minerstat: mining OS + ASIC monitoring + Windows mining

[twan69666]

I'm trying out 3.2 and using the profit switch option. However, right this second musicoin is the most profitable. I have music set to "no" and do not have a server listed, but the algo keeps trying to mine it. Therefore CM fires up and it gives an error of not being able to parse the config.

Can you fix the yes/no options under pool and address editor? 

[1714794241]

1714794241

[1714794241]

1714794241

[1714794241]

1714794241

[coinscrow]

I'm trying out 3.2 and using the profit switch option. However, right this second musicoin is the most profitable. I have music set to "no" and do not have a server listed, but the algo keeps trying to mine it. Therefore CM fires up and it gives an error of not being able to parse the config.

Can you fix the yes/no options under pool and address editor? 

Yes i will add these button works within 1 day. (During the day later..)

because you did not set the Address Editor for that forker?!
every worker has different "Address Profile"

[twan69666]

I'm trying out 3.2 and using the profit switch option. However, right this second musicoin is the most profitable. I have music set to "no" and do not have a server listed, but the algo keeps trying to mine it. Therefore CM fires up and it gives an error of not being able to parse the config.

Can you fix the yes/no options under pool and address editor? 

Yes i will add these button works within 1 day. (During the day later..)

because you did not set the Address Editor for that forker?!
every worker has different "Address Profile"

Correct. No address and no pool. Both fields are 100% blank. I can give you my access key if need be

[FFI2013]

Under profit switching instead of wallet address do we use a username for pools with login and do I add username.worker or does the profit switch add the worker automatically and I just have to put username I never played with this option but trying it out

[coinscrow]

Under profit switching instead of wallet address do we use a username for pools with login and do I add username.worker or does the profit switch add the worker automatically and I just have to put username I never played with this option but trying it out

username.(WORKER) -> works yes

Correct. No address and no pool. Both fields are 100% blank. I can give you my access key if need be

to here, please: report [ @ ] minerstat.com


If anyone found any bug report here, new v3.2 test version in few days with benchmark tool, new settings app and with all bug fixes what you found, before i release. Testing period approx 2 weeks, to get the stable marker.

[FFI2013]

Under profit switching instead of wallet address do we use a username for pools with login and do I add username.worker or does the profit switch add the worker automatically and I just have to put username I never played with this option but trying it out

username.(WORKER) -> works yes

Correct. No address and no pool. Both fields are 100% blank. I can give you my access key if need be

to here, please: report [ @ ] minerstat.com


If anyone found any bug report here, new v3.2 test version in few days with benchmark tool, new settings app and with all bug fixes what you found, before i release. Testing period approx 2 weeks, to get the stable marker.

Ok just double checking under pools and address settings for profit switching lets say Im mining on suprnova I would usually put username.rig1 when I use profit switching do I put username.(WORKER) and whatever my worker name is in minerstat will auto fill in on the pool because some pools I have a different worker name than the minerstat worker name and will have to check my pools just asking cause I dont want to mine for a day under the wrong worker name and not get credit

[coinscrow]

Correct. No address and no pool. Both fields are 100% blank.

I'm finished it.

If you disable a COIN on the Address editor page, you will not mine that coin.

Ok just double checking under pools and address settings for profit switching lets say Im mining on suprnova I would usually put username.rig1 when I use profit switching do I put username.(WORKER) and whatever my worker name is in minerstat will auto fill in on the pool because some pools I have a different worker name than the minerstat worker name and will have to check my pools just asking cause I dont want to mine for a day under the wrong worker name and not get credit

you can fill with anything. FFI2013.rig1 FFI2013.(WORKER) fill in with your pool name and worker, thats all.

[FFI2013]

With the newest beta Im having trouble running two nodes on one pc either the node with claymore crashes or ewbf crashes also the commands %~dp0miner --api --log thats prefilled out in config gets written twice in the bat file this is running on win 7 when i first tried to unzip I get something about wattool secure file cant be copied hit continue to continue

Everything on my win 10 boxes are ok except it gets flagged now and wont let you download it you have to download to a folder that not protected before all your other downloads unzipped with no trouble just wanted to let you know just in case something was up

Also in the old version I was running ewbf with --fee 0 didn't if this version was the same or that command is contributing to it restarting.

Nothing major I was able to work around everything for now shitty I cant use the new profit switching on my win 7 miner using two nodes but I no its beta and bugs are going to happen just wanted to let you know about them thanks

[coinscrow]

With the newest beta Im having trouble running two nodes on one pc either the node with claymore crashes or ewbf crashes also the commands %~dp0miner --api --log thats prefilled out in config gets written twice in the bat file this is running on win 7 when i first tried to unzip I get something about wattool secure file cant be copied hit continue to continue

Everything on my win 10 boxes are ok except it gets flagged now and wont let you download it you have to download to a folder that not protected before all your other downloads unzipped with no trouble just wanted to let you know just in case something was up

Also in the old version I was running ewbf with --fee 0 didn't if this version was the same or that command is contributing to it restarting.

Nothing major I was able to work around everything for now shitty I cant use the new profit switching on my win 7 miner using two nodes but I no its beta and bugs are going to happen just wanted to let you know about them thanks

v3.2 in beta, but this config issue easiy can handle by you update your config. from the v3.2 not needed to write ccminer and miner just the commands. if you save your actual configs without modifications the system will upgrade your worker to the new comfiguration.

new release in few days with fixes

[FFI2013]

With the newest beta Im having trouble running two nodes on one pc either the node with claymore crashes or ewbf crashes also the commands %~dp0miner --api --log thats prefilled out in config gets written twice in the bat file this is running on win 7 when i first tried to unzip I get something about wattool secure file cant be copied hit continue to continue

Everything on my win 10 boxes are ok except it gets flagged now and wont let you download it you have to download to a folder that not protected before all your other downloads unzipped with no trouble just wanted to let you know just in case something was up

Also in the old version I was running ewbf with --fee 0 didn't if this version was the same or that command is contributing to it restarting.

Nothing major I was able to work around everything for now shitty I cant use the new profit switching on my win 7 miner using two nodes but I no its beta and bugs are going to happen just wanted to let you know about them thanks

v3.2 in beta, but this config issue easiy can handle by you update your config. from the v3.2 not needed to write ccminer and miner just the commands. if you save your actual configs without modifications the system will upgrade your worker to the new comfiguration.

new release in few days with fixes

I didn't change anything in my config usually I just unzip change user and worker in the node conf and start. Those commands where prefilled in with all your info I just changed my pool and worker well for what ever reason after the newest update if you dont take the %~dp0miner --api --log out in the web conf it add them twice in the bat file its not a issue to me but I was just saying to new ppl could be confusing

[coinscrow]

We improving our login system in the days, 1 user reported his ETH address is changed and he doesn't used 2FA only Token login.

- From now only 5 request on the login page in 5 min, or ban the IP for a few minutes..
- API requests has been reduced 3/min.
- All token keys has randomly length from now. 8-10 chars.

Shorten TOKENS should activate 2FA on their account !!

[zorvalth]

@coinscrow - I lost track of the updates and features but the most i need is to quickly change mining coins on the miners. So if i mine lets say neoscrypt coin and want to change to nist5 coin is there a fast way to do it or i have to go  and edit the ccminer config on every single miner?

[coinscrow]

@coinscrow - I lost track of the updates and features but the most i need is to quickly change mining coins on the miners. So if i mine lets say neoscrypt coin and want to change to nist5 coin is there a fast way to do it or i have to go  and edit the ccminer config on every single miner?

Apply to all, if you have similar gpu miners.

GPU Worker Groups to apply configs to selected rigs comes in few days.

[zorvalth]

@coinscrow - I lost track of the updates and features but the most i need is to quickly change mining coins on the miners. So if i mine lets say neoscrypt coin and want to change to nist5 coin is there a fast way to do it or i have to go  and edit the ccminer config on every single miner?

Apply to all, if you have similar gpu miners.

GPU Worker Groups to apply configs to selected rigs comes in few days.

Exactly, i got 3 types of nvidia and many amd's, so its not an option. But if there profiles/groups will be way easier? Also is there any way to start a bat/cmd file before the miner so i can change the clock depending on the coin?

[coinscrow]

@coinscrow - I lost track of the updates and features but the most i need is to quickly change mining coins on the miners. So if i mine lets say neoscrypt coin and want to change to nist5 coin is there a fast way to do it or i have to go  and edit the ccminer config on every single miner?

Apply to all, if you have similar gpu miners.

GPU Worker Groups to apply configs to selected rigs comes in few days.

Exactly, i got 3 types of nvidia and many amd's, so its not an option. But if there profiles/groups will be way easier? Also is there any way to start a bat/cmd file before the miner so i can change the clock depending on the coin?

yes, config groups will solve your problem.
its possible, how do you thought?

copy some example if you can

[zorvalth]

@coinscrow - I lost track of the updates and features but the most i need is to quickly change mining coins on the miners. So if i mine lets say neoscrypt coin and want to change to nist5 coin is there a fast way to do it or i have to go  and edit the ccminer config on every single miner?

Apply to all, if you have similar gpu miners.

GPU Worker Groups to apply configs to selected rigs comes in few days.

Exactly, i got 3 types of nvidia and many amd's, so its not an option. But if there profiles/groups will be way easier? Also is there any way to start a bat/cmd file before the miner so i can change the clock depending on the coin?

yes, config groups will solve your problem.
its possible, how do you thought?

copy some example if you can

You can call profiles from overdriventool through bat file for example.

[candymonkey]

Just worker - so what should I do? Use config editor?

I also found a bug (or just didn't read all things.
I added my ZEC address in pool setings.

After that I run two rigs, but lost updates of hashes on flypool. So I checked config editor. An there is address showed as example. Also this address is seen on "Algo/Pool/Wallet/Coin editor".
I changed that onto my address.

I hecked bat files, so it should work. But all addresses should be empty, because I even didn't know that I was digging not for me.

I think there should be option in rigs panel in dashboard that shows, what really is in bat files.

[coinscrow]

Just worker - so what should I do? Use config editor?

I also found a bug (or just didn't read all things.
I added my ZEC address in pool setings.

After that I run two rigs, but lost updates of hashes on flypool. So I checked config editor. An there is address showed as example. Also this address is seen on "Algo/Pool/Wallet/Coin editor".
I changed that onto my address.

I hecked bat files, so it should work. But all addresses should be empty, because I even didn't know that I was digging not for me.

I think there should be option in rigs panel in dashboard that shows, what really is in bat files.

Use config editor, if you not use profit switch funtion (only from v3.2)
edit local start.bat or config files useless, all configs download from the site.

good idea i will display the loaded parameter start.bat or config file in the node to easily can setup rigs and that will give some patience to everything is works fine

[r1rider01]

Testing out 3.2

i've setup DCR, LBC, etc...

whattomine shows ETH and LBC

minerstat 3.2 window shows ETH and LBC is best
yet it opens with ETH and DCR   thoughts?

**edit**
And despite me changing the pool address in the address page (for profile switch setup), it continues to use the default eu pool when i changed it to a us pool.

**edit**

so just found out.

even thou I have it set to profile switch (running the beta 3.2) it still uses the "config editor" page to manage the miners, not the "address editor" or the algorithm settings as previously mentioned.
This is a bit concerning, since all the addresses in config editor point to something else and not the one i have set in my address editor area as instructed.

Main reason i want to use minerstat, is so i don't have to manage these command lines and input the correct attributes to make it run right.

[coinscrow]

Testing out 3.2

i've setup DCR, LBC, etc...

whattomine shows ETH and LBC

minerstat 3.2 window shows ETH and LBC is best
yet it opens with ETH and DCR   thoughts?

**edit**
And despite me changing the pool address in the address page (for profile switch setup), it continues to use the default eu pool when i changed it to a us pool.

**edit**

so just found out.

even thou I have it set to profile switch (running the beta 3.2) it still uses the "config editor" page to manage the miners, not the "address editor" or the algorithm settings as previously mentioned.
This is a bit concerning, since all the addresses in config editor point to something else and not the one i have set in my address editor area as instructed.

Main reason i want to use minerstat, is so i don't have to manage these command lines and input the correct attributes to make it run right.

Read F.A.Q:
https://minerstat.com/helper/17.html

You need to click "Configure this RIG for Profit Switch on Config Editor"

Your configs need to look in the same way, after: