Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[UnclWish]

Claymore could you set -i 3 default for 280x?

Just change it to -i 3 yourself. Claymore isn't responsible for sorting out your problems...

lol....already doing it smart guy...just giving an ideia or option to set intensity by the type of card, since mixed rig suffer after the reboot, because of the change of the order....but your ideia is very good to decrease the claymore profits...

Why -i3? My 280X with modded bios works fine on -i 5...

[Corerj]

Claymore could you set -i 3 default for 280x?

Just change it to -i 3 yourself. Claymore isn't responsible for sorting out your problems...

lol....already doing it smart guy...just giving an ideia or option to set intensity by the type of card, since mixed rig suffer after the reboot, because of the change of the order....but your ideia is very good to decrease the claymore profits...

Why -i3? My 280X with modded bios works fine on -i 5...

i saw at least two people with the same problem of stability with 280x...but my idea is an option of setting intensity by the type of the vga, not the order,since that changes after every reboot...

[AzzAz]

@ Claymore: Can you please change that hard visible purple line to orange or yellow or whatever?
Many of us use old bad lcd's that purple is unreadable. This for your dual miner I need, but posted here, sry

In v12.2 use "-colors 4" to use four colors only (gpu temp stats is 5th). I will add same to dual miner in next update.

That will do it, thanks!

[cohnhead]

Does anyone have a link to good reliable risers it seem 9 out 10 are crap

I may have some extras I would sell

[bitcoinsay]

How much speed increase has happened?Thanks for the update.

[silentrunner]

I have two computers each with two cards (R270 now getting 172 H/s).  One runs windows 10 the other ubuntu 14. These have been running fine on 11.1

After upgrading to 12.1 I saw about an 11% bump in h/s.

Windows runs fine but the linux box is restarting claymore every 3 to 20 minutes. It is using crimson 15.12 driver (fglrx-15.302).  There appears to be some issue with OpenCL.  I tried "-i 1" and "asm 0" but no change.  Is there anything else I can try?

12:31:10:922   7a7a2780   GPU 6 temp = 63, old fan speed = 80%, new fan speed = 80%
12:31:10:930   7a7a2780   GPU0 t=69C fan=60%, GPU1 t=63C fan=80%
12:31:10:930   7a7a2780   em hbt: 1, fm hbt: 24,
12:31:10:930   7a7a2780   watchdog - thread 0, hb time 270
12:31:10:930   7a7a2780   watchdog - thread 1, hb time 402
12:31:10:930   7a7a2780   watchdog - thread 2, hb time 133
12:31:10:930   7a7a2780   watchdog - thread 3, hb time 5
12:31:10:930   7a7a2780   watchdog - thread 4, hb time 63268
12:31:10:930   7a7a2780   WATCHDOG: GPU 1 hangs in OpenCL call, exit
12:31:10:931   7a7a2780   watchdog - thread 5, hb time 62960
12:31:10:931   7a7a2780   WATCHDOG: GPU 1 hangs in OpenCL call, exit
12:31:10:931   7a7a2780   watchdog - thread 6, hb time 63134
12:31:10:931   7a7a2780   WATCHDOG: GPU 1 hangs in OpenCL call, exit
12:31:10:931   7a7a2780   watchdog - thread 7, hb time 63397
12:31:10:931   7a7a2780   WATCHDOG: GPU 1 hangs in OpenCL call, exit
12:31:10:931   7a7a2780   OC v5, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst
12:31:10:932   7a7a2780   OC v5, Reset control for GPU 6, close miner right now if you want to use default control from Catalyst

After upgrading to 12.2 it has run for 3 hours without restarting.

BUT, gpu1 is set to to reduce intensity at 84 (-tt 76  -ttli 80,84) and I have found in the log where it has hit 90. The intensity is reduced (hash goes from 172 to 123 or lower) and the temperature slowly comes down.  I will try reducing the -ttli since there seems to be an over temp condition allowed.

20:05:00:931   43246780   GPU 0 temp = 75, old fan speed = 100%, new fan speed = 100%
20:05:00:934   43246780   GPU 6 temp = 88, old fan speed = 100%, new fan speed = 100%
20:05:00:935   43246780   Gpu 1 -ttli apply delta 4
20:05:03:937   43246780   GPU 0 temp = 75, old fan speed = 100%, new fan speed = 100%
20:05:03:940   43246780   GPU 6 temp = 85, old fan speed = 100%, new fan speed = 100%
20:05:03:940   43246780   Gpu 1 -ttli apply delta 1
20:05:06:942   43246780   GPU 0 temp = 75, old fan speed = 100%, new fan speed = 100%
20:05:06:945   43246780   GPU 6 temp = 89, old fan speed = 100%, new fan speed = 100%
20:05:06:945   43246780   Gpu 1 -ttli apply delta 5
20:05:09:947   43246780   GPU 0 temp = 75, old fan speed = 100%, new fan speed = 100%
20:05:09:950   43246780   GPU 6 temp = 85, old fan speed = 100%, new fan speed = 100%
20:05:09:951   43246780   Gpu 1 -ttli apply delta 1
20:05:12:953   43246780   GPU 0 temp = 75, old fan speed = 100%, new fan speed = 100%
20:05:12:956   43246780   GPU 6 temp = 90, old fan speed = 100%, new fan speed = 100%
20:05:12:956   43246780   Gpu 1 -ttli apply delta 6
20:05:15:958   43246780   GPU 0 temp = 75, old fan speed = 100%, new fan speed = 100%
20:05:15:961   43246780   GPU 6 temp = 86, old fan speed = 100%, new fan speed = 100%
20:05:15:961   43246780   Gpu 1 -ttli apply delta 2
20:05:18:963   43246780   GPU 0 temp = 75, old fan speed = 100%, new fan speed = 100%
20:05:18:967   43246780   GPU 6 temp = 87, old fan speed = 100%, new fan speed = 100%
20:05:18:967   43246780   Gpu 1 -ttli apply delta 3
20:05:21:969   43246780   GPU 0 temp = 75, old fan speed = 100%, new fan speed = 100%
20:05:21:973   43246780   GPU 6 temp = 87, old fan speed = 100%, new fan speed = 100%
20:05:21:973   43246780   Gpu 1 -ttli apply delta 3

[BenCodie]

How much speed increase has happened?Thanks for the update.

There is no speed difference between 12.1 and 12.2

Latest version v12.2:

- fixed issue with "-ttli" option.
- improved "-mport" option, now you can specify network adapter IP for incoming connections for remote management.
- added "-old 1" option, try to use it if v12.0 works stable for you, but v12.1 is unstable.

NOTES:

1. Reduce intensity ("-i" option) if miner is unstable.
2. It seems there is no way to get full speed on latest drivers for Fiji cards, at least in Windows. So don't use latest drivers for Fury, use 15.12 or 16.3.2.

[gemmacoin]

Windows defender detects malware in v12.2 (not in v12.1) after downloading it from Google drive.

[BenCodie]

Windows defender detects malware in v12.2 (not in v12.1) after downloading it from Google drive.

  
 lol
 
CM sending viruses to our computers and those viruses doing Mining for us 

[Ejanend]

How much speed increase has happened?Thanks for the update.

0% speed difference.

[gemmacoin]

Just downloaded v12.2 again and no warning this time!

[Nippy-ua]

чeм дaльшe в лec тeм бoльшe дpoв

[paladium]

How much speed did it increase?

[IOTUSA]

How much speed did it increase?

If it's this hard to read a single page of the thread you should probably just give up on mining.

[ozik67]

What`s hashrate for RX470 4 Gb with 12.2? I have 160.

[Etherion]

What`s hashrate for RX470 4 Gb with 12.2? I have 160.

I also want to know.

[RentGPU]

How much i differs in sols/s for rx series as a result of memory type ( elpida, hynix,samsung) as i have some rx470 msi and gigabyte they differ about 10 hashes up and down (same drivers and same OS)

[Qumiu]

What`s hashrate for RX470 4 Gb with 12.2? I have 160.

I also want to know.

On Sapphire RX 470 4GB:
Claymore v12.1 get between 262-286 H/s, unstable
Claymore v12.2 get between 285-290 H/s, more stable

[IOTUSA]

What`s hashrate for RX470 4 Gb with 12.2? I have 160.

I also want to know.

On Sapphire RX 470 4GB:
Claymore v12.1 get between 262-286 H/s, unstable
Claymore v12.2 get between 285-290 H/s, more stable

Has anyone seen any stability improvements from 12.1 -> 12.2 on RX 480? I keep having issues on 12/12.1 with zerh-hash cards and general crashes.

[hawer183]

How much speed did it increase?

If it's this hard to read a single page of the thread you should probably just give up on mining.

No more speed increase at all.