[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[baf28]

Barely visible. Watch the capture, arrina are ZEL and BTZ de cointomine, and just below you can see a little ZAL of coinscalcutor

What I do not know if it is the cointomine api problem that calls the coins in another way internally, or some change in this latest version of today.

I have updated and just after it has happened. I have the 4 aggregators activated at the same time, Cointomine with premium API due to my donation.

I'll tell you if it can be fixed in some way.

This is basically the same issue and the same workaround can be applied. As the same coin can exists multiple times with different algorithms (for example Digibyte and a few more), Awesome Miner can list each combination of unique coin and algorithm.

In this case we have a few coins that are listed with both Equihash 144.5 (from CoinToMine) and ZHash (from WhatToMine/CoinCalculators?). Both will show up as Awesome Miner see they have different algorithms.

I will try to re-map some of these coins to the correct algorithms in Awesome Miner itself.

Edit: It looks like WhatToMine and CoinCalculators lists a few coins differently as well. XSG is one example - making it show up twice - one for each algorithm. Right now I'm a bit unsure which one is correct and this goes for a few coins.

There is a solution.
Options - Statistics Providers and Overridd coin algoritm Configure
Set ZEL to Zhash
Set BTCZ to Zhash
Then apply the changes and click the update button on the coins tab

[moppidoo]

Patrike,

Bit of a problem with exchange/volume filtering (sorry been away for the past few weeks, so didn't go through the posts thoroughly if it's been mentioned already).

Coins are grayed out in the following scenario when
 -> Coin meets the minimum volume set in Options -> Statistics Providers
 -> Exchange list in API is empty

in the below example is Espers (ESP), Statistics Providers Ordering (CC > WTM > CTM).

Use all exchanges (check), minimum exchange volume (0.002 BTC)


CMC's 24h volume matches the API of approx $196 USD

I know where the problem is, it's similar to previous scenario where price is set to 0 if no exchange is available in the API, except this time it affects the volume, is it something you could add to use global value even if calculator returns no supported exchanges?

[GEBucky]

Hi @Patrik. Thanks for including the latest version of gminer!. I had been using 1.18 manually. Given the somewhat odd way that gminer accepts parameters, I just created a pool for Leafpool and left everything blank except us.leafpool.com. Then configured each managed miner and passed everything through command line:

--algo 150_5 --server beam-us.leafpool.com --port 3333 --ssl 1 --api 10050 --user 228c0952842698bffd2b1bce30ad2c612b6fc6exxx2a4fc4559aa2209a6b1b211e9.rig1/myname@yahoo.com

I can't seem to get a "standard config" working with the new gminer. I would think I could pull port and put that in the pool definition as standard ":3333", and put wallet address there. On each miner profile then add worker name/email.

for some reason it wont start under that configuration. It attempts to start the miner but gets a connection timeout on us.leafpool.com:3333.  I can just leave it manual for now but would like to move to using the standard download.

I there anything unique to the gminer setup other than what I outlined above?

Thanks

I apologize, I did everything in a standard way, but I do not know how to post images of screenshots, please follow my links, everything is shown there. Thank.

Bump for you.... and your images looks like not supported.

https://yadi.sk/i/F2NsXSwb4PSgqA
https://yadi.sk/i/t3SwW5soDaC1AA
https://yadi.sk/i/us4ZpKaNXeseqA

Those appear to just be screenshots of the working miner. I was looking for specifics on the configuration. Thanks though.

[patrike]

On wtm we treat all 144,5 coins as zhash.

Just makes more sense from miner perspective to aggregate them under single name, as all of them use same miner and hashrate values.

Many thanks for your comment on this.

What you do here makes sense so I will use the same concept in Awesome Miner - make it ZHash all the time to avoid confusion.

[patrike]

Patrike,

Bit of a problem with exchange/volume filtering (sorry been away for the past few weeks, so didn't go through the posts thoroughly if it's been mentioned already).

Coins are grayed out in the following scenario when
 -> Coin meets the minimum volume set in Options -> Statistics Providers
 -> Exchange list in API is empty

in the below example is Espers (ESP), Statistics Providers Ordering (CC > WTM > CTM).

Use all exchanges (check), minimum exchange volume (0.002 BTC)


CMC's 24h volume matches the API of approx $196 USD

I know where the problem is, it's similar to previous scenario where price is set to 0 if no exchange is available in the API, except this time it affects the volume, is it something you could add to use global value even if calculator returns no supported exchanges?

Within a statistics provider, for example CC or WTM, Awesome Miner handle the concept of no exchange.

Awesome Miner do find the coin on CC in this case, and CC has highest priority, it will currently not even look at the same coin if provided by WTM or CTM. The result is that even if what CC provides doesn't match the volume filter, Awesome Miner will not look at the additional exchanges at CTM. Each provider is processed individually and coins already found will be ignored if found again.

I understand you point here, but I will have to redesign a few concepts before the scenario you describe can be supported. Thanks for the feedback on this!

[patrike]

Hi @Patrik. Thanks for including the latest version of gminer!. I had been using 1.18 manually. Given the somewhat odd way that gminer accepts parameters, I just created a pool for Leafpool and left everything blank except us.leafpool.com. Then configured each managed miner and passed everything through command line:

--algo 150_5 --server beam-us.leafpool.com --port 3333 --ssl 1 --api 10050 --user 228c0952842698bffd2b1bce30ad2c612b6fc6exxx2a4fc4559aa2209a6b1b211e9.rig1/myname@yahoo.com

I can't seem to get a "standard config" working with the new gminer. I would think I could pull port and put that in the pool definition as standard ":3333", and put wallet address there. On each miner profile then add worker name/email.

for some reason it wont start under that configuration. It attempts to start the miner but gets a connection timeout on us.leafpool.com:3333.  I can just leave it manual for now but would like to move to using the standard download.

I there anything unique to the gminer setup other than what I outlined above?

Thanks

I apologize, I did everything in a standard way, but I do not know how to post images of screenshots, please follow my links, everything is shown there. Thank.

Bump for you.... and your images looks like not supported.

https://yadi.sk/i/F2NsXSwb4PSgqA
https://yadi.sk/i/t3SwW5soDaC1AA
https://yadi.sk/i/us4ZpKaNXeseqA

Those appear to just be screenshots of the working miner. I was looking for specifics on the configuration. Thanks though.

When configuring like @baf28 suggested, Awesome Miner should produce a command line similar to what you are looking for. You can use the Diagnostics button to verify that.

What are the configuration specifics you are looking for here? If I enter your pool URL, worker and add the ssl-flag, Gminer stats mining just fine where Awesome Miner produced the following:
miner.exe  --ssl 1 -a 150_5 -s beam-us.leafpool.com -n 3333 -u 228c0952842698bffd2b1bce30ad2c612b6fc6exxx2a4fc4559aa2209a6b1b211e9.rig1/myname@yahoo.com -p x --pers auto -w 0 --api 4041

[cost82el]

hi patrike, for tensority cant see dual mining hashrate... how i can setup dual mining eth-btm?

[trucobit]

Barely visible. Watch the capture, arrina are ZEL and BTZ de cointomine, and just below you can see a little ZAL of coinscalcutor

What I do not know if it is the cointomine api problem that calls the coins in another way internally, or some change in this latest version of today.

I have updated and just after it has happened. I have the 4 aggregators activated at the same time, Cointomine with premium API due to my donation.

I'll tell you if it can be fixed in some way.

This is basically the same issue and the same workaround can be applied. As the same coin can exists multiple times with different algorithms (for example Digibyte and a few more), Awesome Miner can list each combination of unique coin and algorithm.

In this case we have a few coins that are listed with both Equihash 144.5 (from CoinToMine) and ZHash (from WhatToMine/CoinCalculators?). Both will show up as Awesome Miner see they have different algorithms.

I will try to re-map some of these coins to the correct algorithms in Awesome Miner itself.

Edit: It looks like WhatToMine and CoinCalculators lists a few coins differently as well. XSG is one example - making it show up twice - one for each algorithm. Right now I'm a bit unsure which one is correct and this goes for a few coins.

There is a solution.
Options - Statistics Providers and Overridd coin algoritm Configure
Set ZEL to Zhash
Set BTCZ to Zhash
Then apply the changes and click the update button on the coins tab

perfect thank you very much, sometimes we do not remember all the options. I fixed it, so I'm grateful.

[patrike]

hi patrike, for tensority cant see dual mining hashrate... how i can setup dual mining eth-btm?

For Bminer I've noticed that I get 0 for both hashrates every now and then for both the primary and dual hashrate. But I do get two readings most of the time.

Can you send a screenshot and an API report (toolbar: Tools -> API Report) when you see this issue? Thanks!

[patrike]

Awesome Miner version 6.1.1

 Mining software
  - BMiner 11.4.1
  - SRBMiner 1.7.6
 Corrections
  - Make the settings for CUDA device order and power usage configurable in all editions of the software
  - Adjust the algorithm Equihash 144,5 to show up as ZHash to be consistent across all coin statistics providers

[cost82el]

i mean in awesome miner settings cant see ...
http://prntscr.com/m6yd43
http://prntscr.com/m6ydkr
nbminer dual mining is not integrated?

[baf28]

Awesome Miner version 6.1.1

  - Adjust the algorithm Equihash 144,5 to show up as ZHash to be consistent across all coin statistics providers

This is a bad decision. it was better to make calculators stick to the same algorithm or rewrite through the settings to the required algorithm.

[patrike]

i mean in awesome miner settings cant see ...
http://prntscr.com/m6yd43
http://prntscr.com/m6ydkr
nbminer dual mining is not integrated?

Thanks for sharing the details. Awesome Miner doesn't support dual mining for NBminer yet. It's on the ToDo-list.

[patrike]

Awesome Miner version 6.1.1

  - Adjust the algorithm Equihash 144,5 to show up as ZHash to be consistent across all coin statistics providers

This is a bad decision. it was better to make calculators stick to the same algorithm or rewrite through the settings to the required algorithm.

I'm open to suggestions here.

Maybe another way would be to have Awesome Miner automatically change this on a per-coin level instead. The drawback would be that as soon as a new coin shows up on any of these algorithms, the mapping would be outdated. Doing it on an algorithm level is easier from that point of view.

It's however not a good idea to force all users to manually go to the settings and change the algorithms for a number of coins just because they are reported differently from the coin statistics sources. The goal must always be that things should work as good as possible out-of-the-box.

[baf28]

I have a problem.
I created 2 pools with the same settings: mininghub and mrr
When I select the mrr pool in the switch profile, an error occurs that the pool is not suitable.
And if you choose not mrr, then everything works.
What can be wrong?


https://i.ibb.co/0X3zhn5/2019-01-14-19-03-35.png

https://i.ibb.co/1z3qKtv/2019-01-14-19-04-04.png

https://i.ibb.co/frpn39Z/2019-01-14-19-08-11.png

[moppidoo]

Just an elaboration to @baf28's report of not seeing "View Details" -> "Profit switching" tab not being populated in 6.1.1 (he removed the post, and I had that with 6.1.0 as well), I just had that happening to myself and found that it was due to the following:

-> NBMiner (no algos enabled by default anymore)
-> NBMiner is (was) enabled in all affected miners' profit profiles

to resolve, I either had to
disable NBMiner from the profile
OR
enable an algo (Tensority for example) and add "tensority" to custom command line in Options -> Managed Software

I assume this might've happen with any managed software in similar to above circumstances.

Cheers,

[patrike]

I have a problem.
I created 2 pools with the same settings: mininghub and mrr
When I select the mrr pool in the switch profile, an error occurs that the pool is not suitable.
And if you choose not mrr, then everything works.
What can be wrong?

Can you please send me the log files for this scenario and indicate what time you run into the problem?

[patrike]

Just an elaboration to @baf28's report of not seeing "View Details" -> "Profit switching" tab not being populated in 6.1.1 (he removed the post, and I had that with 6.1.0 as well), I just had that happening to myself and found that it was due to the following:

-> NBMiner (no algos enabled by default anymore)
-> NBMiner is (was) enabled in all affected miners' profit profiles

to resolve, I either had to
disable NBMiner from the profile
OR
enable an algo (Tensority for example) and add "tensority" to custom command line in Options -> Managed Software

I assume this might've happen with any managed software in similar to above circumstances.

Cheers,

Thanks for the details.

Your observations are correct for NBMiner, where the issue is that no algorithms where enabled by default. I will correct this.

The only scenario I was able to reproduce where no pools showed up for the profit switcher was when NBMiner was the only software made available for the profit switcher or when no other combination of enabled software and algorithm was found. If I put NBMiner in the list of available software, and also have other software and algorithms available, the profit switcher would go for one of the other software as it considered NBMiner to be not usable.

Even if I'm not able to reproduce the exact same issue here, the correction should still make sense here.

[baf28]

I have a problem.
I created 2 pools with the same settings: mininghub and mrr
When I select the mrr pool in the switch profile, an error occurs that the pool is not suitable.
And if you choose not mrr, then everything works.
What can be wrong?

Can you please send me the log files for this scenario and indicate what time you run into the problem?

I sent you a personal message information and mail

[trucobit]

https://dl.dropboxusercontent.com/s/kaaxtoh0q3a56ai/Captura%20de%20pantalla%202019-01-15%20a%20las%2013.09.00.png

Hi again, everybody. I have another problem in another currency equihash

XSG, when mining it does not show me the profit, nor the coins per day. I have tried in different pools and I do not mark the profit when mining.

in the Coins tab it is output correctly and if it shows the daily gain estimate, but not when mining. In the catch you can see.

Let's see if there is some way to solve it by touching something in options. This is a community that helps a lot, it is a fantastic community.