colinfx
|
|
September 04, 2014, 09:42:40 AM |
|
V2.0.0.18 is working brilliantly after 16 hours of constant use!
I've been using advanced ping pong since 2.0.0.18 and the main issues I find are:
1) When selling, allow the sale of the remaining quantity if there is not enough coins to fill the sell block. Without this fix, I end up bagholding a part filled order for each coin which I need to manually sell. 2) When the internet connection drops (even for just a few seconds), I have to set the trader settings from new as connection is aborted. I tried just pressing "Start" but I am told there is not enough QTL.
These are the biggest issues right now!
|
|
|
|
GiftEncounter
Member
Offline
Activity: 89
Merit: 10
http://lisk.io
|
|
September 04, 2014, 09:44:11 AM |
|
V2.0.0.18 is working brilliantly after 16 hours of constant use!
I've been using advanced ping pong since 2.0.0.18 and the main issues I find are:
1) When selling, allow the sale of the remaining quantity if there is not enough coins to fill the sell block. Without this fix, I end up bagholding a part filled order for each coin which I need to manually sell. 2) When the internet connection drops (even for just a few seconds), I have to set the trader settings from new as connection is aborted. I tried just pressing "Start" but I am told there is not enough QTL.
These are the biggest issues right now!
I'm looking forward to this one, Markus said he's implementing this soon.
|
LISK Develop Decentralized Applications & Sidechains in JavaScript with Lisk!
|
|
|
Reese212
|
|
September 04, 2014, 09:45:42 AM |
|
cool, seems like stop-limit altcoin works now for me with the higher cycle times, thanks for the tip colinfx!
unfortunately not for a long time, the trader stops working with the error "your quatloo-balance is too low" ;-( using 2.0.1.8 @ bittrex with more than 3000QTL.
@Markus is there a chance to implement a cycle to check the QTL balance every 30minutes or so? This way the trader would stop working (for whatever reason) but after these 30min it would check again and begin working again.
EDIT: just seen colinfx' post: that is very likely my problem, my internet connection drops sometimes a day...maybe because of this the error "not enough QTL balance" appears
|
Dear Lord, please grant me the ability...
|
|
|
colinfx
|
|
September 04, 2014, 10:13:50 AM |
|
cool, seems like stop-limit altcoin works now for me with the higher cycle times, thanks for the tip colinfx!
unfortunately not for a long time, the trader stops working with the error "your quatloo-balance is too low" ;-( using 2.0.1.8 @ bittrex with more than 3000QTL.
@Markus is there a chance to implement a cycle to check the QTL balance every 30minutes or so? This way the trader would stop working (for whatever reason) but after these 30min it would check again and begin working again.
EDIT: just seen colinfx' post: that is very likely my problem, my internet connection drops sometimes a day...maybe because of this the error "not enough QTL balance" appears
I suspect your internet connection is dropping intermittently. A disconnect at the time of your cycle disables the app from working and the QTL balance is not rechecked, you have to restart the app. This fix is in progress
|
|
|
|
MarKusRomanus (OP)
Legendary
Offline
Activity: 910
Merit: 1000
|
|
September 04, 2014, 12:20:22 PM |
|
cool, seems like stop-limit altcoin works now for me with the higher cycle times, thanks for the tip colinfx!
unfortunately not for a long time, the trader stops working with the error "your quatloo-balance is too low" ;-( using 2.0.1.8 @ bittrex with more than 3000QTL.
@Markus is there a chance to implement a cycle to check the QTL balance every 30minutes or so? This way the trader would stop working (for whatever reason) but after these 30min it would check again and begin working again.
EDIT: just seen colinfx' post: that is very likely my problem, my internet connection drops sometimes a day...maybe because of this the error "not enough QTL balance" appears
I suspect your internet connection is dropping intermittently. A disconnect at the time of your cycle disables the app from working and the QTL balance is not rechecked, you have to restart the app. This fix is in progress This was originally an implementation to avoid certain types of hacks/cracks that could bypass the QTL holding requirements. I may do it a different way to avoid the app purposefully breaking itself.
|
|
|
|
MarKusRomanus (OP)
Legendary
Offline
Activity: 910
Merit: 1000
|
|
September 04, 2014, 12:21:46 PM |
|
A few of the fixes talked about here are going to be implemented. It will be a couple of days as I will not release another build until big additions are complete. next version is 2.0.2.0
|
|
|
|
WarrEagle
|
|
September 04, 2014, 02:19:22 PM |
|
That's actually a good thing. Too many fools were running their bots on 5 and 10 second intervals. At least now everyone has a chance to get in the action a little easier.
|
DELETED
|
|
|
GiftEncounter
Member
Offline
Activity: 89
Merit: 10
http://lisk.io
|
|
September 04, 2014, 02:21:15 PM |
|
That's actually a good thing. Too many fools were running their bots on 5 and 10 second intervals. At least now everyone has a chance to get in the action a little easier. I'm up to 30+ seconds now the macro I posted earlier is easily edited though
|
LISK Develop Decentralized Applications & Sidechains in JavaScript with Lisk!
|
|
|
Reese212
|
|
September 04, 2014, 03:02:47 PM |
|
cool, seems like stop-limit altcoin works now for me with the higher cycle times, thanks for the tip colinfx!
unfortunately not for a long time, the trader stops working with the error "your quatloo-balance is too low" ;-( using 2.0.1.8 @ bittrex with more than 3000QTL.
@Markus is there a chance to implement a cycle to check the QTL balance every 30minutes or so? This way the trader would stop working (for whatever reason) but after these 30min it would check again and begin working again.
EDIT: just seen colinfx' post: that is very likely my problem, my internet connection drops sometimes a day...maybe because of this the error "not enough QTL balance" appears
I suspect your internet connection is dropping intermittently. A disconnect at the time of your cycle disables the app from working and the QTL balance is not rechecked, you have to restart the app. This fix is in progress This was originally an implementation to avoid certain types of hacks/cracks that could bypass the QTL holding requirements. I may do it a different way to avoid the app purposefully breaking itself. Ah ok i see your point, that makes sense! And thank you for working on a fix for that, hopefully this could work without breaking your security rules. Otherwise I need to start thinking connecting a SIM card to my computer, load it up with some data-volume, installing a directional antenna et voilà, having a non-stop internet connection :-D
|
Dear Lord, please grant me the ability...
|
|
|
darkproton
|
|
September 04, 2014, 04:01:50 PM |
|
I want to extend my most heartfelt congratulations on this project! I just started using this software yesterday and can say without a doubt that it is truly unique and a pleasure to use! I fucking love this thing!!!!!!!!!!!! Thanks for all the hard work. It is very, very , very apreciated.
|
|
|
|
colinfx
|
|
September 04, 2014, 04:20:41 PM |
|
I want to extend my most heartfelt congratulations on this project! I just started using this software yesterday and can say without a doubt that it is truly unique and a pleasure to use! I fucking love this thing!!!!!!!!!!!! Thanks for all the hard work. It is very, very , very apreciated.
Totally agree! It is AWESOME!
|
|
|
|
MarKusRomanus (OP)
Legendary
Offline
Activity: 910
Merit: 1000
|
|
September 04, 2014, 04:31:59 PM |
|
I want to extend my most heartfelt congratulations on this project! I just started using this software yesterday and can say without a doubt that it is truly unique and a pleasure to use! I fucking love this thing!!!!!!!!!!!! Thanks for all the hard work. It is very, very , very apreciated.
Thank you! hey, we're just getting started!
|
|
|
|
Dusty11
|
|
September 04, 2014, 04:39:09 PM |
|
Yeah still using it every day. Great job so far. Surprised its not more popular yet but I guess it hasn't been promoted much.
|
|
|
|
3angle
Full Member
Offline
Activity: 224
Merit: 100
keymaker
|
|
September 04, 2014, 10:07:16 PM |
|
Yeah still using it every day. Great job so far. Surprised its not more popular yet but I guess it hasn't been promoted much.
+1
|
|
|
|
WarrEagle
|
|
September 04, 2014, 10:17:32 PM |
|
One suggestion, save settings or setup coin profiles...timings, check boxes. Each time the program closes it seems to only remember the market. A coin profile would be pretty radical...since some coins we trade in the tens or hundreds or thousands. So having your place to ask/min and place to bid/min and timing for API calls would be a really cool feature and simple to code.
|
DELETED
|
|
|
colinfx
|
|
September 04, 2014, 11:12:04 PM |
|
One suggestion, save settings or setup coin profiles...timings, check boxes. Each time the program closes it seems to only remember the market. A coin profile would be pretty radical...since some coins we trade in the tens or hundreds or thousands. So having your place to ask/min and place to bid/min and timing for API calls would be a really cool feature and simple to code.
+1
|
|
|
|
GiftEncounter
Member
Offline
Activity: 89
Merit: 10
http://lisk.io
|
|
September 05, 2014, 01:51:18 AM |
|
One suggestion, save settings or setup coin profiles...timings, check boxes. Each time the program closes it seems to only remember the market. A coin profile would be pretty radical...since some coins we trade in the tens or hundreds or thousands. So having your place to ask/min and place to bid/min and timing for API calls would be a really cool feature and simple to code.
+1 This combined with my earlier suggestions would be very powerful: █ Multiple Market Tabs per Exchange so that we don't have to run multiple copies of the app. Bittrex allows 60 API requests per minute as well as multiple bots running on multiple markets for a single IP address/account, so this is not a problem. 6-10 market tabs per exchange would be sufficient (e.g. 6-10 bots running 2 orders each spread across a second range, that is what I achieve with macros and a dozen copies of the app running). █ Ability to set bids at a percentage lower than the top bid instead of a satoshi count lower. Also for that bid to automatically update to always reflect that % lower than current top bid. At the moment the user has to keep manually recalculating what e.g 2% lower is in satoshis for each coin that they automatically trade.
|
LISK Develop Decentralized Applications & Sidechains in JavaScript with Lisk!
|
|
|
interupted
|
|
September 05, 2014, 03:37:48 AM |
|
Bittrex is going to start limiting trades though.
|
|
|
|
GiftEncounter
Member
Offline
Activity: 89
Merit: 10
http://lisk.io
|
|
September 05, 2014, 03:40:13 AM |
|
Bittrex is going to start limiting trades though.
Even with those you will still be able to use at least 6 bots on 6 different markets at the same time.
|
LISK Develop Decentralized Applications & Sidechains in JavaScript with Lisk!
|
|
|
RonMank
|
|
September 05, 2014, 03:42:27 AM |
|
How is the updates going on the trader? I see some big potential in growth, not only on the coin side, but the trading software too. A few friends and I have begun testing this software, its beyond what we expected. However, I hope the developer can 'develop and update the coin, develop and update the trader, bring in awareness through channels of advertisements, and continue to answer questions/community development.' I am not hearing any feedback from the developer about awareness.
Having a great technology is one thing, growing the awareness of the technology is another.
The more user downloads = the higher the demand for QTL on the market
How do you plan to expand the growth and awareness of the software dev? How many user downloads (Estimated) has trader software produced thus far?
|
|
|
|
|