[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

Would like to be able to have some of the reporting on the Miners view for the Antminers, with the info like is shown with Spiceminer's Antviewer though. https://bitcointalk.org/index.php?topic=760810.20
Just need the Asic status, Best Share & Freq. as you already have Ghs, Reject and HW errors. Then I wouldn't need to run Spiceminers as well as Awesome.

I don't think the Antminer's publish the ASIC status and Frequency statistics via the API. It could be that the Antviewer software you are referring to is logging in to the web page and try to parse the output.

Best Share can be added in Awesome Miner like this:

Open the Customize Progress field, see:
http://www.awesomeminer.com/help/customizefield.aspx

If you want to modify the line that by default says "Rejected: XX", you can put a check in the Line 2 box, and enter the following:
"R: " + status.Rejected +  ", BS: " + status.BestShare

Now you will see both Rejected and Best Share on the second line in the Progress field for all your miners.

[1714833037]

1714833037

[1714833037]

1714833037

[1714833037]

1714833037

[1714833037]

1714833037

[1714833037]

1714833037

[patrike]

Really enjoying the product, so thank you! But I am also not confident I am understanding a couple statements from the website help vs my results.  I have enabled the awesome profit switching rule and its set for 30 minutes.  I also enabled the check box to manually implement and see the option on top, love it!

Help: The Awesome Profit Switching rule requires all pools to switch between to be added to the miner. Of all the added pools, the most profitable will automatically be prioritized.

Me: I am not finding the priorities changing over time even as the coin's and pool profit-abilities change.

Help: If the pool has a specific coin specified, the coin statistics will be used to calculate the profitability of the coin, and the Awesome Profit Switching rule will automatically change to the pool if it's more profitable than any of the added multi-pools.

Me: Pool can mean either a hosted pool such as NiceHash or the pool of coins/pools inside AwesomeMiner.  If I am using NiceHash and also added a dedicated pool for a coin NiceHash knows nothing about, will it get the profitability from Coinwarz and those sites or does it rely on NiceHash to give individual statistics? What if NiceHash knows nothing about that coin?

Mainly I am not seeing consistent results in changing pools with the awesome profit enabled.  For example, ANC coin is always at my highest priority and it starts mining with this.  I then manually switch to a different pool, say NiceHash.  I then re-add my awesome pool which consists of both.  Technically if ANC was my highest priority and thus most profitable, it would switch back, no? And vice versa...in either case it seems to stick with what I move it to and not auto-pick after the 30 minute interval or manual request.

The profit switcher is working based on statistics from some of the popular pools. The pools supported are TradeMyBit, West/NiceHash, LTCrabbit, Yaamp.

The easiest way to get all the configuration needed is to follow this guide, where you can download all pool info:
http://www.awesomeminer.com/guide/awesomeprofit.aspx

If you use Coinwarz statistics and want to mine for Darkcoin (just an example), Awesome Miner will compare the profit of Darkcoin with the current profitability of mining NiceHash, and switch to the most profitable one. It is however important that all these pools to be considered by the profit switcher are added to the miner pool list. If you go to the Pools-tab for a running miner, you see the list of all the pools - and those you want to profit switch between must be in the list (example screenshot: http://www.awesomeminer.com/img/guide/profit_mining.png)

[spiceminer15]

Would like to be able to have some of the reporting on the Miners view for the Antminers, with the info like is shown with Spiceminer's Antviewer though. https://bitcointalk.org/index.php?topic=760810.20
Just need the Asic status, Best Share & Freq. as you already have Ghs, Reject and HW errors. Then I wouldn't need to run Spiceminers as well as Awesome.

I don't think the Antminer's publish the ASIC status and Frequency statistics via the API. It could be that the Antviewer software you are referring to is logging in to the web page and try to parse the output.

hate to shoot  my own app in the foot, but

antminers do report the asic stats and freq.

with the "stats" command

it'll return

chain_acs1
chain_acs2
frequency

 

[Axiste]

Would like to be able to have some of the reporting on the Miners view for the Antminers, with the info like is shown with Spiceminer's Antviewer though. https://bitcointalk.org/index.php?topic=760810.20
Just need the Asic status, Best Share & Freq. as you already have Ghs, Reject and HW errors. Then I wouldn't need to run Spiceminers as well as Awesome.

I don't think the Antminer's publish the ASIC status and Frequency statistics via the API. It could be that the Antviewer software you are referring to is logging in to the web page and try to parse the output.

hate to shoot  my own app in the foot, but

antminers do report the asic stats and freq.

with the "stats" command

it'll return

chain_acs1
chain_acs2
frequency

 

Shows your a good bloke who cares about helping people, not his own pocket 

[patrike]

hate to shoot  my own app in the foot, but

antminers do report the asic stats and freq.

with the "stats" command

it'll return

chain_acs1
chain_acs2
frequency

Many thanks, I really appreciate that! I used to have an Antminer S1, but not anymore.

[spiceminer15]

hate to shoot  my own app in the foot, but

antminers do report the asic stats and freq.

with the "stats" command

it'll return

chain_acs1
chain_acs2
frequency

Many thanks, I really appreciate that! I used to have an Antminer S1, but not anymore.

 

[sab4you]

The profit switcher is working based on statistics from some of the popular pools. The pools supported are TradeMyBit, West/NiceHash, LTCrabbit, Yaamp.

The easiest way to get all the configuration needed is to follow this guide, where you can download all pool info:
http://www.awesomeminer.com/guide/awesomeprofit.aspx

If you use Coinwarz statistics and want to mine for Darkcoin (just an example), Awesome Miner will compare the profit of Darkcoin with the current profitability of mining NiceHash, and switch to the most profitable one. It is however important that all these pools to be considered by the profit switcher are added to the miner pool list. If you go to the Pools-tab for a running miner, you see the list of all the pools - and those you want to profit switch between must be in the list (example screenshot: http://www.awesomeminer.com/img/guide/profit_mining.png)

Thanks, I am pretty sure I am following the directions and see it change sometimes but not confident its working as intended.

For example, I am remotely managing a Gridseed 5 Mhz blade (scrypt only).  I have selected my "Awesome Miner pool" which consists of the supported Pools along with some individual coins.  It has chosen to use the Nicehash pool.

As a test, I have also added my crappy graphics card which gets about 50 khs (scrypt only).  I too select my "Awesome Miner pool" with the exact same pool/coin options.  If this software was auto-picking the most profitable and NiceHash was already picked, one would think the graphics card would also be assigned NiceHash, but no, it gets a coin.

If things are most profitable, why would different devices get different coins/pools?

[patrike]

The profit switcher is working based on statistics from some of the popular pools. The pools supported are TradeMyBit, West/NiceHash, LTCrabbit, Yaamp.

The easiest way to get all the configuration needed is to follow this guide, where you can download all pool info:
http://www.awesomeminer.com/guide/awesomeprofit.aspx

If you use Coinwarz statistics and want to mine for Darkcoin (just an example), Awesome Miner will compare the profit of Darkcoin with the current profitability of mining NiceHash, and switch to the most profitable one. It is however important that all these pools to be considered by the profit switcher are added to the miner pool list. If you go to the Pools-tab for a running miner, you see the list of all the pools - and those you want to profit switch between must be in the list (example screenshot: http://www.awesomeminer.com/img/guide/profit_mining.png)

Thanks, I am pretty sure I am following the directions and see it change sometimes but not confident its working as intended.

For example, I am remotely managing a Gridseed 5 Mhz blade (scrypt only).  I have selected my "Awesome Miner pool" which consists of the supported Pools along with some individual coins.  It has chosen to use the Nicehash pool.

As a test, I have also added my crappy graphics card which gets about 50 khs (scrypt only).  I too select my "Awesome Miner pool" with the exact same pool/coin options.  If this software was auto-picking the most profitable and NiceHash was already picked, one would think the graphics card would also be assigned NiceHash, but no, it gets a coin.

If things are most profitable, why would different devices get different coins/pools?

Could you please send me your Awesome Miner log file? Awesome Miner is writing log information to AwesomeMiner.log. To find this file, open the Options dialog, Advanced section, and select either Open to open the file in a text editor, or Open folder to open the folder where the log file is located, so it can be copied or attached to an e-mail.

[JuanHungLo]

Patrike, I am attempting to install the latest Awesome Miner Remote Service.  I have completely uninstalled the previous version.
Using Win 7-64.  The installation hangs as it is attempting to start services it then has a popup that says that the IntelliBreeze Software Maintenance Service failed to start.  Please advise.

[patrike]

Patrike, I am attempting to install the latest Awesome Miner Remote Service.  I have completely uninstalled the previous version.
Using Win 7-64.  The installation hangs as it is attempting to start services it then has a popup that says that the IntelliBreeze Software Maintenance Service failed to start.  Please advise.

I will try to reproduce this problem and get back to you. Is the Windows user you are running as an Administrator?

[JuanHungLo]

Patrike, I am attempting to install the latest Awesome Miner Remote Service.  I have completely uninstalled the previous version.
Using Win 7-64.  The installation hangs as it is attempting to start services it then has a popup that says that the IntelliBreeze Software Maintenance Service failed to start.  Please advise.

I will try to reproduce this problem and get back to you. Is the Windows user you are running as an Administrator?

Yes

[4x13]

Patrike,

can you walk us through creating a "Rule" to do the following.

check to see what the AVG hashrate is, if it is below 400GH/s then reboot
wait 5 minutes check again to see if hashrate is below 400GH/s? if good, wait another 5 minutes then repeat.

Thanks!! Great App, Keep up the 'Awesome Work'!!

[4x13]

Also, Is there any specific reason the app won't install on a VM image of windows 7??

[patrike]

Patrike,

can you walk us through creating a "Rule" to do the following.

check to see what the AVG hashrate is, if it is below 400GH/s then reboot
wait 5 minutes check again to see if hashrate is below 400GH/s? if good, wait another 5 minutes then repeat.

Thanks!! Great App, Keep up the 'Awesome Work'!!

Yes, of course I can help you with that.

Just a quick question - is this a stand alone ASIC that you connect to as an External Miner in Awesome Miner (Cgminer running on the actual ASIC device)? If that is the case, it will not possible to reboot, only restart the mining process.

Also, Is there any specific reason the app won't install on a VM image of windows 7??

I've sent you an e-mail about this. We can continue the fault isolation by mail.

[fire000]

okay hopefully knows how do this on an s1 lol  I am on cg miner version 4.3.2a   what I am trying to do is get the API up and running on them to allow for a 3rd party software to control them etc a pool hopper.....    <<<<<<   I can get the api to send BUT not receiver any one have a clue how to get the api to receive on the s1 ants 

[fire000]

if anyone ever needs to gain full api control over an ant this guide does the trick http://coinmyne.proboards.com/thread/189/enable-full-privilege-api-antminer

[patrike]

fire000 - Great that you found the answer how to enable the Antminer API. I hope you enjoy the software

[montyfd]

if anyone ever needs to gain full api control over an ant this guide does the trick http://coinmyne.proboards.com/thread/189/enable-full-privilege-api-antminer

Have you tried that on a S3? For me it does not work :-(

[patrike]

Patrike, I am attempting to install the latest Awesome Miner Remote Service.  I have completely uninstalled the previous version.
Using Win 7-64.  The installation hangs as it is attempting to start services it then has a popup that says that the IntelliBreeze Software Maintenance Service failed to start.  Please advise.

I will try to reproduce this problem and get back to you. Is the Windows user you are running as an Administrator?

Just to follow up on this topic. We found out that Microsoft .NET Framework 4.5 wasn't installed. The installer doesn't inform about this,  only that the service failed to start as part of the installation.

[4x13]

Patrike,

From what I can tell, the commands exist inside the API to reboot the machine, as well as restart CGMiner. I am running the units in privileged mode, so controlling the units should not be an issue.