excavator by NiceHash - multi-algorithm NVIDIA GPU miner [1.5.6a]

[thhjs]

@djeZo:

Any chance of getting the commands for dual mining with 1.3.0a when using it stand-alone? I can't find any updated documentation and the command line help doesn't display the new dual algos, and I don't know how to set two coin addresses etc in the config file.
Thanks.

--ypsi

Hello I have used this config file to mine dual coins :

[
   {"time":0,"commands":[
      {"id":1,"method":"algorithm.add","params":["daggerhashimoto","daggerhashimoto.eu.nicehash.com:3353","adres.minername"]},
      {"id":1,"method":"algorithm.add","params":["decred","decred.eu.nicehash.com:3354","adres.minername"]}
   ]},
   {"time":3,"commands":[
      {"id":1,"method":"worker.add","params":["0","0"]},
      {"id":1,"method":"worker.add","params":["0","1"]},
      {"id":1,"method":"worker.add","params":["1","0"]},
      {"id":1,"method":"worker.add","params":["1","1"]},
      {"id":1,"method":"device.set.power_limit","params":["0","95"]},
      {"id":1,"method":"device.set.core_delta","params":["0","0"]},
      {"id":1,"method":"device.set.memory_delta","params":["0","400"]},
      {"id":1,"method":"device.set.power_limit","params":["1","75"]},
      {"id":1,"method":"device.set.core_delta","params":["1","0"]},
      {"id":1,"method":"device.set.memory_delta","params":["1","400"]}
      
   ]},
   {"time":10,"loop":10,"commands":[
      {"id":1,"method":"worker.print.speed","params":["0"]},
      {"id":1,"method":"algorithm.print.speeds","params":["0"]}
   ]},
   {"event":"on_quit","commands":[
      {"id":1,"method":"device.set.tdp","params":["0","100"]},
      {"id":1,"method":"device.set.core_delta","params":["0","0"]},
      {"id":1,"method":"device.set.memory_delta","params":["0","0"]},
      {"id":1,"method":"device.set.tdp","params":["1","100"]},
      {"id":1,"method":"device.set.core_delta","params":["1","0"]},
      {"id":1,"method":"device.set.memory_delta","params":["1","0"]}
]}
   
]

 

[thhjs]

For me daggerhasimoto only is the most profitable.

[Mind163]

Hi.
Excavator 1.3.0.a only for the Nicehash? Previously it was possible to work on supernova.

[hagbase]

Is there still AMD support in excavator 1.3.0 ?  Just tried to install nicehash miner v2 and there is no AMD support anymore?!

[Ursul0]

Lol seriously you make me laugh hard...
Anyone with a little knowledge about computer know if you have more cpus you need also some more CPU power and RAM.
All my rigs are made of min. 4 Core + HT i7 or even Hexa or Octa Core Xeons.

I never need to cry or be ashamed telling my rig can't handle 6 or 7 GPUs because i saved at the wrong point..there is the issue i see in this forum when people building a rig thinking they kjnow how it works.
Now I need to dry my eyes ..can't laugh anymore.

then obviously 99,7% make it wrong ..me under the 0.3% made it right..no big problems with sgminer and 6 or 7 cards ..rofl
I wanted to make abs workout but the laughing make it already..harder than 2000 crunches ..

just couldn't pass over this pearl.
must say something... ummmm... he is soo big, so huge! possibly the best ever! Great, so great!

[Ursul0]

Hi.
Excavator 1.3.0.a only for the Nicehash? Previously it was possible to work on supernova.

If you read back a page or two you can see I asked the same question, no answer yet from the devs. It seems so at least I haven't gotten it to work with anything else than Nicehash.

--ypsi

+1 interested

If I remember correctly this wasn't the plan. But plans change huh?

[thhjs]

When will 1.3.0a be released on Github ?
I have copied it from Nicehash 2.0 beta.

Soon.

We are polishing stuff now.

There are some API changes, that is why old page is not compatible with new miner.

Hi djeZo when is the polished version ready ?

[agis6]

Should we still wait for a Linux version?
Is Zawawa still working on this project?

[UnclWish]

Zawawa, when optimizations for GCN1.0 cards will be implemented? I waiting a month or more allready...

[Lieldoryn]

Is there still AMD support in excavator 1.3.0 ?  Just tried to install nicehash miner v2 and there is no AMD support anymore?!

On their website there is version 1.8.3 to support AMD. But she is still raw and I have the impression that now the software on their website are Amateurs. The latest stable version for GPU of AMD was 1.7.14 Now she had removed from the site, but 1.8 an order of magnitude worse.

[hagbase]

I got no problems with legacy miner, runs stable with my RX570 cards. After latest update i got no problems with algo switch either.
I've already done tests with excavator 1.2.11a and my AMD GPUs but dual mining was not optimal while single mining gave me same mh/s as claymore.

I'm still looking foward to switch to excavator because it is developed for nicehash as far as i know, so why should a use claymore if the pool i'm using  pays devs to develop a miner for their pool.

I guess Zawawa is busy polishing things.

[DrZeck]

Linux version planned ? soon ?

Cheers,

[dj--alex]

Linux version planned ? soon ?

Cheers,

+1
i download excavator master and cannot compile Excavator.  Bad release for Linux.

How to compile on Linux?

cmake
make
make -j4
?

[blue-yu]

What is the difference between this excavator and 1.1.4a excavator in NHM Legacy?

BR...

[zawawa]

Should we still wait for a Linux version?
Is Zawawa still working on this project?

I am, I am... I prepared Debian packages long time ago, but they have been put on hold for logistical reasons.
Unfortunately, I seem to have little control over the release date. So sorry about that...

[zawawa]

Hello,
Can we dual mine with lbry to suprnova?

Thanks.

At this point, you can do this only with NVIDIA cards.
By the way, I am currently working on cryptonight for CUDA.
I hope djeZo would let me get back to AMD stuff sooner than later...

[zawawa]

The good news: djeZo OK'ed the Linux version.
The bad news: AMD support will be discontinued.

I'm so sorry, guys... I guess I will have to resurrect Gateless Gate for AMD cards.

[Kayfolom]

Version 1.3.1 alpha NVIDIA report

GTX 1080Ti with config

Code:

[
	{"time":1,"commands":[
		{"id":1,"method":"algorithm.add","params":["equihash","zec-eu1.nanopool.org:6666","************************************"]}
	]},
	{"time":2,"commands":[
		{"id":1,"method":"worker.add","params":["0","0"]},
		{"id":1,"method":"worker.add","params":["0","0"]}
	]},
	{"time":5,"commands":[
		{"id":1,"method":"device.set.tdp","params":					["0","100"]},
		{"id":1,"method":"device.set.core_delta","params":	["0","130"]},
		{"id":1,"method":"device.set.memory_delta","params":["0","800"]}
	]},
{"time":10,"commands":[
		{"id":1,"method":"worker.reset","params":["0"]},
		{"id":1,"method":"worker.reset","params":["1"]}
	]},
	{"time":15,"loop":20,"commands":[
		{"id":1,"method":"worker.print.speed","params":["0"]},
		{"id":1,"method":"worker.print.speed","params":["1"]},
		{"id":1,"method":"algorithm.print.speeds","params":["0"]}
	]},
	{"event":"on_quit","commands":[
		{"id":1,"method":"device.set.tdp","params":					["0","100"]},
		{"id":1,"method":"device.set.core_delta","params":	["0","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["0","0"]}
	]}
]

Version 1.2.11 alpha  - 685 H/s
Version 1.3.1 alpha NVIDIA - 698 H/s :-)

5 X GTX 1070 with config

Code:

[
	{"time":1,"commands":[
		{"id":1,"method":"algorithm.add","params":["equihash","zec-eu1.nanopool.org:6666","***************************************"]}
	]},
	{"time":2,"commands":[
		{"id":1,"method":"worker.add","params":["0","0"]},
		{"id":1,"method":"worker.add","params":["0","0"]},
		{"id":1,"method":"worker.add","params":["0","1"]},
		{"id":1,"method":"worker.add","params":["0","1"]},
		{"id":1,"method":"worker.add","params":["0","2"]},
		{"id":1,"method":"worker.add","params":["0","2"]},
		{"id":1,"method":"worker.add","params":["0","3"]},
		{"id":1,"method":"worker.add","params":["0","3"]},
		{"id":1,"method":"worker.add","params":["0","4"]},
		{"id":1,"method":"worker.add","params":["0","4"]}
	]},
	{"time":5,"commands":[
		{"id":1,"method":"device.set.tdp","params":					["0","80"]},
		{"id":1,"method":"device.set.core_delta","params":	["0","80"]},
		{"id":1,"method":"device.set.memory_delta","params":["0","680"]},
		{"id":1,"method":"device.set.tdp","params":					["1","80"]},
		{"id":1,"method":"device.set.core_delta","params":	["1","100"]},
		{"id":1,"method":"device.set.memory_delta","params":["1","680"]},
		{"id":1,"method":"device.set.tdp","params":					["2","80"]},
		{"id":1,"method":"device.set.core_delta","params":	["2","100"]},
		{"id":1,"method":"device.set.memory_delta","params":["2","680"]},
		{"id":1,"method":"device.set.tdp","params":					["3","80"]},
		{"id":1,"method":"device.set.core_delta","params":	["3","100"]},
		{"id":1,"method":"device.set.memory_delta","params":["3","680"]},
		{"id":1,"method":"device.set.tdp","params":					["4","80"]},
		{"id":1,"method":"device.set.core_delta","params":	["4","100"]},
		{"id":1,"method":"device.set.memory_delta","params":["4","680"]}
	]},
{"time":10,"commands":[
		{"id":1,"method":"worker.reset","params":["0"]},
		{"id":1,"method":"worker.reset","params":["1"]},
		{"id":1,"method":"worker.reset","params":["2"]},
		{"id":1,"method":"worker.reset","params":["3"]},
		{"id":1,"method":"worker.reset","params":["4"]},
		{"id":1,"method":"worker.reset","params":["5"]},
		{"id":1,"method":"worker.reset","params":["6"]},
		{"id":1,"method":"worker.reset","params":["7"]},
		{"id":1,"method":"worker.reset","params":["8"]},
		{"id":1,"method":"worker.reset","params":["9"]}
	]},
	{"time":15,"loop":20,"commands":[
		{"id":1,"method":"worker.print.speed","params":["0"]},
		{"id":1,"method":"worker.print.speed","params":["1"]},
		{"id":1,"method":"worker.print.speed","params":["2"]},
		{"id":1,"method":"worker.print.speed","params":["3"]},
		{"id":1,"method":"worker.print.speed","params":["4"]},
		{"id":1,"method":"worker.print.speed","params":["5"]},
		{"id":1,"method":"worker.print.speed","params":["6"]},
		{"id":1,"method":"worker.print.speed","params":["7"]},
		{"id":1,"method":"worker.print.speed","params":["8"]},
		{"id":1,"method":"worker.print.speed","params":["9"]},
		{"id":1,"method":"algorithm.print.speeds","params":["0"]}
	]},
	{"event":"on_quit","commands":[
		{"id":1,"method":"device.set.tdp","params":					["0","100"]},
		{"id":1,"method":"device.set.core_delta","params":	["0","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["0","0"]},
		{"id":1,"method":"device.set.tdp","params":					["1","100"]},
		{"id":1,"method":"device.set.core_delta","params":	["1","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["1","0"]},
		{"id":1,"method":"device.set.tdp","params":					["2","100"]},
		{"id":1,"method":"device.set.core_delta","params":	["2","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["2","0"]},
		{"id":1,"method":"device.set.tdp","params":					["3","100"]},
		{"id":1,"method":"device.set.core_delta","params":	["3","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["3","0"]},
		{"id":1,"method":"device.set.tdp","params":					["4","100"]},
		{"id":1,"method":"device.set.core_delta","params":	["4","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["4","0"]}
	]}
]

Version 1.2.11 alpha  - 2120 H/s
Version 1.3.1 alpha NVIDIA - 1968 H/s  :-(

[Kayfolom]

GTX 1080 with config

Code:

[
	{"time":1,"commands":[
		{"id":1,"method":"algorithm.add","params":["equihash","zec-eu1.nanopool.org:6666","****************************************"]}
	]},
	{"time":2,"commands":[
		{"id":1,"method":"worker.add","params":["0","0"]},
		{"id":1,"method":"worker.add","params":["0","0"]}
	]},
	{"time":5,"commands":[
		{"id":1,"method":"device.set.tdp","params":					["0","90"]},
		{"id":1,"method":"device.set.core_delta","params":	["0","80"]},
		{"id":1,"method":"device.set.memory_delta","params":["0","830"]}
	]},
{"time":10,"commands":[
		{"id":1,"method":"worker.reset","params":["0"]},
		{"id":1,"method":"worker.reset","params":["1"]}
	]},
	{"time":15,"loop":20,"commands":[
		{"id":1,"method":"worker.print.speed","params":["0"]},
		{"id":1,"method":"worker.print.speed","params":["1"]},
		{"id":1,"method":"algorithm.print.speeds","params":["0"]}
	]},
	{"event":"on_quit","commands":[
		{"id":1,"method":"device.set.tdp","params":					["0","100"]},
		{"id":1,"method":"device.set.core_delta","params":	["0","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["0","0"]}
	]}
]

Version 1.2.11 alpha  - 510 H/s
Version 1.3.1 alpha NVIDIA - 538 H/s :-)

P.S. The API partially does not work. Apparently in the quiet made some changes.

[hagbase]

The good news: djeZo OK'ed the Linux version.
The bad news: AMD support will be discontinued.

I'm so sorry, guys... I guess I will have to resurrect Gateless Gate for AMD cards.

Np, but whats the point of maintaining two different applications (excavator&legacy)? I don't understand this as a nicehash customer.
Or  is this again  nv vs amd brand bullshiting?