cmbconcretefire
Newbie
 Offline
Activity: 54
Merit: 0
|
 |
October 23, 2017, 02:25:07 PM |
|
Forgive me please for asking this question. I have the excavator up and running (I couldn't believe it, but it is working) using the JSON formats etc that I saw in this thread.
I absolutely mean no disrespect what so ever. But with my 1060 card I'm getting about 247 H/s mining Hush or Zen. With EWBF, I get around 280 H/s.
So can someone explain to me what I am missing? I know people wouldn't work this hard on a miner that is slower without a very good reason. So please explain to me the reason I might want to use this instead of EWBF? Thanks very much.
I am getting 267 H/s with equihash and 1060 3GB. I would try a different driver. Alright, I will try a different driver. No problem there. I usually use the latest and greatest from Nvidia. Is there a particular version you tend to stick to? Also, when I install the driver, I DO NOT install the 3d drivers, virtual sound thingy, nor the Nvidia experience. I install the graphics driver, physics driver, and the HD audio driver. Don't know if that makes a shred of difference? Secondly, If I use this excavator miner outside of NH's "shell" (so to speak) to mine at any other pool, am I, or I am I NOT paying the dreaded 'dev fee?' Anyone can answer this btw, but thanks to the original responder. |
|
|
|
|
|
|
|
|
|
|
|
|
|
There are several different types of Bitcoin clients. The most secure are full nodes like Bitcoin Core, which will follow the rules of the network no matter what miners do. Even if every miner decided to create 1000 bitcoins per block, full nodes would stick to the rules and reject those blocks.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
DeadMoroz
Newbie
Offline
Activity: 2
Merit: 0
|
 |
October 24, 2017, 06:56:08 AM |
|
No overclocking support and fan control in linux version?
Also, where should I put index.html to get statistics page as in windows version?
|
|
|
|
|
|
|
|
|
jojo01
Newbie
Offline
Activity: 13
Merit: 0
|
|
October 25, 2017, 03:53:44 PM |
|
When i am mining with 6 GPU GTX1070 run smooth but when i mine using 8 GPU GTX1070 always crash, using same GPU Gigabyte 1070 ITX
I am using 2 worker for zec
Have anyone try 8GPU (16 worker) with excavator experience the same?
I have try multiple overclock configuration, still crash and sometime bluescreen
Please tell me, does excavator support 8GPU, because last time i use excavator 1.1.0a stable
I try my 8GPU rig, using 2 software, 4GPU using excavator, and 4GPU using EBWF, and it is stable,
Djezo can you please confirm excavator 1.3.2a support 8GPU?
Please zawawa djezo, or anyone, have try using 8GPU with no problem? What do i do wrong? Did you try to run it with one worker per GPU? How about the M option? Not try M option, i use 2 worker per GPU, 8GPU=16worker, try using 5GPU stable If it does support 8GPU, i think i will try again |
|
|
|
|
dropky
Jr. Member
Offline
Activity: 132
Merit: 7
|
|
October 25, 2017, 05:08:27 PM |
|
When i am mining with 6 GPU GTX1070 run smooth but when i mine using 8 GPU GTX1070 always crash, using same GPU Gigabyte 1070 ITX
I am using 2 worker for zec
Have anyone try 8GPU (16 worker) with excavator experience the same?
I have try multiple overclock configuration, still crash and sometime bluescreen
Please tell me, does excavator support 8GPU, because last time i use excavator 1.1.0a stable
I try my 8GPU rig, using 2 software, 4GPU using excavator, and 4GPU using EBWF, and it is stable,
Djezo can you please confirm excavator 1.3.2a support 8GPU?
Please zawawa djezo, or anyone, have try using 8GPU with no problem? What do i do wrong? Did you try to run it with one worker per GPU? How about the M option? Not try M option, i use 2 worker per GPU, 8GPU=16worker, try using 5GPU stable If it does support 8GPU, i think i will try again Please try to run the 1.3.4 version. You should run one worker per device and leave M as it is (default is 1 from now on). Excavator does support 8 GPUs. |
|
|
|
|
Voda84
Newbie
Offline
Activity: 1
Merit: 0
|
|
October 26, 2017, 12:38:02 AM |
|
Hello dear dropky. Please add total GPU power usage (Watt) in HTTP API if it possible.
|
|
|
|
|
dropky
Jr. Member
Offline
Activity: 132
Merit: 7
|
|
October 26, 2017, 05:42:34 AM |
|
Hello dear dropky. Please add total GPU power usage (Watt) in HTTP API if it possible.
I will add this to our to-do list. Thanks for the suggestion. |
|
|
|
|
Kayfolom
Member
Offline
Activity: 68
Merit: 10
|
|
October 26, 2017, 06:47:45 AM |
|
Excavator version: 1.3.3a_nvidia :
GTX 1070x5 Equihash with 2 worker and M0 - 2.226 kH/s
Excavator version: 1.3.4a_nvidia :
GTX 1070x5 Equihash with 2 worker and M0 - 2.168 kH/s
GTX 1070x5 Equihash with 2 worker and M1 - 2.194 kH/s
GTX 1070x5 Equihash with 2 worker and M2 - 2.095 kH/s GPU usage 93%
And after 10 minuts: [09:32:56][0x00000fa4][fatal] wrkr3-6 | CUDA error DRIVER: '719' in func 'kernel_launcher::copy_solutions_multi_stream' line 448
GTX 1070x5 Equihash with 1 worker and M0 - 1.977 kH/s
GTX 1070x5 Equihash with 1 worker and M1 - 2.208 kH/s
GTX 1070x5 Equihash with 1 worker and M2 - 2.075 kH/s
GTX 1070x5 Equihash with 3 worker and M2 - 2.075 kH/s
And after 3 minuts "CUDA error DRIVER" and crash Windows 10
I return to the version 1.3.3a_nvidia :-(
|
|
|
|
|
Kayfolom
Member
Offline
Activity: 68
Merit: 10
|
|
October 26, 2017, 06:56:52 AM |
|
Excavator version: 1.3.3a_nvidia :
GTX 1080 Lyra2REv2 with 2 worker - 52.357 MH/s
Excavator version: 1.3.4a_nvidia :
GTX 1080 Lyra2REv2 with 2 worker - 53.182 MH/s :-)
GTX 1080 Lyra2REv2 with 1 worker - 52.625 MH/s
Good job!
|
|
|
|
|
Kayfolom
Member
Offline
Activity: 68
Merit: 10
|
|
October 26, 2017, 07:03:51 AM |
|
Excavator version: 1.3.3a_nvidia :
GTX 1080 Ti Lyra2REv2 with 2 worker - 72.735 MH/s
Excavator version: 1.3.4a_nvidia :
GTX 1080 Ti Lyra2REv2 with 2 worker - 74.624 MH/s :-)
GTX 1080 Ti Lyra2REv2 with 1 worker - 72.927 MH/s (GPU load 98%)
Good job!
|
|
|
|
|
Kayfolom
Member
Offline
Activity: 68
Merit: 10
|
|
October 26, 2017, 07:21:49 AM |
|
Excavator version: 1.3.3a_nvidia :
GTX 1070x5 Lyra2REv2 with 2 worker - 197.453 kH/s
Excavator version: 1.3.4a_nvidia :
GTX 1070x5 Lyra2REv2 with 2 worker - 199.717 kH/s :-)
GTX 1070x5 Lyra2REv2 with 1 worker - 198.338 kH/s
|
|
|
|
|
dropky
Jr. Member
Offline
Activity: 132
Merit: 7
|
|
October 26, 2017, 08:34:46 AM |
|
Excavator version: 1.3.3a_nvidia :
GTX 1070x5 Equihash with 2 worker and M0 - 2.226 kH/s
Excavator version: 1.3.4a_nvidia :
GTX 1070x5 Equihash with 2 worker and M0 - 2.168 kH/s
GTX 1070x5 Equihash with 2 worker and M1 - 2.194 kH/s
GTX 1070x5 Equihash with 2 worker and M2 - 2.095 kH/s GPU usage 93%
And after 10 minuts: [09:32:56][0x00000fa4][fatal] wrkr3-6 | CUDA error DRIVER: '719' in func 'kernel_launcher::copy_solutions_multi_stream' line 448
GTX 1070x5 Equihash with 1 worker and M0 - 1.977 kH/s
GTX 1070x5 Equihash with 1 worker and M1 - 2.208 kH/s
GTX 1070x5 Equihash with 1 worker and M2 - 2.075 kH/s
GTX 1070x5 Equihash with 3 worker and M2 - 2.075 kH/s
And after 3 minuts "CUDA error DRIVER" and crash Windows 10
I return to the version 1.3.3a_nvidia :-(
You should use one worker per device when running with M2. M2 mode is already using 2 streams. M1 should perform better with one worker than two. Excavator version: 1.3.3a_nvidia : GTX 1070x5 Equihash with 2 worker and M0 - 2.226 kH/s Excavator version: 1.3.4a_nvidia : GTX 1070x5 Equihash with 2 worker and M0 - 2.168 kH/s This is weird. There were no changes regarding M0 mode. Speed is usually bouncing up and down a little, could that be the reason? Our tests showed running M1 with one worker should reach the highest rates. What version of drivers do you have? Also can you tell me your oc settings (mem, cor, power limit)? Thanks. |
|
|
|
|
Kayfolom
Member
Offline
Activity: 68
Merit: 10
|
|
October 26, 2017, 09:09:14 AM |
|
You should use one worker per device when running with M2. M2 mode is already using 2 streams.
M1 should perform better with one worker than two.
Excavator version: 1.3.3a_nvidia :
GTX 1070x5 Equihash with 2 worker and M0 - 2.226 kH/s
Excavator version: 1.3.4a_nvidia :
GTX 1070x5 Equihash with 2 worker and M0 - 2.168 kH/s
This is weird. There were no changes regarding M0 mode. Speed is usually bouncing up and down a little, could that be the reason?
Our tests showed running M1 with one worker should reach the highest rates.
What version of drivers do you have? Also can you tell me your oc settings (mem, cor, power limit)? Thanks.
Windows 10 x64 5x GIGABYTE GeForce GTX 1070 G1 GAMING [GV-N1070G1 GAMING-8GD] Drivers 382.05 {"time":5,"commands":[
{"id":1,"method":"device.set.tdp","params": ["0","80"]},
{"id":1,"method":"device.set.core_delta","params": ["0","80"]},
{"id":1,"method":"device.set.memory_delta","params":["0","680"]},
{"id":1,"method":"device.set.tdp","params": ["1","80"]},
{"id":1,"method":"device.set.core_delta","params": ["1","100"]},
{"id":1,"method":"device.set.memory_delta","params":["1","680"]},
{"id":1,"method":"device.set.tdp","params": ["2","80"]},
{"id":1,"method":"device.set.core_delta","params": ["2","100"]},
{"id":1,"method":"device.set.memory_delta","params":["2","680"]},
{"id":1,"method":"device.set.tdp","params": ["3","80"]},
{"id":1,"method":"device.set.core_delta","params": ["3","100"]},
{"id":1,"method":"device.set.memory_delta","params":["3","680"]},
{"id":1,"method":"device.set.tdp","params": ["4","80"]},
{"id":1,"method":"device.set.core_delta","params": ["4","100"]},
{"id":1,"method":"device.set.memory_delta","params":["4","680"]}
]},
|
|
|
|
|
Kayfolom
Member
Offline
Activity: 68
Merit: 10
|
|
October 26, 2017, 09:17:42 AM |
|
Excavator version: 1.3.4a_nvidia : GTX 1070x5 Equihash with 1 worker and M2 - 2.071 kH/s [
{"time":1,"commands":[
{"id":1,"method":"algorithm.add","params":["equihash","equihash.eu.nicehash.com:3357","**********************"]}
]},
{"time":2,"commands":[
{"id":1,"method":"worker.add","params":["0","0","2"]},
{"id":1,"method":"worker.add","params":["0","1","2"]},
{"id":1,"method":"worker.add","params":["0","2","2"]},
{"id":1,"method":"worker.add","params":["0","3","2"]},
{"id":1,"method":"worker.add","params":["0","4","2"]}
]},
{"time":5,"commands":[
{"id":1,"method":"device.set.tdp","params": ["0","80"]},
{"id":1,"method":"device.set.core_delta","params": ["0","80"]},
{"id":1,"method":"device.set.memory_delta","params":["0","680"]},
{"id":1,"method":"device.set.tdp","params": ["1","80"]},
{"id":1,"method":"device.set.core_delta","params": ["1","100"]},
{"id":1,"method":"device.set.memory_delta","params":["1","680"]},
{"id":1,"method":"device.set.tdp","params": ["2","80"]},
{"id":1,"method":"device.set.core_delta","params": ["2","100"]},
{"id":1,"method":"device.set.memory_delta","params":["2","680"]},
{"id":1,"method":"device.set.tdp","params": ["3","80"]},
{"id":1,"method":"device.set.core_delta","params": ["3","100"]},
{"id":1,"method":"device.set.memory_delta","params":["3","680"]},
{"id":1,"method":"device.set.tdp","params": ["4","80"]},
{"id":1,"method":"device.set.core_delta","params": ["4","100"]},
{"id":1,"method":"device.set.memory_delta","params":["4","680"]}
]},
{"time":10,"commands":[
{"id":1,"method":"worker.reset","params":["0"]},
{"id":1,"method":"worker.reset","params":["1"]},
{"id":1,"method":"worker.reset","params":["2"]},
{"id":1,"method":"worker.reset","params":["3"]},
{"id":1,"method":"worker.reset","params":["4"]},
{"id":1,"method":"worker.reset","params":["5"]},
{"id":1,"method":"worker.reset","params":["6"]},
{"id":1,"method":"worker.reset","params":["7"]},
{"id":1,"method":"worker.reset","params":["8"]},
{"id":1,"method":"worker.reset","params":["9"]}
]},
{"time":15,"loop":20,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"worker.print.speed","params":["1"]},
{"id":1,"method":"worker.print.speed","params":["2"]},
{"id":1,"method":"worker.print.speed","params":["3"]},
{"id":1,"method":"worker.print.speed","params":["4"]},
{"id":1,"method":"worker.print.speed","params":["5"]},
{"id":1,"method":"worker.print.speed","params":["6"]},
{"id":1,"method":"worker.print.speed","params":["7"]},
{"id":1,"method":"worker.print.speed","params":["8"]},
{"id":1,"method":"worker.print.speed","params":["9"]},
{"id":1,"method":"algorithm.print.speeds","params":["0"]}
]},
{"event":"on_quit","commands":[
{"id":1,"method":"device.set.tdp","params": ["0","100"]},
{"id":1,"method":"device.set.core_delta","params": ["0","0"]},
{"id":1,"method":"device.set.memory_delta","params":["0","0"]},
{"id":1,"method":"device.set.tdp","params": ["1","100"]},
{"id":1,"method":"device.set.core_delta","params": ["1","0"]},
{"id":1,"method":"device.set.memory_delta","params":["1","0"]},
{"id":1,"method":"device.set.tdp","params": ["2","100"]},
{"id":1,"method":"device.set.core_delta","params": ["2","0"]},
{"id":1,"method":"device.set.memory_delta","params":["2","0"]},
{"id":1,"method":"device.set.tdp","params": ["3","100"]},
{"id":1,"method":"device.set.core_delta","params": ["3","0"]},
{"id":1,"method":"device.set.memory_delta","params":["3","0"]},
{"id":1,"method":"device.set.tdp","params": ["4","100"]},
{"id":1,"method":"device.set.core_delta","params": ["4","0"]},
{"id":1,"method":"device.set.memory_delta","params":["4","0"]}
]}
]
 |
|
|
|
|
dropky
Jr. Member
Offline
Activity: 132
Merit: 7
|
|
October 27, 2017, 09:42:27 AM |
|
Excavator version: 1.3.4a_nvidia : GTX 1070x5 Equihash with 1 worker and M2 - 2.071 kH/s [
{"time":1,"commands":[
{"id":1,"method":"algorithm.add","params":["equihash","equihash.eu.nicehash.com:3357","**********************"]}
]},
{"time":2,"commands":[
{"id":1,"method":"worker.add","params":["0","0","2"]},
{"id":1,"method":"worker.add","params":["0","1","2"]},
{"id":1,"method":"worker.add","params":["0","2","2"]},
{"id":1,"method":"worker.add","params":["0","3","2"]},
{"id":1,"method":"worker.add","params":["0","4","2"]}
]},
{"time":5,"commands":[
{"id":1,"method":"device.set.tdp","params": ["0","80"]},
{"id":1,"method":"device.set.core_delta","params": ["0","80"]},
{"id":1,"method":"device.set.memory_delta","params":["0","680"]},
{"id":1,"method":"device.set.tdp","params": ["1","80"]},
{"id":1,"method":"device.set.core_delta","params": ["1","100"]},
{"id":1,"method":"device.set.memory_delta","params":["1","680"]},
{"id":1,"method":"device.set.tdp","params": ["2","80"]},
{"id":1,"method":"device.set.core_delta","params": ["2","100"]},
{"id":1,"method":"device.set.memory_delta","params":["2","680"]},
{"id":1,"method":"device.set.tdp","params": ["3","80"]},
{"id":1,"method":"device.set.core_delta","params": ["3","100"]},
{"id":1,"method":"device.set.memory_delta","params":["3","680"]},
{"id":1,"method":"device.set.tdp","params": ["4","80"]},
{"id":1,"method":"device.set.core_delta","params": ["4","100"]},
{"id":1,"method":"device.set.memory_delta","params":["4","680"]}
]},
{"time":10,"commands":[
{"id":1,"method":"worker.reset","params":["0"]},
{"id":1,"method":"worker.reset","params":["1"]},
{"id":1,"method":"worker.reset","params":["2"]},
{"id":1,"method":"worker.reset","params":["3"]},
{"id":1,"method":"worker.reset","params":["4"]},
{"id":1,"method":"worker.reset","params":["5"]},
{"id":1,"method":"worker.reset","params":["6"]},
{"id":1,"method":"worker.reset","params":["7"]},
{"id":1,"method":"worker.reset","params":["8"]},
{"id":1,"method":"worker.reset","params":["9"]}
]},
{"time":15,"loop":20,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"worker.print.speed","params":["1"]},
{"id":1,"method":"worker.print.speed","params":["2"]},
{"id":1,"method":"worker.print.speed","params":["3"]},
{"id":1,"method":"worker.print.speed","params":["4"]},
{"id":1,"method":"worker.print.speed","params":["5"]},
{"id":1,"method":"worker.print.speed","params":["6"]},
{"id":1,"method":"worker.print.speed","params":["7"]},
{"id":1,"method":"worker.print.speed","params":["8"]},
{"id":1,"method":"worker.print.speed","params":["9"]},
{"id":1,"method":"algorithm.print.speeds","params":["0"]}
]},
{"event":"on_quit","commands":[
{"id":1,"method":"device.set.tdp","params": ["0","100"]},
{"id":1,"method":"device.set.core_delta","params": ["0","0"]},
{"id":1,"method":"device.set.memory_delta","params":["0","0"]},
{"id":1,"method":"device.set.tdp","params": ["1","100"]},
{"id":1,"method":"device.set.core_delta","params": ["1","0"]},
{"id":1,"method":"device.set.memory_delta","params":["1","0"]},
{"id":1,"method":"device.set.tdp","params": ["2","100"]},
{"id":1,"method":"device.set.core_delta","params": ["2","0"]},
{"id":1,"method":"device.set.memory_delta","params":["2","0"]},
{"id":1,"method":"device.set.tdp","params": ["3","100"]},
{"id":1,"method":"device.set.core_delta","params": ["3","0"]},
{"id":1,"method":"device.set.memory_delta","params":["3","0"]},
{"id":1,"method":"device.set.tdp","params": ["4","100"]},
{"id":1,"method":"device.set.core_delta","params": ["4","0"]},
{"id":1,"method":"device.set.memory_delta","params":["4","0"]}
]}
]
Please try to run 1.3.4a version with one worker per device (don't change the default parameters). [
{"time":0,"commands":[
{"id":1,"method":"algorithm.add","params":["equihash","equihash.eu.nicehash.com:3357","*****"]}
]},
{"time":3,"commands":[
{"id":1,"method":"worker.add","params":["0","0"]},
{"id":1,"method":"worker.add","params":["0","1"]},
{"id":1,"method":"worker.add","params":["0","2"]},
{"id":1,"method":"worker.add","params":["0","3"]},
{"id":1,"method":"worker.add","params":["0","4"]}
]},
{"time":10,"loop":10,"commands":[
{"id":1,"method":"algorithm.print.speeds","params":["0"]}
]},
{"time":10,"commands":[
{"id":1,"method":"worker.reset","params":["0"]},
{"id":1,"method":"worker.reset","params":["1"]},
{"id":1,"method":"worker.reset","params":["2"]},
{"id":1,"method":"worker.reset","params":["3"]},
{"id":1,"method":"worker.reset","params":["4"]}
]}
]
|
|
|
|
|
Kayfolom
Member
Offline
Activity: 68
Merit: 10
|
|
October 27, 2017, 09:57:31 AM |
|
Please try to run 1.3.4a version with one worker per device (don't change the default parameters). [
{"time":0,"commands":[
{"id":1,"method":"algorithm.add","params":["equihash","equihash.eu.nicehash.com:3357","*****"]}
]},
{"time":3,"commands":[
{"id":1,"method":"worker.add","params":["0","0"]},
{"id":1,"method":"worker.add","params":["0","1"]},
{"id":1,"method":"worker.add","params":["0","2"]},
{"id":1,"method":"worker.add","params":["0","3"]},
{"id":1,"method":"worker.add","params":["0","4"]}
]},
{"time":10,"loop":10,"commands":[
{"id":1,"method":"algorithm.print.speeds","params":["0"]}
]},
{"time":10,"commands":[
{"id":1,"method":"worker.reset","params":["0"]},
{"id":1,"method":"worker.reset","params":["1"]},
{"id":1,"method":"worker.reset","params":["2"]},
{"id":1,"method":"worker.reset","params":["3"]},
{"id":1,"method":"worker.reset","params":["4"]}
]}
]
 |
|
|
|
|
matheussiq8
Newbie
Offline
Activity: 81
Merit: 0
|
|
October 29, 2017, 11:15:46 AM |
|
please add the Phi1612 algo so that we can mine LUX Coin. Right now it's one of the most profitable coins to mine on Nvidia.
|
|
|
|
|
ultrafiolet
Newbie
Offline
Activity: 3
Merit: 0
|
|
October 29, 2017, 05:04:06 PM |
|
hi2all How to connect the excavator to the VTC p2pool, for example here http://vtc.geekboxit.com:9171/static/ ? default_command_file.json:[
{"time":0,"commands":[
{"id":1,"method":"algorithm.add","params":["lyra2rev2","vtc.geekboxit.com:9171","VnVVbXctPDi4F7aUXWiS2D6mNuStZsU4bG"]}
]},
{"time":3,"commands":[
{"id":1,"method":"worker.add","params":["0","0"]},
{"id":1,"method":"worker.add","params":["0","1"]}
]},
{"time":10,"loop":10,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"algorithm.print.speeds","params":["0"]},
{"id":1,"method":"worker.print.speed","params":["1"]},
{"id":1,"method":"algorithm.print.speeds","params":["1"]}
]}
]
[19:01:39][0x00000654][info] Log started
[19:01:39][0x00000654][info] core | Found CUDA device: GeForce GTX 1080
[19:01:40][0x00000654][info] core | Found CUDA device: GeForce GTX 1080
[19:01:40][0x00000654][info] http | Listening on 127.0.0.1:38080
[19:01:40][0x00000654][info] core | Initialized!
[19:01:40][0x00001904][info] net | Connecting to 45.76.249.234:9171 (vtc.geekboxit.com)
[19:01:40][0x00001904][info] net | Connected!
[19:01:40][0x00002130][warning] net | Net error: JSON member "error" not expected type: Array
[19:01:40][0x00002130][warning] net | Net error: JSON member missing: "error"
[19:01:40][0x00002130][warning] net | Net error: JSON member missing: "error"
[19:01:40][0x00001904][warning] net | Net error: JSON member missing: "error"
[19:01:41][0x00001904][warning] net | Net error: JSON member missing: "error"
[19:01:43][0x00002b84][info] wrkr1-1 | Algorithm: CUDA-lyra2rev2 parameters: T=2810880
[19:01:43][0x00001f4c][info] wrkr0-0 | Algorithm: CUDA-lyra2rev2 parameters: T=2810880
[19:01:46][0x00002130][warning] net | Net error: JSON member missing: "error"
[19:01:46][0x00001904][warning] net | Net error: JSON member missing: "error"
[19:01:50][0x00002130][info] core | Device #0-0 speed: 0.000000 H/s
[19:01:50][0x00002130][info] core | Algorithm 'lyra2rev2' total speed: 0.000000 H/s
[19:01:50][0x00002130][info] core | Device #1-1 speed: 0.000000 H/s
[19:01:50][0x00002130][info] core | Algorithm 'lyra2rev2' total speed: 0.000000 H/s
Please help! |
|
|
|
|
|
|
|
