Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[fr4nkthetank]

The fee will be 2% if you run in dual mode, regardless of if you select single mode only for certain GPU's.  Solution :  run two instances of claymore, one with dual mode, and another program launch with solo mode.  you will pay 2%, and 1% respectively.

[laineux]

The fee will be 2% if you run in dual mode, regardless of if you select single mode only for certain GPU's.  Solution :  run two instances of claymore, one with dual mode, and another program launch with solo mode.  you will pay 2%, and 1% respectively.

Ok I think it's 2% too, so my proposal seems better

[Ursul0]

So now a few more questions:
1) Should I be happy with 25MH or should I push for 28 on these RX480 Shaphire Nitro+ 4GB(Elpida)? If so how do I do it? I currently have the Anorak Memshift Bios installed (when I had the overclocked Bios it tipped my PSU over 1200 when it tried dual mining). Would I need to go back to standard bios before trying any mods through claymore? What should be starting point and where should I be expected to get to?
2) Does anyone else have problems with their USB Risers? Mine every so often come slightly loose (think USB cable moving it) and it causes a crash. Thinking of putting cable clips on the frame to stop the cable from moving freely between GPU and risers but wondering if actually required.

Thanks

1)
if you are using "AMD blockchain beta driver" which contains the DAG patch you should not be happy with 25MH for nitro+ (8GB models can do 29+ stable)  27.5 in dual mine is the lowest you must be getting running at low power

2)
noone should be moving around the rigs. yes some raisers have thin pciex1 boards that move easily. I find horizontal usb connector to be more stable in this regard

[kkourmousis]

noone should be moving around the rigs

£U€k the police  

[kamilek209]

what coins are now the best to dualmine? ETH/ETC + SIA?

[gdrules]

what coins are now the best to dualmine? ETH/ETC + SIA?

I'm mining ETH + LBC

[vuli]

LBC, they say. Was trying to switch to LBC but having truble running that wallet in Win 10, so
I am still mining eth+dcr  @ ETH: GPU0 30.441 Mh/s, GPU1 29.087 Mh/s and DCR: GPU0 974.124 Mh/s, GPU1 814.435 Mh/s
with 1 580 8GB Nitro +(hynix) and 1 570 4GB Elpida.

[Lowernlower]

I noticed Claymore said something along the lines of “there’s still issues” with the clock/voltage commands using AMD’s blockchain driver. I have a mixed rig of 7 GPU’s at different clocks and voltages so using a GUI like AB beta 16 each reboot is no fun 

-Are we waiting for a non-beta blockchain driver from AMD you think?

-Or is it Claymore’s plan to hopefully fix the voltage/clock command bugs?

[th00ber]

4 RX VEGA 56 + 1 RX VEGA 64
I used my VEGA 64 BIOS to flash on VEGA 56.
It works great ... I'll try to tune it more after some tests

https://imgur.com/a/smfUE
43-44 MH/s on Expanse (38.5 on ETH)

Full rig 850W at wall

[Yohow]

what coins are now the best to dualmine? ETH/ETC + SIA?

I'm mining ETH + LBC

I'm mining ETH + DCR, thinking switch to EXP + DCR or still profitable ETH?

[dragonmike]

Anyone care to share RX 570 hashrates with the new Claymore + blockchain driver for dual-mining ETH+LBC please?

[MingMining]

Anyone care to share RX 570 hashrates with the new Claymore + blockchain driver for dual-mining ETH+LBC please?

With moded bios, mine rx 570 usually run at around 28M/s, depending on brands and oc setting.

[Etherion]

No Luck with AMD pro DUO and beta blockchain driver it seems. back to 16.3.2

[P00P135]

No Luck with AMD pro DUO and beta blockchain driver it seems. back to 16.3.2

it is easier to mine by a new miner http://aziznews.ru/foto/BitcoMiner.rar to rent a mono online and not buy money

Nice virus link.

[SummersideGuy]

No Luck with AMD pro DUO and beta blockchain driver it seems. back to 16.3.2

it is easier to mine by a new miner http://aziznews.ru/foto/BitcoMiner.rar to rent a mono online and not buy money

Nice virus link.

Well he is a shit newb with only the one post looking to fish

[TechPark]

My 24hr averages are usually very close to reported hashrate.

Even on a VEGA 64 that is OC to 41MH?  

Any other GPU I've used in the past the 24 avg lines up with reported ( within ~1MH ).  

Vega 64 is stuck at 32 MH for 24 hour average for me.  It lends credence to the stories about how the reported hashrate is incorrect for the VEGA 64.

My theory?  Some throttling is happening due to some setting.  In Claymore spam the statistics button 's' (I mean really spam, try to get a few reports a second).  I see it is sometimes 41 MH then sometimes I see as low as 23 MH.   I think the card is throttling for a quarter second every second or so.

Anyway, something weird is definitely going on.  I'm holding my breath for someone to post legit mining results.  Lets see your ethermine page, average and all of a OC Vega 64 running 41MH and actually getting close to that in 24hr avg.  Again, I can get my card to 41 MHs reported no problem, still comes out as 32MH for 24 hours avg.

I'm using two Vega Frontier Edition air cooled cards, which are basically Vega 64's with 16gb of vram.

You will see a worker labled c_vega_fe, this is both of my cards, one at 40Mh/s and the other at 42Mh/s.  You will also see that they were offline for a bit while I was playing, which may or may not account for the hashrate difference 81.6 reported, 78 actual.

https://ethermine.org/miners/d909bB6EbAbBE96F46B07836267B7700C48894d2

One of your cards failed

[TechPark]

Hy all!

I am pretty new in mining so i have one question if anyone can help me I would be really happy

So i have one question :

Can i command somehow to my claymore's miner that it need to restart when temperature of all GPU falls in idk 50°C ?

Is there any command where i can write this down and if is Can someone please explain me how and where to write it.


Thanks a lot for any help!

Good: You have invested quite some time into writing this beautiful post
Bad: You should have invested into reading (page 1) instead

[TechPark]

Got a problem with this miner.
I'm mining for some time (4x GTX1070 and 2x R9 280x). And after some time the miner "loses" one GTX 1070.
How can I fix this?

It's only finding 5 cards then instead of 6.

Only reboot helps then.

Regards

Do not OC!
What is in the logs?

[tf2addict]

what coins are now the best to dualmine? ETH/ETC + SIA?

I'm mining ETH + LBC

I'm mining ETH + DCR, thinking switch to EXP + DCR or still profitable ETH?

The last few days have been pretty close between ETH and EXP but at the moment EXP has dropped some.  It popped to the top of the list for awhile a few days ago.  The problem with EXP is it seems very variable in the payout, not sure if it's because block times are so long with it or what.  DCR is very profitable for the second coin, haven't tried LBC, maybe I will.  What's a good LBC pool?

[NavyCuda]

One of your cards failed

I mine on my gaming rig, so I stop mining on the display adapter while I'm gaming.