[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[pbuva]

I ran it on a USB but it was slow. It was a USB 2. not 3 key. And not all USB 3 keys are equal. Fast USB 3 keys cost as much as a cheap SSD so I switched to SSD.

What you think about Kingston DataTraveler SE9 G2 16GB ?

[Ivan.eth]

My question is in the picture. What is the value in the field matches what graphics card in rig?

Link to picture:
http://jpegshare.net/37/01/3701f4fec3a1d0f7d1477abfef60c3f9.jpg.html

[xleejohnx]

My question is in the picture. What is the value in the field matches what graphics card in rig?

Link to picture:

First gpu is the first X1 slot on the board or x16 slot then it counts down

[ChaosGen]

Could someone please help me?

I'm trying to boot with SimpleMining OS, but it's not working. It stops with the following messages:

https://i.imgur.com/NX1uUWD.jpg
https://i.imgur.com/EJbRI7R.jpg

Could someone please explain what am I doing wrong? I've flashed the OS to a 16GB USB stick according to manual and inserted it into the rig.

I assume that the problem is not in the rig itself, since it is working finely with windows 10. I'm disconnecting the HDD on which the windows is installed, then putting in the USB drive and then booting. But no luck.

[cryptogastein]

Could someone please help me?

I'm trying to boot with SimpleMining OS, but it's not working. It stops with the following messages:

https://i.imgur.com/NX1uUWD.jpg
https://i.imgur.com/EJbRI7R.jpg

Could someone please explain what am I doing wrong? I've flashed the OS to a 16GB USB stick according to manual and inserted it into the rig.

I assume that the problem is not in the rig itself, since it is working finely with windows 10. I'm disconnecting the HDD on which the windows is installed, then putting in the USB drive and then booting. But no luck.

Hey,

look @ your BIOS.

UEFI settings have to be changed to "LEGACY Only", Also AHCI and EHCI have to be enabled, and if you have the setting in your BIOS the IMMOU Emulator.

this fixed tthe issue on my side.

[cryptogastein]

Details about 10 GPU on ASUS PRIME Z270-P

ETH - Total Speed: 291.283 Mh/s, Total Shares: 234, Rejected: 0, Time: 00:50
ETH: GPU0 28.438 Mh/s, GPU1 29.166 Mh/s, GPU2 28.939 Mh/s, GPU3 29.936 Mh/s, GPU4 28.957 Mh/s, GPU5 28.456 Mh/s, GPU6 29.877 Mh/s, GPU7 28.649 Mh/s, GPU8 29.526


1xSapphire 480 4G(Elpida)
7xGigabyte 480 4G(Hynix)
2xPowerColor 480 4G(Samsung)

4xPower 0.7kW

link to photo
https://yadi.sk/i/Uc92kR9d3GtFUw
test rig - not nice view

HELL YEAH.

I try since days to get the 1 to 3 Splitter getting working. If i unplug all and just the splitter with 1 cardc is inside, ,im stucking in a Boot-Loop and it kills his selfe with Kernel Panic.

Doenst matter if RX or R version.

could you give me some hints / Tips?

Board: GA-990FXA UD5 rev. 3

[realter]

Details about 10 GPU on ASUS PRIME Z270-P

ETH - Total Speed: 291.283 Mh/s, Total Shares: 234, Rejected: 0, Time: 00:50
ETH: GPU0 28.438 Mh/s, GPU1 29.166 Mh/s, GPU2 28.939 Mh/s, GPU3 29.936 Mh/s, GPU4 28.957 Mh/s, GPU5 28.456 Mh/s, GPU6 29.877 Mh/s, GPU7 28.649 Mh/s, GPU8 29.526


1xSapphire 480 4G(Elpida)
7xGigabyte 480 4G(Hynix)
2xPowerColor 480 4G(Samsung)

4xPower 0.7kW

link to photo
https://yadi.sk/i/Uc92kR9d3GtFUw
test rig - not nice view

HELL YEAH.

I try since days to get the 1 to 3 Splitter getting working. If i unplug all and just the splitter with 1 cardc is inside, ,im stucking in a Boot-Loop and it kills his selfe with Kernel Panic.

Doenst matter if RX or R version.

could you give me some hints / Tips?

Board: GA-990FXA UD5 rev. 3

need to see bios for mb.
dont have R version - cant try.
maybe try gen1,gen2?
try insert splitter in second x16.
send photos pls.

i have 2 splitter with problems(2 ports of 3 work). change splitter.

sorry for bad english.

[cryptogastein]

Details about 10 GPU on ASUS PRIME Z270-P

ETH - Total Speed: 291.283 Mh/s, Total Shares: 234, Rejected: 0, Time: 00:50
ETH: GPU0 28.438 Mh/s, GPU1 29.166 Mh/s, GPU2 28.939 Mh/s, GPU3 29.936 Mh/s, GPU4 28.957 Mh/s, GPU5 28.456 Mh/s, GPU6 29.877 Mh/s, GPU7 28.649 Mh/s, GPU8 29.526


1xSapphire 480 4G(Elpida)
7xGigabyte 480 4G(Hynix)
2xPowerColor 480 4G(Samsung)

4xPower 0.7kW

link to photo
https://yadi.sk/i/Uc92kR9d3GtFUw
test rig - not nice view

HELL YEAH.

I try since days to get the 1 to 3 Splitter getting working. If i unplug all and just the splitter with 1 cardc is inside, ,im stucking in a Boot-Loop and it kills his selfe with Kernel Panic.

Doenst matter if RX or R version.

could you give me some hints / Tips?

Board: GA-990FXA UD5 rev. 3

need to see bios for mb.
dont have R version - cant try.
maybe try gen1,gen2?
try insert splitter in second x16.
send photos pls.

i have 2 splitter with problems(2 ports of 3 work). change splitter.

sorry for bad english.

Thanks for the Hint.

on This Board i havent the possibility about gen1 and gen2.

have tested it also on a BIOSTAR TB85... Have 2 Splitters. i just got it to work 1 Time on the UD5 to detect 6 Cards. Stucked in OC, after that no more chance to get it up Also tryed all different Ports bla bla bla..... Funny thing is, i get different Errors

but i think the GA-990FXA is simply to old now for this fancy new things

I will ry it also on the Asrock Z97... perhaps it will work here.

But i will not fight till fix already have ordered 2 of the Z270 ^^ including 18 x RX 470

ANT EDIT: my Hashrate --> Claymore Dual with SIA, 5x XFX RX 470 Black Edition Elpida --> BIOS MOD

ETH - Total Speed: 135.225 Mh/s, Total Shares: 276, Rejected: 0, Time: 01:04
ETH: GPU0 27.850 Mh/s, GPU1 24.005 Mh/s, GPU2 27.930 Mh/s, GPU3 27.908 Mh/s, GPU4 27.533 Mh/s
SC - Total Speed: 1081.798 Mh/s, Total Shares: 247, Rejected: 3
SC: GPU0 222.798 Mh/s, GPU1 192.036 Mh/s, GPU2 223.439 Mh/s, GPU3 223.265 Mh/s, GPU4 220.260 Mh/s


Claymore Dual with SIA, 6x R9 290x Sapphire

ETH: 04/13/17-09:37:55 - New job from eth-eu.dwarfpool.com:8008
ETH - Total Speed: 178.659 Mh/s, Total Shares: 354, Rejected: 0, Time: 01:10
ETH: GPU0 30.128 Mh/s, GPU1 30.134 Mh/s, GPU2 29.591 Mh/s, GPU3 29.603 Mh/s, GPU4 29.602 Mh/s, GPU5 29.601 Mh/s
SC - Total Speed: 1429.265 Mh/s, Total Shares: 355, Rejected: 0
SC: GPU0 241.027 Mh/s, GPU1 241.068 Mh/s, GPU2 236.729 Mh/s, GPU3 236.820 Mh/s, GPU4 236.816 Mh/s, GPU5 236.805 Mh/s


Claymore Dual with SIA, 3x HIS RX 470 Elpida BIOS MOD + 1x XFX RX 470 Black Edition Elpida BIOS MOD

ETH: 04/13/17-09:39:05 - New job from eth-eu.dwarfpool.com:8008
ETH - Total Speed: 102.192 Mh/s, Total Shares: 2127, Rejected: 1, Time: 12:50
ETH: GPU0 23.102 Mh/s, GPU1 26.434 Mh/s, GPU2 24.687 Mh/s, GPU3 27.969 Mh/s
SC - Total Speed: 817.533 Mh/s, Total Shares: 3959, Rejected: 21
SC: GPU0 184.814 Mh/s, GPU1 211.471 Mh/s, GPU2 197.494 Mh/s, GPU3 223.754 Mh/s

https://i.imgur.com/mPc0xoG.png

https://i.imgur.com/vNPVGOJ.png

[almirfiorio]

Dear tytanick

How do I make the singlereseter's connection with each rig?
If a PC Hangs it automatically restarts it?

Can I customize something like time to reboot? What can be customized?

Thanks
Almir

Website: http://simplemining.net

What is SimpleMining OS (SMOS) ?
It is nice looking and easy Operating system for mining on AMD GPUs

Most wanted info:
- idea is simple: download for free my OS and write it to any drive: Hard / SSD / even USB drive
- after that you just enter your email address in config.txt file and boot your rig
- login to simplemining.net dashboard using the same email and start managing your rig
- for now service is free but in near future it will be small cost per rig like 1 $ per rig per month
- if there will be new miner i will implement it fast with auto-updates system

[tutorialevideo]

Strange Issue with simple mining last version 16.6 drivers i put online 10 msi rigs with stock bios all card running with 4MH on of the with 8 MH/s did a reboot same think i put now the old simple mining working great.

Any news on this?

[tytanick]

Strange Issue with simple mining last version 16.6 drivers i put online 10 msi rigs with stock bios all card running with 4MH on of the with 8 MH/s did a reboot same think i put now the old simple mining working great.

Any news on this?

Hmm, can you see if selecting PCI GEN2 wll help?
Also can you use old version but ugpgrade amd drivers ?

What do you mean by old SM ? what kernel and amd version ?

[tutorialevideo]

i will try this today and update you with gen2

[gilmardal]

Congrats

Your software is fantastic, Im in love with it

[zerf2004]

I am seeing this message scroll over and over on the monitor while mining but it never shows up in the console on the dashboard. What is this error trying to tell me? I currently am running 6 470s on a tb250-btc.


http://imgur.com/a/phfb8

Any ideas of this error is something to work about or not? What is it trying to say? Anything I can try to do to fix it? How do I identify which card is having the issue?

[fanatic26]

I am attempting to run zcash mining on your OS but I cant make it work. No matter what other miner I attempt to configure and use it just fails back to the claymore eth8.1

This is a freshly flashed SSD running an H81 pro BTC with 5x R9 Furys, celery processor, and 4gb of RAM

[zerf2004]

I am attempting to run zcash mining on your OS but I cant make it work. No matter what other miner I attempt to configure and use it just fails back to the claymore eth8.1

This is a freshly flashed SSD running an H81 pro BTC with 5x R9 Furys, celery processor, and 4gb of RAM

When you select another miner you need to also make sure that the radio button is selected as well.

[fanatic26]

When you select another miner you need to also make sure that the radio button is selected as well.

You sir are a gentleman and a scholar. It seems i need to pay more attention, thanks for pointing that out for me!


Whats the SSH password for this setup? I am not getting enough info from the web console. I see it mining but not on my pool status page. I want to make sure it is running my settings and I am not mining for someone else.

[zerf2004]

When you select another miner you need to also make sure that the radio button is selected as well.

You sir are a gentleman and a scholar. It seems i need to pay more attention, thanks for pointing that out for me!


Whats the SSH password for this setup? I am not getting enough info from the web console. I see it mining but not on my pool status page. I want to make sure it is running my settings and I am not mining for someone else.

Glad to help.

miner/miner
root/miner1324

[citronick]

FYI:

Claymore ETH Dual Miner v9.1 just out:

- added assembler kernels for ETH+SIA and ETH+PASCAL modes (major speedup for SIA and PASCAL).
- added alternative assembler kernels for Tonga and Polaris cards for ETH-only mode. Use them if you get best speed at "-dcri 1" (i.e. you cannot find speed peak), use "-asm 2" option to enable this mode.
- a few minor bug fixes and improvements.

[naeme18720]

Hi guys

Please help to me for sitting my 2 rig

-wd 1 -r 1 -epool eu2.ethermine.org:4444 -ewal 0x98364f098e2cd698e93c84bc25c4e37425dee027.salam1 -esm 0 -epsw x -allpools 1 -mport -3333

But not working

My first rig 3 rx470
My Two rig 3 rx470


Why in https://ethermine.org/miners/98364f098e2cd698e93c84bc25c4e37425dee027
Just 1 rig worked??

Name my rig in samplemining is sal1 and sal2