Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[FFI2013]

Need help with direct mining of Nicehash pool(s) using Claymore Dual independently.


I downloaded Claymore Dual and wrote a .bat file that would connect my miner to the Nicehash Eth pool and the Nicehash Lbry pool.  To be perfectly clear, I am NOT USING Nicehash Legacy miner nor am I using Nicehash 2.x miner.  I am using Claymore's miner as a stand alone and pointing my rig at the Nicehash pools. 

Here is my command line:

Code:

EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal my btc wallet address -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://lbry.usa.nicehash.com:3356 -dwal my btc wallet address

Please note my btc wallet address is a Nicehash btc wallet.

Problem:  When I run this and the command window pops up, it shows the second pool as being a decred pool, and, the hashrate indicates a decred hashrate, not an Lbry hashrate. What gives?  I didn't run it long enough to see if shares were actually generated because I'm not interested in decred, and I'm pretty sure it's NOT mining Lbry, based on what I see.  This happens on both of my rigs.

Any help would be appreciated!
Thanks

your missing -dcoin lbc without the -dcoin command the miner will default to dcr as a second coin

[kriskarthik]

Suddenly one of the GPU isn’t detected by claymore. Getting below error

Code:

22:19:25:922	1f7c	NVML version: 9.388.00
22:19:25:962	1f7c	NVML API: failed to get device handle 5, error 15.
22:19:25:986	1f7c	NVML API: failed to get device handle 5, error 15.
22:19:25:996	1f7c	NVML API: failed to get device handle 5, error 15.
22:19:26:005	1f7c	NVML API: failed to get device handle 5, error 15.
22:19:26:015	1f7c	NVML API: failed to get device handle 5, error 15.
22:19:26:026	1f7c	NVML API: failed to get device handle 5, error 15.
22:19:26:035	1f7c	NVML API: failed to get device handle 5, error 15.

How can I fix this and get the GPU up n running ?

Any help to fix this please

[Moon2eth]

https://s1.postimg.org/6b7wma5m73/IMG_20171102_211839_-_Copy.jpg


I've been trying for a few hours and none of the undervolting options work. Overdriventool doesn't work. Wattman doesn't work. Afterburner beta 21/previous versions doesn't work. I've tried the Aug 23rd blockchain drivers and the latest 17.10.3 drivers.

Anyone *actually* got undervolting working on Windows 10?

My 580s now hash at a pathetic 21MH when it was previously hashing at 30MH. Power consumption with the old drivers is 650w vs 1000w+ on the DAG fix drivers.

[Vann]

I'm using the AMD blockchain drivers with Afterburner on Windows 10 Pro v1703 and it works fine. If you updated to the Windows 10 Fall Creators Update (v1709), that may be your problem as the blockchain drivers don't support the FCU.

[Moon2eth]

I'm using the AMD blockchain drivers with Afterburner on Windows 10 Pro v1703 and it works fine. If you updated to the Windows 10 Fall Creators Update (v1709), that may be your problem as the blockchain drivers don't support the FCU.

have you verified your actual power consumption with killawatt or gpuz?

which ab version are you using? and is it the aug 23rd driver?

i haven't updated it all. i just installed windows and disabled updates completely.

[Vann]

I'm using the AMD blockchain drivers with Afterburner on Windows 10 Pro v1703 and it works fine. If you updated to the Windows 10 Fall Creators Update (v1709), that may be your problem as the blockchain drivers don't support the FCU.

have you verified your actual power consumption with killawatt or gpuz?

which ab version are you using? and is it the aug 23rd driver?

i haven't updated it all. i just installed windows and disabled updates completely.

Yes, I have  a -100 mV undervolt and -15% power limit set in Afterburner on Windows v1703.

https://bitcointalk.org/index.php?topic=1433925.msg23930733#msg23930733

[Moon2eth]

Anyone else got undervolting working under Windows 10 with RX580s? What's your software setup?

[phuocduong]

not change hs with 10.0 version

[cas33]

Anyone tried new AMD 17.11. driver?

[wOvAN]

Anyone tried new AMD 17.11. driver?

works ok, to me

[smartieee]

Anyone tried new AMD 17.11. driver?

works ok, to me

Works for me as well, so far no freezes (I would have had a freeze by now with 17.10.2 and Win10 FCU).

[Vann]

Afterburner v4.4.0 final is still not working with the Crimson Relive 17.11.1 drivers on Windows 10 Pro v1703. Everything is grayed out. Back to the blockchain drivers again.

https://www.guru3d.com/files-details/msi-afterburner-beta-download.html

https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

[karim_hassan777]

hi every boody
now i get a new motherboard biostar b250btc and installed 5 rx 580 + 1 rx 570 but the problem when i install win 10 fcu + 17.10.3 then msi afterbuner any edition there is no option is enabled in afterburner i tried last editin 4.4 but same results
i tried many options but in vain and in order to use afterburner i used amd blockchain driver and the core voltage control is not enabled even when you enable it from the settings and the gpus is over heated
please advise me

now i noticed that in msi afterburner window ( Driver version ) is blank as if it was gpus not identified but in device manger it is defined
any help ? cpu used is celeron g3930
on the other rig motherboard gigabyte z170 + core i5-6500 is used and same software the only problem that core voltage is not activated in afterburner

[SnigglysMine]

Need help with direct mining of Nicehash pool(s) using Claymore Dual independently.


I downloaded Claymore Dual and wrote a .bat file that would connect my miner to the Nicehash Eth pool and the Nicehash Lbry pool.  To be perfectly clear, I am NOT USING Nicehash Legacy miner nor am I using Nicehash 2.x miner.  I am using Claymore's miner as a stand alone and pointing my rig at the Nicehash pools. 

Here is my command line:

Code:

EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal my btc wallet address -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://lbry.usa.nicehash.com:3356 -dwal my btc wallet address

Please note my btc wallet address is a Nicehash btc wallet.

Problem:  When I run this and the command window pops up, it shows the second pool as being a decred pool, and, the hashrate indicates a decred hashrate, not an Lbry hashrate. What gives?  I didn't run it long enough to see if shares were actually generated because I'm not interested in decred, and I'm pretty sure it's NOT mining Lbry, based on what I see.  This happens on both of my rigs.

Any help would be appreciated!
Thanks

your missing -dcoin lbc without the -dcoin command the miner will default to dcr as a second coin

Thank you. That fixed it.

[peter5slo]

https://s1.postimg.org/6b7wma5m73/IMG_20171102_211839_-_Copy.jpg


I've been trying for a few hours and none of the undervolting options work. Overdriventool doesn't work. Wattman doesn't work. Afterburner beta 21/previous versions doesn't work. I've tried the Aug 23rd blockchain drivers and the latest 17.10.3 drivers.

Anyone *actually* got undervolting working on Windows 10?

My 580s now hash at a pathetic 21MH when it was previously hashing at 30MH. Power consumption with the old drivers is 650w vs 1000w+ on the DAG fix drivers.

Try undervolting directly in Claymore.
Also, what finally worked for me is setting memory voltage equal to (or lower than) core voltage. When memory voltage was higher, core undervolt simply didn't work or stick.

[tg88]

Try undervolting directly in Claymore.
Also, what finally worked for me is setting memory voltage equal to (or lower than) core voltage. When memory voltage was higher, core undervolt simply didn't work or stick.

what is the average consumption in the 580? The best I can get is 94w checked in gpuz.

I'll try to undervolt via claymore.
 

[peter5slo]

Try undervolting directly in Claymore.
Also, what finally worked for me is setting memory voltage equal to (or lower than) core voltage. When memory voltage was higher, core undervolt simply didn't work or stick.

what is the average consumption in the 580? The best I can get is 94w checked in gpuz.

I'll try to undervolt via claymore.

94W in GPU-Z is quite good for dual mining (I have 96W for one 580 and 100W for another). ETH only should be below 80W. I run my cards at 825-875mV (both memory and core).

GPU-Z reports core consumption only, total wattage will be more (card memory, fans), about 140w at the wall (depending on power supply efficiency).

[AzzAz]

I'm using the AMD blockchain drivers with Afterburner on Windows 10 Pro v1703 and it works fine. If you updated to the Windows 10 Fall Creators Update (v1709), that may be your problem as the blockchain drivers don't support the FCU.

have you verified your actual power consumption with killawatt or gpuz?

which ab version are you using? and is it the aug 23rd driver?

i haven't updated it all. i just installed windows and disabled updates completely.

You tried to restart Claymore twice?

[tg88]

94W in GPU-Z is quite good for dual mining (I have 96W for one 580 and 100W for another). ETH only should be below 80W. I run my cards at 825-875mV (both memory and core).

GPU-Z reports core consumption only, total wattage will be more (card memory, fans), about 140w at the wall (depending on power supply efficiency).

unfortunately 94w eth only.
I'll try to do via claymore ... I was trying to overdriventool but without success.
 

[Maniac9331]

You guys had any problems mining on Dwarfpool with claymore?? i set up my .bat file on my miners (Nvidia gpu's) i see the miners and hash rates on dwarfpool web, but i see no personal shares nor graphs about the miners i left it 1 hour , everything works fine in claymore console , but on the web i see no profit no shares just my miners and hashrates. anyone know what might be wrong? i use 10.1 claymore and {EthDcrMiner64.exe -epool eth-us.dwarfpool.com:8008 -ewal 0xf4563559911922b5b1c43f587abcbd336b8c4afc/mineiac1 -epsw x -mode 1 -ftime 10 -r 1}
Thanks