Patrike,
your build-in GPU clocking feature. Does it support more than 8+ Cards over the Afterburner Remote?
I want to upgrade my rigs to more cards, but need to be sure I can somehow clock them all. Afterburner only can clock 8 cards and NViadia Inspector cant handle Voltage and Fans for the new RTX cards.
Awesome Miner clocking will be more like nVidia Inspector in this case, but for both AMD and nVidia of course. Currently also with the limitation of Voltage and Fan speed not possible to set on nVidia 2000-series. nVidia redesigned their 2000-series API support and it looks like MSI Afterburner uses nVidia features not known to anyone else to be able to set the fan on these cards. I will investigate a bit more for solutions here, but it may take a little while before it becomes public knowledge how to set the fan properties on the 2000-series. Please also see the PM I sent you. |
|
|
|
You would not want to consider integration with MiningRigRenals on the same as with Nicehashe? It would be very cool, a complete package of all mining))).
Awesome Miner actually had some basic support for MRR many years ago, but it was removed because it didn't work perfectly and it wasn't many users using it anyway. Is MRR popular these days? I've not used it myself since 2014. |
|
|
|
|
Awesome Miner version 6.1.4
Features
- Coin Exponential Factor configurable in the Coin Properties dialog. Most coins uses a factor of 0, 13 or 32, but there are exceptions.
Mining software
- Added mining software: TT-Miner
Corrections
- Grin revenue calculation required another change to the exponential factor
- Correction to Gminer CuckaRoo29 (Grin) command line generated by Awesome Miner
- Pool export data was missing a few properties
|
|
|
|
Hey Patrike , --ssl 1 WORKED  I can see temps and power etc, but still can't see profitability All zeroes .... THank You There are currently two limitations with Beam mining 1) Once Beam is listed on one of the coin statistics sources with exchange rate and coin details, it will automatically show up in Awesome Miner with revenue information. 2) When using Gminer with Equihash 150,5 (Beam) - the number of accepted shares are always reported as zero from the mining software, while all other algorithms works fine. |
|
|
|
Somehow i can't see anything except "mining" on gminer_1_20_minimal_windows64_1 which AM downloaded. Mining Beam on Leafpool I only see MINING, and no GPU temps, or speed or anything  Where i am wrong Thanks Can you share the API report (toolbar: Tools -> API Report) for then miner when it's running? The Diagnostics output for this miner can also be of interest. Most likely something makes Gminer report empty API data here. I see now I was using LOL miner, for AMD, 0.7, and AM have 0.6 only. maybe this was problem. And problem with Gminer on NV was i cant start mining, getting "connection error:end of file" in miner... Algorithm: Equihash 150,5 "Beam-PoW"
Stratum server:
host: stratum://beam-eu.leafpool.com:4444
user: 228c2c2bec1f05833c7795948f57e46a2b8c6b6a3416fe8cf8e71af3bc930494b58.nv1
password: x
Power calculator: on
Color output: on
Watchdog: off
API: http://127.0.0.1:4028
Log to file: off
Selected devices: GPU0 GPU1 GPU2 GPU3 GPU4 GPU5
Temperature limits: 90C 90C 90C 90C 90C 90C
------------------------------------------------------------------
00:37:11 Connected to beam-eu.leafpool.com:4444
00:37:11 Connection Error: End of file When i point AM to my .bat it is mining OK, but on other port and AM cant detect it.... I tried a lot of miners and a both MAD and NV machines, and i dont know anymore what is working and what not I know that LOL 0.7 for AMD works but not detects anything THanks It looks like this pool requires Gminer to connect with SSL - but I couldn't find that in the pool instructions. Please open the Managed Miner properties and go to the Command Line section, where you add: --ssl 1 Another option is to add this command line to the Pool itself if you only mine it using Gminer. |
|
|
|
Any way to stop awesome miner from creating firewall rules for every mining software?
I don't want everyone on my LAN to have access to the mining software on my miners.
Local connections usually work even if you don't allow the program, is there any particular reason for awesome miner to create firewall rules?
There are currently no setting to prevent this behavior in Awesome Miner. Awesome Miner is registering the mining software as an allowed application. Mining software must be able to make outgoing pool connections and also open an API port where Awesome Miner connects for monitoring information. If an application isn't registered to the Windows firewall it may be blocked and Windows almost always shows a dialog where the user must accept the application. If you try to start almost any mining software outside of Awesome Miner (a software that Awesome Miner didn't register already) you will see that Windows Defender Firewall will show a warning dialog - unless Defender is completely disabled. In Windows Defender Firewall you also have a setting called "Block all incoming connections, including those in the list of allowed apps". That might be the one you are looking for in your specific scenario. As for the inbound rules, I understand is good to have them to prevent the popups but there is no need to have them as "allow the connection" rules, because the monitoring connections are local we could have them as "block the connection" rules and the monitoring would still work correctly(as far as I have tested over the years) without allowing other LAN devices access to the mining software. The "Block all incoming connections, including those in the list of allowed apps" might seem enough for most use cases but I have mining computers that serve other content so I need access to some of their ports. Please consider adding an option so we can decide whether to create the rules as allow or block rules, thank you. Can this be solved by using the setting to block all incoming connections, but then explicitly configure Windows Defender to open up a few ports that you need? Even if you only monitor mining software locally, Windows will still complain and show the Blocked dialog when you launch the mining software unless it's an allowed application. This is the reason why Awesome Miner adds the mining software as allowed as it's very difficult to run mining operations without it. |
|
|
|
Patrike,
Can you please clear up a few things that were included in a recent update 6.1.2.
How new is the asicfw.io site? I ask because the forum is completely empty.
AsicFW somewhat lead us to believe that awesomeminer is their software, but "Intellbreeze Software AB" is not mentioned anywhere on their site. I.E. (Monitoring system is compatible with our firmware Awesomeminer.com)
Are you a part of asicfw?
Awesome Miner supports reading the Power Usage values in the AsicFW API output and uses that value for display from version 6.1.2. I've been in contact with the AsicFW team over the last two weeks to ensure this feature works well. I'm running the company IntelliBreeze Software AB that is developing Awesome Miner and AsicFW is not part of this business. I think that it's just a grammar thing with the statement you refer to. "Monitoring system is compatible with our firmware Awesomeminer.com" should probably be interpreted: "Monitoring system is compatible with our firmware: Awesomeminer.com", to indicate that Awesome Miner is compatible with their firmware. I don't think they intended to claim that Awesome Miner is their product. |
|
|
|
Hi Patrike ! I have an issue with Bminer 12.2 and sparkpool with Grint It works correctly with my bat file : bminer.exe -uri cuckaroo29://myaddress@gmail.com%%2Frig_123@grin.sparkpool.com:6666 But in AM I can't managed to get it working correctly. This is the command sent. bminer.exe -uri cuckaroo29://myaddress@gmail.com%%2Frig_123:x@grin.sparkpool.com:6666 -watchdog=false -api=0.0.0.0:4028 And this is the result > invalid value "cuckaroo29://myaddress@gmail.com%%2Frig_123:x@grin.sparkpool.com:6666" for flag -uri: parse cuckaroo29://myaddress@gmail.com%%2Frig_123:x@grin.sparkpool.com:6666: invalid URL escape "%%2" Could you take a look at this ? Thx ! Thanks for the very detailed report. I think Awesome Miner is getting confused about '@' in both the mail address and before the server name. Edit: What are this part "%%2" indicating? Having double % is not allowed in the URL and the reason it works from the batch-file is that %% is being translated into a single %. Can you please check this part? |
|
|
|
Somehow i can't see anything except "mining" on gminer_1_20_minimal_windows64_1 which AM downloaded. Mining Beam on Leafpool I only see MINING, and no GPU temps, or speed or anything Where i am wrong Thanks Can you share the API report (toolbar: Tools -> API Report) for then miner when it's running? The Diagnostics output for this miner can also be of interest. Most likely something makes Gminer report empty API data here. |
|
|
|
Regarding the Beam profit calculation, I tried to set up a custom coin and the profit is off by like 800 times. I've done this many times with other coins so I think I know what I'm doing. For example, right now the difficulty is 73,000,000 (roughly), which is correct based on a 60 second block time, price is 81 cents, and my hash rate is 22 sols/s. The resulting profit is $0.0022 per day, while it should be between $1.50 and $2. Can anyone see what I am doing wrong? Using Bminer 1.18.
There is another concept called "exponential factor" that can impact the coin calculations. Awesome Miner doesn't expose this in the user interface. Most coins use a factor of 0, 13 or 32, but there are exceptions. The next release will have an adjustment for this for Beam. Can you please check if it resolves the calculation problem? Later on I will also make this exp. factor a configurable setting in the Coin Properties. The new version seems to calculate Beam profit correctly. Thanks! Although Beam works fine now, since a few hours ago the Grin calculations are off again. I was just notified by one of the coin statistics provider about this change. I will need to adjust this in the next update. |
|
|
|
|
Awesome Miner version 6.1.3
User interface
- Added additional coin icons
Integration
- WhatToMine integration will force HTTPS connections
Mining software
- Gminer Cuda Miner 1.20, including support for CuckaRoo29 (Grin)
- PhoenixMiner 4.1c
- NBMiner 13.2, including support for CuckaRoo29 (Grin)
- XMRig miner 2.9.3 for AMD, nVidia and CPU
- BMiner 12.2
Corrections
- Grin and Beam revenue calculation required changes to the exponential factor
- Ethereum mining corrections to NBMiner (dual mining is however not yet supported)
|
|
|
|
Patrike, for BEAM and such coins and if no statistics provider will provide the prices. Is it possible to use in that case https://coinmarketcap.com/ as the final try until the other providers are up to date? It's probably a good idea to support exchange rates via coinmarketcap.com. They can however not be a complete coin statistics provider like the others as they don't provide block reward, difficulty and so on which is also required to calculate the actual revenue from mining. |
|
|
|
Regarding the Beam profit calculation, I tried to set up a custom coin and the profit is off by like 800 times. I've done this many times with other coins so I think I know what I'm doing. For example, right now the difficulty is 73,000,000 (roughly), which is correct based on a 60 second block time, price is 81 cents, and my hash rate is 22 sols/s. The resulting profit is $0.0022 per day, while it should be between $1.50 and $2. Can anyone see what I am doing wrong? Using Bminer 1.18.
There is another concept called "exponential factor" that can impact the coin calculations. Awesome Miner doesn't expose this in the user interface. Most coins use a factor of 0, 13 or 32, but there are exceptions. The next release will have an adjustment for this for Beam. Can you please check if it resolves the calculation problem? Later on I will also make this exp. factor a configurable setting in the Coin Properties. |
|
|
|
any idea why I can't see my GPU stats ?
Reinstalled agent and miner still the same issue only on one miner
Are the GPU drivers the same? Can you please send me the Remote Agent log file for this system? It's especially during the startup of Remote Agent I would like to see what happens here. You will find the log file via the Remote Agent system tray icon. Thanks! |
|
|
|
Any way to stop awesome miner from creating firewall rules for every mining software?
I don't want everyone on my LAN to have access to the mining software on my miners.
Local connections usually work even if you don't allow the program, is there any particular reason for awesome miner to create firewall rules?
There are currently no setting to prevent this behavior in Awesome Miner. Awesome Miner is registering the mining software as an allowed application. Mining software must be able to make outgoing pool connections and also open an API port where Awesome Miner connects for monitoring information. If an application isn't registered to the Windows firewall it may be blocked and Windows almost always shows a dialog where the user must accept the application. If you try to start almost any mining software outside of Awesome Miner (a software that Awesome Miner didn't register already) you will see that Windows Defender Firewall will show a warning dialog - unless Defender is completely disabled. In Windows Defender Firewall you also have a setting called "Block all incoming connections, including those in the list of allowed apps". That might be the one you are looking for in your specific scenario. |
|
|
|
Hi Patrike,
BMiner works now on AMD too, but seems to have slightly different arguments, dunno exactly. If you have the time, please integrate into AM. Thanks
--------------
Is there any way to get a price for the BEAM coin? With the 0 price it wont work in profit switcher.
GMiner seems to not submit any accepted shares to AM (1.18 and 1.19). Is that possible somehow?
The AMD support is still listed as Experimantal for Bminer and it doesn't enable AMD mining unless you manually add a list of AMD devices to use. -devices amd:0 I assume that once this becomes more mature, it will work out-of-the-box Beam price information is unfortunately not yet supported. It will automatically show up once it's provided by any of the coin statistics providers. Gminer is always reporting 0 accepted shares whem mining Equihash 150,5. It works fine for all other algorithms as far as I can see. I've already reported this in the Gminer thread. Awesome Miner is simply displaying the value reported by Gminer. |
|
|
|
This is the other failure that I commented to you, that in some currency, in this case XSG, in console gives information of the hash, but then the miner does not give me neither profit, nor coins per day or anything. It is clearly seen in the capture.
Can you try the new troubleshooting feature where you right click on the miner and select View Details, and then in the profit switching tab you double-click on the line saying XSG? First thanks for the denarius info, I was going crazy, I have already hidden DNR from the list and I have left D I attached the XSG caption so you can see that you do not have data, you are mining at the time of capture More data, this started happening two updates ago, when you put order to the equihash and zhash numbers, in case it helps Thanks for the info. The coin is listed as Equihash144_5 here. Can you open the Properties of this pool and make sure you select XSG in the ZHash section and save the pool settings again? Just to make sure the pool doesn't reference some old XSG-Equihash144_5 entry. What you indicate I have it correct as you will see in the capture, but it still does not give profit when mining. It would be interesting to know if it happens to more people, or if you can play it yourself. To know if I am myself or we are all. Thanks for the details. But do you see XSG at the very bottom of the list of coins, for the ZHash algorithm? The fact that XSG still show up as Equihash 144.5 is because it used to be reported there. I assume you have the setting enabled to keep all old coins (Options dialog, Statistics Provider section, Keep coins even when no longer lited by provider), so that's the reason why it isn't removed automatically. On my system I get all those coins listed under the ZHash algorithm. |
|
|
|
Awesome Miner version 6.1.2
ASIC mining
- Support for AsicFW (custom firmware for Antminers) including display of Antminer power usage when running this firmware
hi, any additional info about this fw? how it works, how to install and so on? See the following link. Please note that this firmware has a dev mining fee. http://asicfw.io/So far I've just adjusted the monitoring implementation in Awesome Miner to support reading the Power Usage values they provide. thanks, and what formula do you use for Power drain calc? Awesome Miner is getting the Power reported in Watt reported from this ASIC firmware, so Awesome Miner is simply reading an value from the API response from this ASIC miner. I don't have any details on how they get this one on an ASIC. For GPU mining, it's instead Awesome Miner that uses the AMD and nVidia interfaces to get the current Power in watt. Awesome Miner will then calculate the number of kWh per day like: PowerUsagePerDayInKWH = Power (in Watt) * 24 / 1000 The profit is finally calculated like: ProfitPerDay = RevenuePerDay - ElecticityPricePerKWH * PowerUsagePerDayInKWH thanks, but if API do not report power usage, like bitmain fw. it shows 1300 Wt, by default? Awesome Miner actually have two modes in case the miner doesn't report the Power. By default you are correct that it will show the fixed value you have entered, for example 1300W. You can also use Linear scaling mode for the Power, where you define that at 12TH/s it's 1300W. If you have some batches running at 11TH/s and others at 12TH/s Awesome Miner will then show a lower / higher Power value based on the current hashrate. See: https://support.awesomeminer.com/support/solutions/articles/35000104685-power-usage-and-profitability |
|
|
|
Awesome Miner version 6.1.2
ASIC mining
- Support for AsicFW (custom firmware for Antminers) including display of Antminer power usage when running this firmware
hi, any additional info about this fw? how it works, how to install and so on? See the following link. Please note that this firmware has a dev mining fee. http://asicfw.io/So far I've just adjusted the monitoring implementation in Awesome Miner to support reading the Power Usage values they provide. thanks, and what formula do you use for Power drain calc? Awesome Miner is getting the Power reported in Watt reported from this ASIC firmware, so Awesome Miner is simply reading an value from the API response from this ASIC miner. I don't have any details on how they get this one on an ASIC. For GPU mining, it's instead Awesome Miner that uses the AMD and nVidia interfaces to get the current Power in watt. Awesome Miner will then calculate the number of kWh per day like: PowerUsagePerDayInKWH = Power (in Watt) * 24 / 1000 The profit is finally calculated like: ProfitPerDay = RevenuePerDay - ElecticityPricePerKWH * PowerUsagePerDayInKWH |
|
|
|
|
Show Posts
