Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
November 09, 2016, 03:03:45 PM |
|
Help!!! GPU returned incorrect data
Same thing here, with 280x cards i=2, now I'm trying i=1, r9 390 cards are fine. (v2.1) Saphire R9 390 GPU returned incorrect data!!!Try "-i 0". And don't overclock GPU too much. Every new version loads GPU more and more...
|
|
|
|
MaddyJ
Newbie
Offline
Activity: 12
Merit: 0
|
|
November 09, 2016, 03:04:42 PM |
|
v3 is epic! 66Sol/s on RX 480
|
|
|
|
rascabily
|
|
November 09, 2016, 03:06:43 PM |
|
Help!!! GPU returned incorrect dataSame thing here, with 280x cards i=2, now I'm trying i=1, r9 390 cards are fine. (v2.1) Saphire R9 390 GPU returned incorrect data!!!Identical graphics and is caught pc
|
|
|
|
FlensGold
Legendary
Offline
Activity: 1405
Merit: 1001
|
|
November 09, 2016, 03:09:58 PM |
|
v3 is epic! 66Sol/s on RX 480 Which one exactly? Which BIOS? Getting ~58MH/s with my Sapphire RX480 Nitro+ 4GB, great job!
|
|
|
|
|
ghostfaceuk
|
|
November 09, 2016, 03:12:49 PM |
|
v3.0:
- improved speed by 20-30% (depends on card model). Up to 80H/s on stock 390X on "-i 2" mode.
PS. For those haters who think that I'm a thief and steal someone's code: don't use my miners, my efforts are not for you!
i'm getting between 54-57h/s on a 280 (non x)
|
|
|
|
mogs
|
|
November 09, 2016, 03:13:25 PM |
|
How about that linux version? Any ETA? Thanks for the hard work!
|
|
|
|
CoRpO
|
|
November 09, 2016, 03:14:30 PM |
|
How about that linux version? Any ETA? Thanks for the hard work!
Never
|
|
|
|
pwpwpw
|
|
November 09, 2016, 03:14:51 PM |
|
V 3.0 i m getting
73 on r9 390 42 r9 380 36 r9 270 49 rx 470 4g
I'm getting 50-55 on r9 390, what drivers and i setting you use? R9 390 without i setting I'm getting 70-74, cpu is 100% on i 2. 280x with i=1 has no incorrect gpu data.
|
|
|
|
arielbit
Legendary
Offline
Activity: 3430
Merit: 1059
|
|
November 09, 2016, 03:15:01 PM |
|
v3 is epic! 66Sol/s on RX 480 Which one exactly? Which BIOS? Getting ~58MH/s with my Sapphire RX480 Nitro+ 4GB, great job! damn i've seen my 480 hit 67 h/s, stock bios with overclocks ...but mostly at more or less 60 h/s
|
|
|
|
pwpwpw
|
|
November 09, 2016, 03:15:54 PM |
|
v3.0:
- improved speed by 20-30% (depends on card model). Up to 80H/s on stock 390X on "-i 2" mode.
PS. For those haters who think that I'm a thief and steal someone's code: don't use my miners, my efforts are not for you!
i'm getting between 54-57h/s on a 280 (non x) Is that with i=2 ? i=1 gives me 50 for 280x. If i=2 don't you get incorrect gpu data errors?
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4480
Merit: 4050
what is this "brake pedal" you speak of?
|
|
November 09, 2016, 03:17:43 PM |
|
v3.0: - improved speed by 20-30% (depends on card model). Up to 80H/s on stock 390X on "-i 2" mode.
pulling high 70s with my 390s with -i 2, mid 30s on my 380 with -i 1 (the 380 wont take -i 2) sweet.
|
|
|
|
gary_aut
Newbie
Offline
Activity: 45
Merit: 0
|
|
November 09, 2016, 03:22:10 PM |
|
System Crash with v3.0 (all 3 mining intensity combinations) on my Main System (2 x RX480 w. Crossfire on I7-6950X)
v2.0 works flawless
Will test it on my rigs in a few minutes ..
cg
Gary
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
|
November 09, 2016, 03:22:24 PM |
|
Around 75 on the 390s (2 are running 80-82), 37-38 on the 380s, 55-60 on the 470s480s, and 62 on the 280x not bad at all. about 25% increase from previous version for me.
A bit off topic, but I have the sapphire nitro 470 I got (return from RMA)...and in atiflash it always fails....cant read rom. Unless claymore is running then it reads it and "pass". any ideas ? I want to flash it but so far the only way would be to flash it while its working....which doesnt sound too good.
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
|
November 09, 2016, 03:23:01 PM |
|
gary I had some crashes too, then put GPU_FORCE_64BIT_PTR 0 and it seems good for now
|
|
|
|
mikewetminer88
Newbie
Offline
Activity: 30
Merit: 0
|
|
November 09, 2016, 03:24:33 PM |
|
If your rig got celeron, Pentium G32XX. Do use -i 0. Even -i 1 will reduced your hashrate. My RX480 on G3260 with -i 0 around 62-65sols. If i set to -i 1, it reduced to 51-55sols
My rig with i7 3770 RX480 8GB with -i 2 can hit 65-69sols max. CPU usage is around 33%.
|
|
|
|
ghostfaceuk
|
|
November 09, 2016, 03:26:20 PM |
|
v3.0:
- improved speed by 20-30% (depends on card model). Up to 80H/s on stock 390X on "-i 2" mode.
PS. For those haters who think that I'm a thief and steal someone's code: don't use my miners, my efforts are not for you!
i'm getting between 54-57h/s on a 280 (non x) Is that with i=2 ? i=1 gives me 50 for 280x. If i=2 don't you get incorrect gpu data errors? no data errors and no I setting. using a gpu clock of 1200 and mem clock of 1500. I havent messed around with the I setting to be honest set GPU_FORCE_64BIT_PTR=0 set GPU_MAX_HEAP_SIZE=100 set GPU_USE_SYNC_OBJECTS=1 set GPU_MAX_ALLOC_PERCENT=100 set GPU_SINGLE_ALLOC_PERCENT=100 ZecMiner64.exe -tt 76 -zpool eu1-zcash.flypool.org:3333 -zwal X -zpsw x This is my bat file incase it helps
|
|
|
|
gary_aut
Newbie
Offline
Activity: 45
Merit: 0
|
|
November 09, 2016, 03:27:02 PM |
|
gary I had some crashes too, then put GPU_FORCE_64BIT_PTR 0 and it seems good for now
already done - no changes cg Gary
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
November 09, 2016, 03:29:42 PM |
|
Seems many of us have this CPU. G3258, apparently its the only unlocked Celeron CPU and from what I read you can overclock it to like 4.5Ghz on stock cooler, anyone have any experience. Because I can't run any of my rigs using "-2" with any Celeron type CPUs. The i3/i5 works perfectly fine.
|
|
|
|
D8V1D
|
|
November 09, 2016, 03:31:52 PM |
|
MSI RX 480 4GB
50 H/s on v2.1 60 H/s on v3.0
Thanks Claymore!!!
|
|
|
|
|