🚀🚀🚀🚀 | GorillaBucks | Custom Multipool LIVE | Social Media Network | 💵🐵💵

[glax1983]

spots,

when I try to create local I have message "The local external IP is not yet detected.  Please try again in a few minutes."
And I wait, and wait...

Do I have to do some king of port triggering or something?

EDIT: now it works

[iGotSpots]

All coins requested for swap so far have been sent out


Two addresses with empty private keys:

B4WHdD9Cdk7SxTm8BXDRqDwVTzPWZuUuqE - 0
BDGBwehfszWH8sJ14g5D1aeNLmguAeTURz - 0

[fitimi]

All coins requested for swap so far have been sent out


Two addresses with empty private keys:

B4WHdD9Cdk7SxTm8BXDRqDwVTzPWZuUuqE - 0
BDGBwehfszWH8sJ14g5D1aeNLmguAeTURz - 0

But i sent you a mail and not getting my Gorrilabucks.

[dewalt]

Hello

I would like to know if I try to get my private key correct. When I type in dumpprivkey address and press enter I get this code on teeth and on mmxiv:  
17:21:02

Invalid TEETH address (code -5)


Any advise greatly appreciated.





Instructions for MMXIV, TEETH, VARY (GorillaBucks is further down)
Open the wallet of the coin you wish to turn into GorillaBucks
Copy addresses that have coins them and save these
Click Help -> Debug Windows and open Console tab
Type 'dumpprivkey address' without the quote
The output from this command is your Private Key
Copy Private Key from above and save for later
Open GorillaBucks 6.4.8.0 and generate a new address
Ensure valid address. This will be where new coins will be sent
Send an email to swap@GorillaStake.com with the above information
Please ensure your email is in the following format to help things move quickly
ALL INFORMATION MUST BE IN ONE MESSAGE OR IT WILL NOT BE SWAPPED


        Email Subject: MMXIV, TEETH, or VARY (Please Specify)
        Coin: MMXIV, TEETH, or VARY (Please Specify)
        Key: Paste your Private Key from above here
        Address: Paste your new GorillaBucks address here

[TimC]

All coins requested for swap so far have been sent out


Two addresses with empty private keys:

B4WHdD9Cdk7SxTm8BXDRqDwVTzPWZuUuqE - 0
BDGBwehfszWH8sJ14g5D1aeNLmguAeTURz - 0

I see that I have received three exchanges/payments but I did sent the info in for four coins. It looks like I have not receive my exchange for MMXIV. Unless a few payments are still being processed/sent out.

[MisterGreen]

Hello

I would like to know if I try to get my private key correct. When I type in dumpprivkey address and press enter I get this code on teeth and on mmxiv:  
17:21:02

Invalid TEETH address (code -5)


Any advise greatly appreciated.





Instructions for MMXIV, TEETH, VARY (GorillaBucks is further down)
Open the wallet of the coin you wish to turn into GorillaBucks
Copy addresses that have coins them and save these
Click Help -> Debug Windows and open Console tab
Type 'dumpprivkey address' without the quote
The output from this command is your Private Key
Copy Private Key from above and save for later
Open GorillaBucks 6.4.8.0 and generate a new address
Ensure valid address. This will be where new coins will be sent
Send an email to swap@GorillaStake.com with the above information
Please ensure your email is in the following format to help things move quickly
ALL INFORMATION MUST BE IN ONE MESSAGE OR IT WILL NOT BE SWAPPED


        Email Subject: MMXIV, TEETH, or VARY (Please Specify)
        Coin: MMXIV, TEETH, or VARY (Please Specify)
        Key: Paste your Private Key from above here
        Address: Paste your new GorillaBucks address here

Have you replaced "address" with your TEETH address when you've entered dumpprivkey in the debug console?

[Woody20285]

For Newbies like me - when you see

dumpprivkey address - copy and paste your receive coins address for the word "address"
If you have more than 1 receive coins address - do it for each

[illuSionRiDer]

@Spots

After swap done successfully now, what we're gonna do with MMX or Teeth in the old wallet?

[glax1983]

how long do I need to wait for gorillaband to get confirmed? It's bin like half an hour, and transaction is still Status: 0/offline, has not been successfully broadcast yet

[MoreBloodWine]

If the client is closed and reopened, say after a system reboot. One gets this (Error: could not allocate vin for collateralAddress) trying to "start" a band. Also, edit doesnt do anything... I'd like to edit an alias but can only do so from the Receive Coins area which doesnt translate over to the band area.

[fitimi]

All coins requested for swap so far have been sent out


Two addresses with empty private keys:

B4WHdD9Cdk7SxTm8BXDRqDwVTzPWZuUuqE - 0
BDGBwehfszWH8sJ14g5D1aeNLmguAeTURz - 0

But i sent you a mail and not getting my Gorrilabucks.

Just received my 2270.624071 BUCKS.

[dewalt]

Thanks for all the responses.

It works now.

Just new and thought just to type in dumpprivkey address

[iGotSpots]

Just so everyone sees that I'm not staking, you can verify the network coin supply yourself using getinfo:

moneysupply" : 1000000.00000000

The first stakes should be in exactly two hours (when the first wave of swap payments that went out will become mature)

[MoreBloodWine]

Edited last reply to show "error" when trying to start a band. Also would love the edit button to work to change the alias.

[iGotSpots]

If the client is closed and reopened, say after a system reboot. One gets this (Error: could not allocate vin for collateralAddress) trying to "start" a band. Also, edit doesnt do anything... I'd like to edit an alias but can only do so from the Receive Coins area which doesnt translate over to the band area.

Repairwallet, delete band, and try again. I'm sure the network is flooded with TX right now

[MoreBloodWine]

If the client is closed and reopened, say after a system reboot. One gets this (Error: could not allocate vin for collateralAddress) trying to "start" a band. Also, edit doesnt do anything... I'd like to edit an alias but can only do so from the Receive Coins area which doesnt translate over to the band area.

Repairwallet, delete band, and try again. I'm sure the network is flooded with TX right now

Shouldnt it just resolve it self after time ?

[iGotSpots]

For the record, I estimated about 5 hour turnaround time and first payments went out exactly 5 hours after snapshot was taken. It was totally an accident I didn't even notice until right now, but my estimate was perfect, within 20 seconds lol

[m4xp0w3r7]

where is manual for swap?

why it is not in OP?

[iGotSpots]

How to get GorillaBucks

The time.. has arrived. You are about to participate in the largest blockchain coin swap in history of digital currencies. In about an hour, we will be entering the phase where GorillaBucks becomes the main focus of everyone's attention. To participate in the swap will be simple and the ratios will be posted when the snapshot is taken in about an hour. With expansion comes innovation, and the culmination of these past developments have resulted in our coins being passed up in technology. While my intended focus is promotion and marketing, I have not had the time to do that recently with so much behind the scenes work going on. We've finally reached a point, both in the health of our community, and the actual businesses involved, where it's time to transition into the marketing phase

I have set aside the entire day to hang out in the chatbox on https://gorilla.exchange
If I am AFK when you come in, ask your question and I will respond as soon as possible
Feel free to hang out in there to follow progress. I won't ban you for your opinions, don't worry  

Instructions for MMXIV, TEETH, VARY (GorillaBucks is further down)

• Open the wallet of the coin you wish to turn into GorillaBucks
• Copy addresses that have coins them and save these
• Click Help -> Debug Windows and open Console tab
• Type 'dumpprivkey address' without the quote
• The output from this command is your Private Key
• Copy Private Key from above and save for later
• Open GorillaBucks 6.4.8.0 and generate a new address
• Ensure valid address. This will be where new coins will be sent
• Send an email to swap@GorillaStake.com with the above information
• Please ensure your email is in the following format to help things move quickly
• ALL INFORMATION MUST BE IN ONE MESSAGE OR IT WILL NOT BE SWAPPED

       Email Subject: MMXIV, TEETH, or VARY (Please Specify)
       Coin: MMXIV, TEETH, or VARY (Please Specify)
       Key: Paste your Private Key from above here
       Address: Paste your new GorillaBucks address here


Instructions for BUCKS (Please read first)

• Open the old GorillaBucks wallet
• Copy addresses that have coins them and save these
• Click Help -> Debug Windows and open Console tab
• Type 'dumpprivkey address' without the quote
• The output from this command is your Private Key
• Copy Private Key from above and save for later
• Close original GorillaBucks wallet and rename Roaming/GorillaBucks
• Suggestion is Roaming/GorillaBucksOld (in case backups are needed)
• Roaming/GorillaBucks must be empty prior to running BUCKS for the first time
• • If you mess this up, it's fine, just start from the beginning since you backed up the original
• Open GorillaBucks 6.4.8.0 and generate a new address
• Ensure valid address. This will be where new coins will be sent
• Send an email to swap@GorillaStake.com with the above information
• Please ensure your email is in the following format to help things move quickly
• ALL INFORMATION MUST BE IN ONE MESSAGE OR IT WILL NOT BE SWAPPED

       Email Subject: Original GorillaBucks
       Coin: Original GorillaBucks
       Key: Paste your Private Key from above here
       Address: Paste your new GorillaBucks address here

Keeping this important information on the newest page

where is manual for swap?

why it is not in OP?

If you ever have questions, please click my name on the left and look through my post history. Chances are I've answered it before. I wrote a huge guide, please use it

[crypto4jan]

Email send:
Subject: MMXIV
MXXVI address: MfKEoRaZtiimFgxBVefCW77fktqsVvnZsV
Private Key from above MMXIV
My Bucks address: B7cV5wyMXv5ZXNAFe52bB2KoDd5AHX3Kyb

How long to process?