Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Husherig]

Anyone tried new versions with mixed rig? I have 3 470 and 3 480 and still see not everyone satisfied with.

I've got a mixture of 580's & 480's all running fine for about 3 hours now if that helps:

Aug 23rd blockchain driver
dualminer 10.0

eth/dcr

580 8gb pulse 22.2/675 Mh -dcri 31 150w (wont take a bios mod)
580 8gb red devil 30.4/946 Mh -dcri 31 130w
480 8gb nitro plus 29.2/937 Mh -dcri 31 110w
480 8gb nitro 30.4/851 MH -dcri 25 110w

what update you made with this? did you patch the aug 23 blockchain driver? what is your core and mem clock? so with the undervolt if you did? pls share. thanks

Could you give the link where i can download the patch for the aug 23 blockchain driver? Thank you.

[1714998684]

1714998684

[1714998684]

1714998684

[Yutard]

Marginally better hash rates with 1060's and 1070's.

Increase of 0.05 - 0.1.

So that is about 0.1 to 0.3% increase. How about the power consumption?

[dwdhu]

Hi,
please share your updated hashrate results here:
https://gpustats.com
Thank you!

[boregepco]

Hi,
I have a rig with a 6 RX480. When the miner strats one of my card is with a speed 24 Mh/s. If I stop mining with this card and if I enable mining a few sec later - the speed goes up - 29 Mh/s.
Why it can't start with a big speed?

[Husherig]

I found why i have issue jumping 1000 MHz to 1305 MHz gpu clock speed with the 23 aug blockchain driver, it is the AMD tool that switch the frequency 1000 MHz to 1305 MHz.
May be the solution is to turn off this AMD tool?

[AltScope]

...

...

580 8gb pulse 22.2/675 Mh -dcri 31 150w (wont take a bios mod)
580 8gb red devil 30.4/946 Mh -dcri 31 130w
480 8gb nitro plus 29.2/937 Mh -dcri 31 110w
480 8gb nitro 30.4/851 MH -dcri 25 110w

what update you made with this? did you patch the aug 23 blockchain driver? what is your core and mem clock? so with the undervolt if you did? pls share. thanks

Could you give the link where i can download the patch for the aug 23 blockchain driver? Thank you.

installed the driver from ati and used atikmdag patcher, then used afterburner to set each card to -48mv everything else is default



i need a usage monitor for atw though

[Husherig]

...

...

580 8gb pulse 22.2/675 Mh -dcri 31 150w (wont take a bios mod)
580 8gb red devil 30.4/946 Mh -dcri 31 130w
480 8gb nitro plus 29.2/937 Mh -dcri 31 110w
480 8gb nitro 30.4/851 MH -dcri 25 110w

what update you made with this? did you patch the aug 23 blockchain driver? what is your core and mem clock? so with the undervolt if you did? pls share. thanks

Could you give the link where i can download the patch for the aug 23 blockchain driver? Thank you.

installed the driver from ati and used atikmdag patcher, then used afterburner to set each card to -48mv everything else is default



i need a usage monitor for atw though

Ok, thank you for your reply, i see you use AB 4.4.0 beta 12, and you have 5 gpu's.
In my side i have 8 gpu's and i use AB 4.4.0. beta 15 and 16, may be i need to try AB 4.4.0 beta 12.

[fmz89]

Lol, why ppl stuck on msi afterburner setting,
Just go bios set to PEG
Use display on gpu 0, not on IGP, and afterburner setting being normal again
double speed dual mine lbc, nice improvement, bye nvidia ,

[sonerbo]

Can anybody give dual Exp+LBC mining power usage for a r9 380 When I mine dual my rig freezes (in -mode 1 no problem).  I have tree R9 380 and one 750watt PSU. İf its not  power issue ı will try something different .

[Coin++]

Congratulation Claymore for this new realase of you miner, number 10.0.
I will test it in the nexts days, with nVidia cards only (AMD cards use too much electricty power in my case).

Thank you very much, one more time :-).

[NoHash]

Can someone  with the blockchain aug23 release installed please check:

In device manager, under details for the driver, does it say 8/8/2017  22.19.659?

[platitude]

Can someone  with the blockchain aug23 release installed please check:

In device manager, under details for the driver, does it say 8/8/2017  22.19.659?

Yes, 08.08.2017 22.19.659.0

[NoHash]

Thanks

Strange that a 8/23 release has an 8/8 date

[jmigdlc99]

Thanks

Strange that a 8/23 release has an 8/8 date

Seems there isn't much quality control with AMD blockchain drivers lol. Is this the same as driver version 17.30.1029?

[NoHash]

Thanks

Strange that a 8/23 release has an 8/8 date

Seems there isn't much quality control with AMD blockchain drivers lol. Is this the same as driver version 17.30.1029?

Yes. Thats why i was questioning it.  The dates differ from the driver and the file

[SummersideGuy]

Anybody know if this means blockchain drivers work with Claymore 10 in Win 7 now?

No windows 7 is still an issue and for others asking about block chain driver 23/8 it is the same as 8/8 just added vega fe support

[pikatju]

Congratulation Claymore for this new realase of you miner, number 10.0.
I will test it in the nexts days, with nVidia cards only (AMD cards use too much electricty power in my case).

Thank you very much, one more time :-).

Cool let me know what you get! Especially if you have 1070 😂

[NavyCuda]

Yes. Thats why i was questioning it.  The dates differ from the driver and the fike

Seems there isn't much quality control with AMD blockchain drivers lol. Is this the same as driver version 17.30.1029?

Without going into to many details, the aug. 23 blockchain drivers were never supposed to exist.  The only difference is that Vega FE support was added to the blockchain drivers, then AMD changed their mind and decided to release them publicly, those are the Aug 23 drivers.  They are still the aug. 11(public release date) drivers.

[Branko]

I would be interested i knowing what people are getting with the 10.0 update for LBR with their 470,570,580, and 560 RX cards when dual mining

30.5mh eth + 90lbry with my sapphire nitro+ rx480 1170/2100@0.9v

15.1/31 on Gigabyte RX 560

[johndoe2]

When is the 4.4 Afterburner coming out?