Help pls !! I have 6 RX 570 gpus connected to the PC and they all are enabled and seemed to be working fine (Windows 10).. I want to save the bios of the 5th GPU, modify and flash it with ATI Flash.. When I open ATI flash, it only lists the first 3 GPUs.. No way to scroll down to the 5th..  How do i scroll down and save the bios of the 5th and flash it back? I do not want to unplug the other 5 from Mobo and do it.. It will screw up the already configured and working ones.. You should always BIOS flash cards in the primary 16x slot directly connected to the mobo, and should always be done individually before you try connect all the GPU's. never had to do this, I flash my cards in any slot even connected to risers no problem after reboot Never said you had to. Just a precaution to avoid bricking your card with a bad flash. I never did that.. I assumed its ok do flash while on riser.. And I add each GPU one by one and flash them and leave them on the slot.. So thats not a good practise? And there is no way to backup and flash the 5th card from atx flash? If there is no way, then I have to remove all other cards, boot to windows, flash the card, connect all cards back and I wouldnt have any card error or detection issues? Thanks You can flash cards beyond #4 using a command prompt window and using the command line version of ATI Flash utility. It is in the directory with the Windows version. |
|
|
|
Why is it 25% inflation for ESPERS? The coin count is already very high. Whats the rational behind 25%? You get 25% a year from the amount that is on your wallet. Sure when. I have been staking 1 million about two months and so far have got nothing. Make sure you have unlocked your wallet for staking, if its already encrypted. It has happend to me prevously. It has never been encrypted. Been staking just never gets a reward.  |
|
|
|
Why is it 25% inflation for ESPERS? The coin count is already very high. Whats the rational behind 25%? You get 25% a year from the amount that is on your wallet. Sure when. I have been staking 1 million about two months and so far have got nothing. |
|
|
|
Hi, im mining on ethermine pool with 5x580 with 140 stable hash reported, but effective sometime goes up but some more goes down and average is 125.
Its normal or I need to low memory or clock overclock?
btw incorrect shares are made for too much memory OC or just core? I got about 1 / each hour (NOT REJECTED)
Thanks
The effective hash rate varying quite a bit is normal as finding a share is based solely on luck. Over time it will average out to close to your real hash rate. Incorrect shares tend to be caused by memory overclocking. Overclocking the core too much will crash the gpu and/or your computer. Overclocking the memory too much can crash the gpu also. If you are getting incorrect shares a lot you are overclocking too much. |
|
|
|
Quick question. Is changing/tweaking the -dcri always advised? Will it increase the revenue? And for instance, could changing the dcri value not effect Eth mining but does increase Sia/LBRY/DCR? Or will it always decrease Eth mining if one of the dual mined coins increases?
It changes both values. Lower dcri higher ETH speed but lower second coin speed. You try to find the value where your card is mining both at a reasonable level. You will lose some ETH speed to get higher second coin speed. Second coins are low so it might not be worth the extra power to dual mine. I stopped dual mining and only mine ETH now. Plus it is much harder on the cards and could burn them out faster than normal. |
|
|
|
Warning: wallet wallet file dat read failure! The most important public key, private key data is no problem, but trading records or address book for more than it, or loss of data.
How to solve? Help!!
What is why you need to always keep a current back up(s) of you wallet.dat file. If it gets corrupted and you did not back it up you are SOL. |
|
|
|
Guys I am talking about the basics of the basics..  The latest wallet that I got from the website. have only Backup. no Import. I cannot find any where, in the wallet an option to do either: 1. Import it with public address + private key -> no such option 2. Import the wallet.dah file -> no such option So either I am stupid as fuck or the wallet is broken. If you have a wallet.dat file do this assuming you are running Windows 10. 1. Close the Espers wallet. Make sure it is not running. 2. Go to C:\Users\YOURDIR\AppData\Roaming\ESP 3. Rename wallet.dat to wallet.dat.bak. 4. Copy your desired wallet.dat file to the directory. 4. Restart Espers wallet and your old wallet will now be the one being used; if your wallet.dat file is valid. |
|
|
|
importprivkey <Espersprivkey> [label] [rescan=true] Adds a private key (as returned by dumpprivkey) to your wallet. (code -1) This is so weird. I can't import my address into the client?  Let me guess, old esp1? Version 0.8.6.7 Patch 0 alpha. I want to start staking but I see no option to import my address... Is that a joke Where should I do that? I see no options on this wallet.. If the wallet is unlocked and online it starts to stake after two hours. You will see a big, white up arrow. That means you are staking. But right now staking rewards is like a lottery and very few people get anything. They are supposed to be fixing the staking system to make it more equitable. I am not talking about staking. I am talking about the basics of blockchain wallets.. How do I import my address? without importing it, I wont be able to stake or even transfer, do any simple task.. What do you mean how do you import your address without importing it? That makes no sense. If you have a valid wallet.dat file just load the wallet.dat file. If you have the old ESP coins, version 1 they are useless and you cannot use the old private keys to do anything. |
|
|
|
importprivkey <Espersprivkey> [label] [rescan=true] Adds a private key (as returned by dumpprivkey) to your wallet. (code -1) This is so weird. I can't import my address into the client? Let me guess, old esp1? Version 0.8.6.7 Patch 0 alpha. I want to start staking but I see no option to import my address... Is that a joke Where should I do that? I see no options on this wallet.. If the wallet is unlocked and online it starts to stake after two hours. You will see a big, white up arrow. That means you are staking. But right now staking rewards is like a lottery and very few people get anything. They are supposed to be fixing the staking system to make it more equitable. |
|
|
|
Really have to thanks to Espers community. After i spread few bad words about Dev and espers price was down and i bought finally 30 million espers. So just wanna thank you all weak hands from here.  I love Espers and i always loved this project. And i can bet very soon Dev will release developments.  you must be one of the dumbest ppl on earth to buy in now you stupid think 8 sat is low.. and worse you think it is bc of you that coins drop price, you wont last long in CCland with that thinking. lol PPL have bought at 0.1 sat and less. better sell before you loose most your money while every coin drops lol I guess at 4 sat you will sell like a cry baby I must be a moron too. Just filled my bags at these prices. Even if goes lower I do not care because these cryptos are very volatile and it will bounce back up soon. All are down right now due to undertainty with BTC upcoming possible fork(s). |
|
|
|
Mr. Claymore, do you need my log file of crashed ETH mining with AMD Vega for bug fixing in your miners?
I tested your ZCash miner too, same issue.
It is not a bug. My miners do not support Vega yet. I will add it in 2-4 weeks, it requires much more than a few code lines. Is there any chance to add it to epools, its pool related parameter so it makes sense to be there i think...
Ok I will add it in next update (not in upcoming one). My wife is going to kill me if my vega cards sit idle that long! They say patience is a virtue, but that won't save my life! She has reasons! Why did you buy Vegas? Nobody has said that they are any good in mining. Gamer's edition and proper drivers will be available in a few months. On top of that, AMD specifically said they will do poorly at mining and were not designed for that purpose. The main purpose of Vega cards is AI, weather prediction, 3D rendering and other super specialized calculations and forecasting. |
|
|
|
May be it is simple...
But HOW to exclude first two of six cards from mining in latest versions of miner (v. 9.6 & more)?
Add switch "-di 2345" to the start.bat file. Cards 0 and 1 will not be mined. |
|
|
|
hi guys, I've been syncing for ~7 hours. Here's a screenshot:  Two questions: 1. Is it normal to only have 2-3 peers connected? 2. why is the chain structure percentage progress counted backwards? Taking several days to get the entire blockchain is normal. Just be patient. |
|
|
|
|
On your mining account set auto send to zero so the coins stay on the pool. If Cryptopia is working send them there. Or find someone you can trust and send the coins to their wallet. Have them send money to the site to buy an account and then once you have an account they can send the rest of the PASC to your new account. You can then mine to your new account with no more problems.
|
|
|
|
|
With 9.7 I got better Decred speed on my RX 460 card but overall speed for my GPU system on ETH is much lower and hashrates fluctuate wildly. Have gone back to 9.5.
|
|
|
|
Why I can't see my hashrate?
I'm dual mining shares are accepted but not a single info on hashrate from the miner...
How long have you waited? It takes about 15 minutes for them to show on the mining sites stats. If longer than that you probably did not change start.bat with your login/wallet info? |
|
|
|
I have been mining pascal from past 2 days continuously from 6 machines using nanopool dorectly to poloniex wallet and as per the nanopool they have paid me more than 30 PASC. But not even a single coin is showing under my poloniex account. I verified various places regarding the miner string and there seems to be no problem in that. Then why am I not getting the payout? I tried doing the same with Cryptopia but they says that wallet update needed so I'm unable tp generate the wallet address there. They also specifically says "Please do not mine directly to your Cryptopia addresses, We do not support generated transactions from pools like P2Pool etc." so does it mean that they do not support mining directly to wallet? Also for 3 days I mined pascal on my poloniex account at around 28th March 2017 and never faced any problem at that time. Please help me guys. I tried a lot.
Poloniex is having problems. Do not send any coins to a Poloniex acccount. You can mine coins to Poloniex as you are not paid until the coins are mature. But since Poloniex is having issues you will probably never get the coins you mined. Mine to Cryptopia or better to your own account. You cannot use P2Pool because new coins are generated directly and exchanges do not accept newly mined (created) coins. |
|
|
|
How long does it take to transfer pasc from a wallet to poloniex?
I transfered some PASC few hours ago still nothing on Poloniex.
Thanks,
with a correct payload it usually takes not longer than 1-2 hours. Did you change the checkbox for the payload to be unencrypted? The default is encrypted. If the payload is encrypted Poloniex will not be able to credit the coins to your account. if you forgot to select unencrypted the coins are most likely lost. You can contact Poloniex support but they have horrible support. |
|
|
|
Hello
A friend wanted to make a test of transfer of poloniex has its wallet pascalcoin
Transfer of 10 pasc
In poloniex complete ok
txid: 00000000765201005f0300004642414638454646433943413538374431343942
But no pascal received on his wallet. And poloniex no answer
And when I search for the txid number on the blockchain ca displays error.
Ideas?
thank you
Poloniex does this often. You have to file a support ticket. It will take over a month to get the transaction resubmitted to the network. It is okay to receive PASC to Poloniex but sending it out is a problem. If you search twitter for #poloniex, you'll see that this is happening for coins other than PASC as well. A txid is created, but not found on the block explorer. This happened to me too and I have an outstanding ticket that is 25 days old with no response. I filed a complaint with the Better Business Bureau (BBB) the other day, so I hope to hear something about it soon. Polo is very scammy lately, be cautious. It happened to me with PASC and it took Poloniex over a month to reply to my support ticket. They said they would resend the tx. They did but not for over two weeks after they said they would retransmit it. Poloniex support sucks. |
|
|
|
|
Show Posts
