the pool configuration a box to mark, that is type. Use this "profit" in coins, and do not mark it in the other group, the problem is already solved. That it helps me to be getting the "profits" measured by hours of different currencies / pools, if then this is not reflected in Coins. In coins tells me how much I will get according to my hash, but that does not take into account my deviation from the "profit" 0.9 - 1.1 and even from 0.7 to 1.3 I work a lot. Then it does not make much sense to see the coins tab, because it does not take into account this information. If I have several Pools for a coin, only one should be marked "use this profit in coins", I do not see it difficult. Well, they are only suggestions in good faith. I will have to think about this a bit more. Right now the Coins tab is only representing the coins and any profit factor on the coins. A coin is not linked to any pool - it's always the other way around and multiple pools can use the same coin. Maybe there should be a new Pools tab in the future? That one could show information from a Pool point of view instead of Coins point of view.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 09, 2019, 12:11:44 PM |
|
Hi,
I'm trying to update from 6.0.9 to 6.0.10 but it fails everytime. Here is the log
Hi. Can you please try to reboot the system once? It's not too uncommon that pending Windows Updates are preventing MSI-based installers from running correctly. Thx for support, I had a pending update, I rebooted twice but still the same issue, even with the 6.0.11 version. Thanks for the update. Can you please try to manually download and run the installer to upgrade to the latest development version? Main application: https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msiRemote Agent: https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
JimBrown462
Newbie
Offline
Activity: 59
Merit: 0
|
|
January 09, 2019, 01:14:58 PM |
|
On my rig, each algo's intensity and OC settings are tuned to just below the edge of instability. Dropping v0.9.1 in pushed it over the edge. I will revisit it and see what tuning changes I need to make. If I have to lower the settings such that I get less hash rate with v0.9.1, then back to v0.8.9 I go.
...jim
Got it working nicely now. I had to adjust my GPU OC settings slightly down on most algos. But hash rates are better on some algos, and about the same on the rest. ...jim
|
|
|
|
Binary100100
Member
Offline
Activity: 180
Merit: 10
|
|
January 09, 2019, 07:03:47 PM |
|
I signed up just for the purpose of testing AwesomeMiner for Beam but I can't run the benchmark tools. So far it seems to be working averaging 60 - 62 H/s using 8 1070's. I'm also keeping in mind that we're pretty limited on pools and exchanges for Beam at the moment so I think we can expect some wrinkles. Great start and I appreciate your hard work and dedication.
|
|
|
|
Regulater
Member
Offline
Activity: 273
Merit: 12
|
|
January 09, 2019, 08:05:00 PM |
|
Can we get support for Aeternity now that BMiner supports it.
Yes, there will be a new development version released soon. It will have BMiner 11.4 including CuckooCycle (Aeternity) and Equihash 150.5 (Beam) support. I am using the Bminer on AwesomeMiner for Aeternity but it looks like there is no support for Rig Names or atleast its not working. Can we get this fixed.
|
|
|
|
dasch
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 09, 2019, 09:48:44 PM |
|
No problems for remote agents on my miners. But on my computer the main application installator give me this post. https://i.imgur.com/MKUGrW2.pngThe same if I try to uninstall AM.
|
|
|
|
|
stolarzz
Newbie
Offline
Activity: 111
Merit: 0
|
|
January 10, 2019, 01:03:16 PM |
|
Any chance for add TT-Miner integration to your software?
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 10, 2019, 01:45:59 PM |
|
I signed up just for the purpose of testing AwesomeMiner for Beam but I can't run the benchmark tools. So far it seems to be working averaging 60 - 62 H/s using 8 1070's. I'm also keeping in mind that we're pretty limited on pools and exchanges for Beam at the moment so I think we can expect some wrinkles. Great start and I appreciate your hard work and dedication. Is it that Equihash 150,5 isn't listed as part of the benchmark or that the actual benchmark is failing? The benchmark feature currently requires an algorithm to be made available for the profit switcher via the pools defined in the Options dialog, Profit Switching section - for example as a custom pool.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 10, 2019, 01:47:52 PM |
|
Can we get support for Aeternity now that BMiner supports it.
Yes, there will be a new development version released soon. It will have BMiner 11.4 including CuckooCycle (Aeternity) and Equihash 150.5 (Beam) support. I am using the Bminer on AwesomeMiner for Aeternity but it looks like there is no support for Rig Names or atleast its not working. Can we get this fixed. If you use the Diagnostics button to verify the command line generated by Awesome Miner, is the rig name (the field "Add to Worker Name" defined in the Properties of your Managed Miner) missing here? When I try with "SomeUniqueName" as for the setting "Add to worker name" it shows up correctly: bminer.exe -uri aeternity://MyWalletHere.SomeUniqueName:x@ae.f2pool.com:7898
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 10, 2019, 01:49:01 PM |
|
Any chance for add TT-Miner integration to your software?
I have this one on the todo-list but I've not yet had time to investigate it. If there is a real demand for it and it performs better than all other mining software it can be added.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
stolarzz
Newbie
Offline
Activity: 111
Merit: 0
|
|
January 10, 2019, 01:56:47 PM |
|
Any chance for add TT-Miner integration to your software?
I have this one on the todo-list but I've not yet had time to investigate it. If there is a real demand for it and it performs better than all other mining software it can be added. This one performs very well with MTP and ProgPow
|
|
|
|
baf28
Newbie
Offline
Activity: 117
Merit: 0
|
|
January 10, 2019, 02:21:35 PM |
|
GMiner v1.17 available for download v1.17 + improved performance for Equihash 150,5 + improved stability for Equihash 150,5 + increased memory usage for Equihash 150,5 to 3.8GB NOTE for RTX users Equihash 150,5 may not work on RTX card in version 1.17, please use version 1.15, we will fix issues with RTX cards in next release. Performance on stock GPU settings: Equihash 150,5: Palit GTX 1060 JetStream 6GB ~12 Sol/s Palit GTX 1070 Ti JetStream 8GB ~23 Sol/s MSI GTX 1080 SEA HAWK EK X 8GB ~24 Sol/s EVGA GTX 1080 Ti Founders Edition 11GB ~29 Sol/s Gigabyte 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~30 Sol/s https://bitcointalk.org/index.php?topic=5034735.msg49156237#msg49156237
|
|
|
|
baf28
Newbie
Offline
Activity: 117
Merit: 0
|
|
January 10, 2019, 03:18:13 PM |
|
Hi
Bug
Awesome miner ver 6.0.11 and Gminer 1.17
The received shares accepted are not displayed in the Awesome miner window, and in the miner’s console window the shares are also displayed on the pool.
algo 150_5
|
|
|
|
O-Coin
Jr. Member
Offline
Activity: 61
Merit: 2
|
|
January 10, 2019, 03:29:35 PM |
|
Any Instructions on how to use google Drive for auto download of miner software. The link generated by drive is not.zip even though the file is. @Patrike
I configured the shared link to auto download and it works but Awesome miner is not finding the miner. Any info anyone please.
I just want this for all the miners that are not on git hub or should I say that are on mega.
Thanks
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 10, 2019, 03:37:33 PM |
|
Hi
Bug
Awesome miner ver 6.0.11 and Gminer 1.17
The received shares accepted are not displayed in the Awesome miner window, and in the miner’s console window the shares are also displayed on the pool.
algo 150_5
Your observation is correct and it's only for Equihash 150,5 where it's missing the information. When I use the API Report button in Awesome Miner, the output from the Gminer API indicates the following - even if I see accepted shares in the Console window: "stratum": { "accepted_shares": 0, "rejected_shares": 0 } I will share these details in the Gminer thread as well - and give you the credits for finding it.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
baf28
Newbie
Offline
Activity: 117
Merit: 0
|
|
January 10, 2019, 04:27:31 PM |
|
Hi
Bug
Awesome miner ver 6.0.11 and Gminer 1.17
The received shares accepted are not displayed in the Awesome miner window, and in the miner’s console window the shares are also displayed on the pool.
algo 150_5
Your observation is correct and it's only for Equihash 150,5 where it's missing the information. When I use the API Report button in Awesome Miner, the output from the Gminer API indicates the following - even if I see accepted shares in the Console window: "stratum": { "accepted_shares": 0, "rejected_shares": 0 } I will share these details in the Gminer thread as well - and give you the credits for finding it. thank
|
|
|
|
GEBucky
Copper Member
Jr. Member
Offline
Activity: 127
Merit: 1
|
|
January 10, 2019, 09:56:56 PM |
|
Has anyone figured out how to configure gminer 1.18 with AM. Having trouble getting the parameters to pass given it's unique way of specifying the pool. I am just pointing the miner profile to the .exe file on the remote rig and trying to pass everything in the command line that was in my "run.bat" file but not sure about algo, port, etc (what needs to be passed explicity and what is AM passing?). I set it up on Leafpool with not port or username and passing those in the miner config. Not working.
Thanks
|
|
|
|
GEBucky
Copper Member
Jr. Member
Offline
Activity: 127
Merit: 1
|
|
January 10, 2019, 10:21:29 PM Last edit: January 10, 2019, 10:48:18 PM by GEBucky |
|
Has anyone figured out how to configure gminer 1.18 with AM. Having trouble getting the parameters to pass given it's unique way of specifying the pool. I am just pointing the miner profile to the .exe file on the remote rig and trying to pass everything in the command line that was in my "run.bat" file but not sure about algo, port, etc (what needs to be passed explicity and what is AM passing?). I set it up on Leafpool with not port or username and passing those in the miner config. Not working.
Thanks
Figured it out. Needed to put it in API mode only. And set a api port in the config "10050". Then all parameter from the "run.bat" can be passed from the miner profile and it just ignores any configs AM is making. It is not returning shares but all other stats are coming through. Think that's an AM issue. It would also be great to get BEAM added to coins - there are pricing sources for it.
|
|
|
|
|