MassDestruction
Newbie
Offline
Activity: 10
Merit: 0
|
|
January 17, 2018, 06:41:44 PM |
|
Is there some sort of process that runs on nvoc 19 at around 7AM? I've noticed that my rig shits it self on the nose at around 6:50AM - 7AM eastern time everyday.
I'm using claymore mining ETH on ethermine.org.
There are no scheduled jobs or anything like that in nvOC that I am aware of. What mining pool are you on? It could be the pool maintenance window. I'm on the North America East coast pool. To be specific. North America (East): us1.ethermine.org:4444
|
|
|
|
|
kif2000
Newbie
Offline
Activity: 3
Merit: 0
|
|
January 17, 2018, 07:55:24 PM |
|
Hi, guys. Need help with NVOC (latest version): I made Gigabyte H110-D3A rig with 4 Nvidia GPUs (MSI 1060/3, Asus P106-100, Asus P106-100 and Asus GTX 970).
My problem is that sometime a GPU got disconnected and I guess rig restarts uncleanly and I get Journal error - Clean XXXXX/XXXXX .... and rig can't load into Ubuntu any more!
I had tried all I could (fsck -f, or -p, or -a) and none of it can't repair error! I have to "reflash" my NVOC image on hard drive almost on daily base and error repeate again!
In logs can't see any error except GPU disconnect, no GPU number or anything and I don't have a clue what to do next! Done BIOS updated to F23a, checked RAM, tried another HDD, no OCed GPUs, removed some GPUs... none worked.
Any ideas?
1. low down your overclocking 2. try to use SSD 3. replace SATA power cable (yes I had this problem) 4. check/replace risers 1. don't think the OC is the problem (+100 mhz on GPU and +0 on VRAM), but will try without any OC, again 2. don't have any ssd available right now, but did try with other hdd and got the same error 3. did replaced sata data cable, but will do replace power cable tommorow 4. will do it, again(!) But, why fsck can not repair journal error? Could it be because the Ubuntu is not installed from scratch but hdd was reimaged with NVOC? BTW my rigs was doing just fine for first 7-8 days! But after that, I get the error every 24 hours or less. Your system is on v0019-2.0? It may look weird but is IGD disabled in bios? Disable virtualization in bios. May help if you update ubuntu too if the above doesnt fix. I thought that NVOC PXA with turned updates to ON is latest version. My error. Yes. O/B vga is dissabled - otherwise couldn't get vents control in Nvidia drivers. VT - I can't remember. I put other hdd and installed w10 (for hardware testing purpose only) and if the rig works for few days fine, will switch back to Linux!
|
|
|
|
bumbu100
Newbie
Offline
Activity: 44
Merit: 0
|
|
January 17, 2018, 08:23:28 PM |
|
P104-100 Inno3D 4GB Results: With nvoc overclocking, 38.5 MH/s in ethash. 10X !!!!!!!
|
|
|
|
salfter
|
|
January 17, 2018, 08:24:43 PM Last edit: January 17, 2018, 11:02:23 PM by salfter |
|
I had been running v0.19 for the past few months, but an auto-update broke things such that the miners wouldn't work. I recently updated to v0.19-1.4 and found it was mostly working, but whenever it started trying to mine Feathercoin (I use my MiningPoolHub switcher), the miner still didn't kick in and the rig would sit idle until (1) another coin became more profitable or (2) I noticed by the lack of fan noise that the rig was idle. I tried firing up KTccminer manually a little bit ago, but found that it ended almost right away with an illegal-instruction error. I'm rebuilding it right now (make clean && make -j3); I'm guessing the rebuilt miner will work properly and I'll be able to reenable Feathercoin (currently the most profitable, as it happens). It was configured to use -march=native. My mining rig uses a Celeron G3920; odds are the miner was last built on a Core iSomethingorother with some additional instructions beyond what the Celeron supports. Pre-post update: it looks like make clean && make -j3 was insufficient, as it runs a couple seconds longer before it segfaults. INSTALL recommends running build.sh, so I'm doing that. Update: Now I'm getting this set of errors: ccminer 8.13-KlausT (64bit) for nVidia GPUs Compiled with GCC 5.4 using Nvidia CUDA Toolkit 8.0
Based on pooler cpuminer 2.3.2 and the tpruvot@github fork CUDA support by Christian Buchner, Christian H. and DJM34 Includes optimizations implemented by sp-hash, klaust, tpruvot and tsiv.
[2018-01-17 14:34:55] Starting Stratum on stratum+tcp://hub.miningpoolhub.com:20510 [2018-01-17 14:34:55] NVML GPU monitoring enabled. 0 1 [2018-01-17 14:34:55] GPU #2: waiting for data [2018-01-17 14:34:55] GPU #1: waiting for data [2018-01-17 14:34:55] 4 miner threads started, using 'neoscrypt' algorithm. [2018-01-17 14:34:55] GPU #0: waiting for data [2018-01-17 14:34:55] GPU #3: waiting for data [2018-01-17 14:34:55] Stratum difficulty set to 2048 [2018-01-17 14:34:55] Stratum difficulty set to 523.054 Cuda error in func 'neoscrypt_cpu_init_2stream' at line 1431 : invalid device symbol. Cuda error in func 'scanhash_neoscrypt' at line 96 : driver shutting down. Segmentation fault
I went looking for another miner to handle NeoScrypt and found NSGminer: https://bitcointalk.org/index.php?topic=712650.0git clone https://github.com/ghostlander/nsgminer cd nsgminer ./configure CFLAGS="-O2 -fomit-frame-pointer -DASM -DOPT -DMINER_4WAY -DSHA256 -march=native" --disable-adl --disable-nvml --without-curses make -j3
This miner normally tries to manage clock and fan settings by itself; we disable those so the other parts of nvOC that handle those still work. curses (full-screen interface) support is also disabled. The part of 3main that writes mph_conf.json then needs to be modified: "NeoScrypt": { "bin": "/home/m1/nsgminer/nsgminer -k neoscrypt -g 1 -w 64 -I 15 -o stratum+tcp://{HOST}:{PORT} -O {NAME}.{MINER}:x", ...
(If you're not using my MiningPoolHub auto-switcher, make the equivalent change elsewhere.) In limited testing, NSGminer appears to run a little bit faster on my 1070s than KTccminer did, but more extensive benchmarking (to include power measurements) is needed.
|
|
|
|
barista1992
|
|
January 17, 2018, 08:36:20 PM |
|
Hello, guys! Need your help mother - asus b250 mining expert GPU - nvidia 1060 (6 gb) dual memory - 8 gb nvOC - 19.1-4
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
January 17, 2018, 09:34:24 PM Last edit: January 17, 2018, 10:04:06 PM by papampi |
|
Hello, guys! Need your help mother - asus b250 mining expert GPU - nvidia 1060 (6 gb) dual memory - 8 gb nvOC - 19.1-4 It should pass, if not force reboot the rig. Its checking the SSD/USB.
|
|
|
|
Kieros
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 17, 2018, 09:58:01 PM |
|
I have started to use this mining software, its awesome.
I have 13x gtx 1070 but it seems the OC does not work at all what am I doing wrong? I tried doing it with the 1 BASH the only thing working is the powerlimit.
Also cards stay in state P2
I tried Nvidia settings but no overclocking there.
Since I am not so great at linux systems any help is greatly appriciated.
Thanks in advance!
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
January 17, 2018, 10:03:21 PM |
|
I have started to use this mining software, its awesome.
I have 13x gtx 1070 but it seems the OC does not work at all what am I doing wrong? I tried doing it with the 1 BASH the only thing working is the powerlimit.
Also cards stay in state P2
I tried Nvidia settings but no overclocking there.
Since I am not so great at linux systems any help is greatly appriciated.
Thanks in advance!
Please run this command and post the output:
|
|
|
|
Kieros
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 17, 2018, 10:19:43 PM |
|
Here is the report Software info: Report ver : v0019-2.0.002 nvOC (1bash) : nvOC v0019-2.0 - Community Release nvOC (3main) : nvOC v0019-2.0 - Community Release 1bash ver : v0019-2.0.003 3main ver : v0019-2.0.006 5watchdog ver : v0019-2.0.011 6tempcontrol v: v0019-2.0.003 wtm switch ver: v0019-2.0.0011 Kernel : 4.4.0-97-generic OS : Ubuntu 16.04.3 LTS System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) nvidia driver : 387.34 Hardware info: Motherboard : ASUS B250 MINING EXPERT Rev X.0x BIOS ver. : 0311 08/19/2017 CPU Model : Pentium(R) CPU G4400 @ 3.30GHz CPU Cores : 2 (Cores + Threads) Mem Total : 3894436 kB Mem Free : 246460 kB Swap Total : 0 kB Swap Free : 0 kB Ethernet : Intel I219-V
HDD and Partion info: NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT sda 111.8G disk 0 0 sata ATA KINGSTON SUV400S 96R9 ├─sda1 9M vfat part 0 0 └─sda2 13.7G ext4 part 0 0 /
VGA info: 00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
1bash settings: 1bash version .............: v0019-2.0.003 LOCAL or REMOTE ...........: LOCAL TEAMVIEWER started ........: YES SSH daemon started ........: YES SLOW_USB_KEY_MODE .........: NO SRR .......................: NO Watchdog ..................: YES
Temp Control ..............: YES TARGET_TEMP ...............: 65 __FAN_ADJUST ..............: 5 POWER_ADJUST ..............: 5 ALLOWED_TEMP_DIFF .........: 2 RESTORE_POWER_LIMIT .......: 90 MINIMAL_FAN_SPEED .........: 50
CLEAR_LOGS_ON_BOOT ........: NO AUTO_UPDATE ...............: STABLE AUTO_REBOOT ...............: NO _Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: NO TELEGRAM_ALERTS .: YES TELEGRAM_TYPE .............: papampi TELEGRAM_TIMEOUT_IN_MINUTES: 60 TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
P106_100_FULL_HEADLESS_MODE: NO GPUPowerMizerMode_Adjust...: NO POWERLIMIT (global) .......: YES POWERLIMIT_WATTS ..........: 120 CORE_OVERCLOCK (global)....: 100 MEMORY_OVERCLOCK (global) .: 400 MANUAL_FAN ................: NO ALGO_SPECIFIC_OC ..........: NO
GLOBAL_WORKERNAME .........: YES AUTO_WORKERNAME ...........: HOST WORKERNAME ................: 065 plusCPU ...................: YES threadCOUNT ...............: 4
ZM_or_EWBF ................: ZM
COIN ......................: DUAL_ETH_PASL DUAL_ETH_PASL_WORKER ................: DUAL_ETH_PASL_ADDRESS ...............: ... DUAL_ETH_PASL_POOL ..................:
WORK IN PROGRESS! Report script (beta release) *** If posting the Report on bitcointalk.org forum please copy everything between the including the and [\code] tags. This will ensure proper alignment when posting the Report.
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
January 17, 2018, 10:26:22 PM |
|
Here is the report Software info: Report ver : v0019-2.0.002 nvOC (1bash) : nvOC v0019-2.0 - Community Release nvOC (3main) : nvOC v0019-2.0 - Community Release 1bash ver : v0019-2.0.003 3main ver : v0019-2.0.006 5watchdog ver : v0019-2.0.011 6tempcontrol v: v0019-2.0.003 wtm switch ver: v0019-2.0.0011 Kernel : 4.4.0-97-generic OS : Ubuntu 16.04.3 LTS System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) nvidia driver : 387.34 Hardware info: Motherboard : ASUS B250 MINING EXPERT Rev X.0x BIOS ver. : 0311 08/19/2017 CPU Model : Pentium(R) CPU G4400 @ 3.30GHz CPU Cores : 2 (Cores + Threads) Mem Total : 3894436 kB Mem Free : 246460 kB Swap Total : 0 kB Swap Free : 0 kB Ethernet : Intel I219-V
HDD and Partion info: NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT sda 111.8G disk 0 0 sata ATA KINGSTON SUV400S 96R9 ├─sda1 9M vfat part 0 0 └─sda2 13.7G ext4 part 0 0 /
VGA info: 00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
1bash settings: 1bash version .............: v0019-2.0.003 LOCAL or REMOTE ...........: LOCAL TEAMVIEWER started ........: YES SSH daemon started ........: YES SLOW_USB_KEY_MODE .........: NO SRR .......................: NO Watchdog ..................: YES
Temp Control ..............: YES TARGET_TEMP ...............: 65 __FAN_ADJUST ..............: 5 POWER_ADJUST ..............: 5 ALLOWED_TEMP_DIFF .........: 2 RESTORE_POWER_LIMIT .......: 90 MINIMAL_FAN_SPEED .........: 50
CLEAR_LOGS_ON_BOOT ........: NO AUTO_UPDATE ...............: STABLE AUTO_REBOOT ...............: NO _Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: NO TELEGRAM_ALERTS .: YES TELEGRAM_TYPE .............: papampi TELEGRAM_TIMEOUT_IN_MINUTES: 60 TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
P106_100_FULL_HEADLESS_MODE: NO GPUPowerMizerMode_Adjust...: NO POWERLIMIT (global) .......: YES POWERLIMIT_WATTS ..........: 120 CORE_OVERCLOCK (global)....: 100 MEMORY_OVERCLOCK (global) .: 400 MANUAL_FAN ................: NO ALGO_SPECIFIC_OC ..........: NO
GLOBAL_WORKERNAME .........: YES AUTO_WORKERNAME ...........: HOST WORKERNAME ................: 065 plusCPU ...................: YES threadCOUNT ...............: 4
ZM_or_EWBF ................: ZM
COIN ......................: DUAL_ETH_PASL DUAL_ETH_PASL_WORKER ................: DUAL_ETH_PASL_ADDRESS ...............: ... DUAL_ETH_PASL_POOL ..................:
WORK IN PROGRESS! Report script (beta release) *** If posting the Report on bitcointalk.org forum please copy everything between the including the and [\code] tags. This will ensure proper alignment when posting the Report. When gnome terminal starts it should show the OC values and power limit that are applying to cards Does it shows them on your system? run and check it
|
|
|
|
Kieros
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 17, 2018, 10:34:04 PM |
|
I do not think so... GPU0 t=57C fan=52%, GPU1 t=53C fan=50%, GPU2 t=63C fan=37%, GPU3 t=63C fan=37%, GPU4 t=60C fan=56%, GPU5 t=56C fan=50%, GPU6 t=56C fan=50%, GPU7 t=55C fan=50%, GPU8 t=58C fan=0%, GPU9 t=56C fan=50%, GPU10 t=65C fan=41%, GPU11 t=59C fan=54%, GPU12 t=64C fan=40% nvOC v0019-2.0 - Community Release
nvOC v0019-2.0 - Community Release
cpuminer killed (pid 11528) ethdcrminer64 killed (pid 11892)
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
Wed Jan 17 15:31:55 2018 +-----------------------------------------------------------------------------+ | NVIDIA-SMI 387.34 Driver Version: 387.34 | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. | |===============================+======================+======================| | 0 GeForce GTX 1070 On | 00000000:01:00.0 Off | N/A | | 52% 57C P0 45W / 120W | 2788MiB / 8114MiB | 96% Default | +-------------------------------+----------------------+----------------------+ | 1 GeForce GTX 1070 On | 00000000:04:00.0 Off | N/A | | 50% 53C P0 44W / 120W | 2485MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 2 GeForce GTX 1070 On | 00000000:06:00.0 Off | N/A | | 37% 61C P0 40W / 120W | 2485MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 3 GeForce GTX 1070 On | 00000000:08:00.0 Off | N/A | | 37% 61C P0 47W / 115W | 2485MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 4 GeForce GTX 1070 On | 00000000:09:00.0 Off | N/A | | 56% 58C P0 45W / 120W | 2485MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 5 GeForce GTX 1070 On | 00000000:0A:00.0 Off | N/A | | 50% 56C P0 48W / 120W | 2485MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 6 GeForce GTX 1070 On | 00000000:0B:00.0 Off | N/A | | 50% 54C P0 44W / 120W | 2485MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 7 GeForce GTX 1070 On | 00000000:0C:00.0 Off | N/A | | 50% 54C P0 47W / 120W | 2485MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 8 GeForce GTX 1070 On | 00000000:0D:00.0 Off | N/A | | 51% 56C P0 45W / 120W | 2485MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 9 GeForce GTX 1070 On | 00000000:0E:00.0 Off | N/A | | 50% 54C P0 44W / 120W | 2485MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 10 GeForce GTX 1070 On | 00000000:0F:00.0 Off | N/A | | 41% 63C P0 46W / 115W | 2485MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 11 GeForce GTX 1070 On | 00000000:10:00.0 Off | N/A | | 54% 58C P0 47W / 120W | 2485MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 12 GeForce GTX 1070 On | 00000000:11:00.0 Off | N/A | | 40% 64C P0 47W / 115W | 2485MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ +-----------------------------------------------------------------------------+ | Processes: GPU Memory | | GPU PID Type Process name Usage | |=============================================================================| | 0 866 G /usr/lib/xorg/Xorg 178MiB | | 0 2390 G compiz 120MiB | | 0 22451 G /usr/bin/nvidia-settings 3MiB | +-----------------------------------------------------------------------------+
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:0]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:1]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:2]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:3]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:4]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:5]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:6]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:7]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:8]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:9]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:10]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:11]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:12]) assigned value 0.
Power limit for GPU 00000000:01:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:04:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:06:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:08:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:09:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:0A:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:0B:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:0C:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:0D:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:0E:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:0F:00.0 was set to 120.00 W from 115.00 W. Power limit for GPU 00000000:10:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:11:00.0 was set to 120.00 W from 115.00 W. All done.
LAUNCHING: plusCPU
plusCPU process in guake terminal Tab (f12)
LAUNCHING: MINER TEMPCONTROL
process in guake terminal Tab (f12), ~/nvOC temp-log
^CnvOC v0019-2.0 - Community Release
nvOC v0019-2.0 - Community Release
cpuminer killed (pid 27568)
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
Wed Jan 17 15:32:46 2018 +-----------------------------------------------------------------------------+ | NVIDIA-SMI 387.34 Driver Version: 387.34 | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. | |===============================+======================+======================| | 0 GeForce GTX 1070 On | 00000000:01:00.0 Off | N/A | | 50% 48C P0 48W / 120W | 305MiB / 8114MiB | 78% Default | +-------------------------------+----------------------+----------------------+ | 1 GeForce GTX 1070 On | 00000000:04:00.0 Off | N/A | | 0% 51C P0 36W / 120W | 2MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 2 GeForce GTX 1070 On | 00000000:06:00.0 Off | N/A | | 33% 53C P0 39W / 120W | 2MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 3 GeForce GTX 1070 On | 00000000:08:00.0 Off | N/A | | 31% 52C P0 41W / 120W | 2MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 4 GeForce GTX 1070 On | 00000000:09:00.0 Off | N/A | | 51% 48C P0 37W / 120W | 2MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 5 GeForce GTX 1070 On | 00000000:0A:00.0 Off | N/A | | 0% 51C P0 36W / 120W | 2MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 6 GeForce GTX 1070 On | 00000000:0B:00.0 Off | N/A | | 0% 53C P0 38W / 120W | 2MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 7 GeForce GTX 1070 On | 00000000:0C:00.0 Off | N/A | | 0% 54C P0 37W / 120W | 2MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 8 GeForce GTX 1070 On | 00000000:0D:00.0 Off | N/A | | 0% 48C P0 35W / 120W | 2MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 9 GeForce GTX 1070 On | 00000000:0E:00.0 Off | N/A | | 0% 53C P0 36W / 120W | 2MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 10 GeForce GTX 1070 On | 00000000:0F:00.0 Off | N/A | | 36% 54C P0 39W / 120W | 2MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 11 GeForce GTX 1070 On | 00000000:10:00.0 Off | N/A | | 51% 48C P0 36W / 120W | 2MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 12 GeForce GTX 1070 On | 00000000:11:00.0 Off | N/A | | 37% 55C P0 40W / 120W | 2MiB / 8114MiB | 0% Default | +-------------------------------+----------------------+----------------------+ +-----------------------------------------------------------------------------+ | Processes: GPU Memory | | GPU PID Type Process name Usage | |=============================================================================| | 0 866 G /usr/lib/xorg/Xorg 184MiB | | 0 2390 G compiz 120MiB | | 0 22451 G /usr/bin/nvidia-settings 3MiB | +-----------------------------------------------------------------------------+
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:0]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:1]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:2]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:3]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:4]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:5]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:6]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:7]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:8]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:9]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:10]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:11]) assigned value 0. Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:12]) assigned value 0.
Power limit for GPU 00000000:01:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:04:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:06:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:08:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:09:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:0A:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:0B:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:0C:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:0D:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:0E:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:0F:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:10:00.0 was set to 120.00 W from 120.00 W. Power limit for GPU 00000000:11:00.0 was set to 120.00 W from 120.00 W. All done.
LAUNCHING: plusCPU
plusCPU process in guake terminal Tab (f12)
LAUNCHING: MINER TEMPCONTROL
process in guake terminal Tab (f12), ~/nvOC temp-log
Auto Start Miner Set to YES
LAUNCHING: MINER WATCHDOG
process in guake terminal Tab (f12), ~/nvOC wdog-log
LAUNCHING: MINER SCREEN -dmSL miner /home/m1/eth/claymore/latest/ethdcrminer64 -epool eu1.ethermine.org:4444 -ewal 0xecbdb419ecccc82139728c1fd5b9017019cf9ec9.065 -epsw x -dpool stratum+tcp://mine.pasl.fairpool.xyz:4009 -dwal 3GhhbokyR3MABVthVnso9XznZ3h3gMyyRjSKdeypQ2aZSCUKwAcnvB9hRQ8qsYebUfQuquyoyLYoMYeto6pywDPNwEkyYzcuo2SSKu..065 -dpsw x -dcoin pasc -allcoins 1 -allpools 1 -dbg -1 PASC: Stratum - Failed to connect, retry in 20 sec... ETH: 01/17/18-15:31:36 - New job from eu1.ethermine.org:4444 ETH - Total Speed: 344.830 Mh/s, Total Shares: 148, Rejected: 0, Time: 00:29 ETH: GPU0 26.683 Mh/s, GPU1 26.351 Mh/s, GPU2 26.442 Mh/s, GPU3 26.367 Mh/s, GPU4 26.364 Mh/s, GPU5 26.644 Mh/s, GPU6 26.685 Mh/s, GPU7 26.587 Mh/s, GPU8 26.305 Mh/s, GPU9 26.432 Mh/s, GPU10 26.694 Mh/s, GPU11 26.679 Mh/s, GPU12 26.598 Mh/s PASC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0 PASC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s GPU0 t=57C fan=52%, GPU1 t=53C fan=50%, GPU2 t=63C fan=37%, GPU3 t=63C fan=37%, GPU4 t=60C fan=56%, GPU5 t=56C fan=50%, GPU6 t=56C fan=50%, GPU7 t=55C fan=50%, GPU8 t=58C fan=0%, GPU9 t=56C fan=50%, GPU10 t=65C fan=41%, GPU11 t=59C fan=54%, GPU12 t=64C fan=40% Cannot resolve 'mine.pasl.fairpool.xyz' PASC: Stratum - Cannot connect to mine.pasl.fairpool.xyz:4009 PASC: Stratum - Failed to connect, retry in 20 sec...
����������������������������������������������������������������ͻ � Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.2 � ����������������������������������������������������������������ͼ
ETH: 1 pool is specified Main Ethereum pool is eu1.ethermine.org:4444 PASC: 1 pool is specified Main Pascal pool is mine.pasl.fairpool.xyz:4009 AMD OpenCL platform not found Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool CUDA initializing...
NVIDIA Cards available: 13 CUDA Driver Version/Runtime Version: 9.1/8.0 GPU #0: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1
GPU #1: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1
GPU #2: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1
GPU #3: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1
GPU #4: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1
GPU #5: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1
GPU #6: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1
GPU #7: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1
GPU #8: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1
GPU #9: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1
GPU #10: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1
GPU #11: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1
GPU #12: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1
Total cards: 13 ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.239.100> port 4444 ETH: Stratum - Connected (eu1.ethermine.org:4444) ETH: Authorized DUAL MINING MODE ENABLED: ETHEREUM+PASCAL ETH: eth-proxy stratum mode "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details. "-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details. Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333
Setting DAG epoch #164... Cannot resolve 'mine.pasl.fairpool.xyz' PASC: Stratum - Cannot connect to mine.pasl.fairpool.xyz:4009 PASC: Stratum - Failed to connect, retry in 20 sec... ETH: 01/17/18-15:34:01 - New job from eu1.ethermine.org:4444 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s PASC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0 PASC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s Setting DAG epoch #164 for GPU0 Setting DAG epoch #164 for GPU1 Create GPU buffer for GPU0 Setting DAG epoch #164 for GPU2 Create GPU buffer for GPU2 Setting DAG epoch #164 for GPU3 Create GPU buffer for GPU3 Setting DAG epoch #164 for GPU5 Create GPU buffer for GPU5 Setting DAG epoch #164 for GPU7 Create GPU buffer for GPU7 Setting DAG epoch #164 for GPU9 Create GPU buffer for GPU9 Setting DAG epoch #164 for GPU11 Setting DAG epoch #164 for GPU12 Create GPU buffer for GPU12 Setting DAG epoch #164 for GPU4 Create GPU buffer for GPU4 Setting DAG epoch #164 for GPU8 Create GPU buffer for GPU8 Create GPU buffer for GPU11 Create GPU buffer for GPU1 Setting DAG epoch #164 for GPU6 Create GPU buffer for GPU6 Setting DAG epoch #164 for GPU10 Create GPU buffer for GPU10 ETH: 01/17/18-15:34:03 - New job from eu1.ethermine.org:4444 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s PASC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0 PASC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s GPU9 DAG creation time - 7048 ms Setting DAG epoch #164 for GPU9 done GPU12 DAG creation time - 7034 ms Setting DAG epoch #164 for GPU12 done GPU0 DAG creation time - 7036 ms Setting DAG epoch #164 for GPU0 done GPU7 DAG creation time - 7051 ms Setting DAG epoch #164 for GPU7 done GPU10 DAG creation time - 7024 ms Setting DAG epoch #164 for GPU10 done GPU6 DAG creation time - 7037 ms Setting DAG epoch #164 for GPU6 done GPU11 DAG creation time - 7042 ms Setting DAG epoch #164 for GPU11 done GPU8 DAG creation time - 7041 ms Setting DAG epoch #164 for GPU8 done GPU4 DAG creation time - 7075 ms Setting DAG epoch #164 for GPU4 done GPU5 DAG creation time - 7086 ms Setting DAG epoch #164 for GPU5 done GPU2 DAG creation time - 7103 ms Setting DAG epoch #164 for GPU2 done GPU1 DAG creation time - 7070 ms Setting DAG epoch #164 for GPU1 done GPU3 DAG creation time - 7115 ms
|
|
|
|
killeriq
Newbie
Offline
Activity: 22
Merit: 0
|
|
January 18, 2018, 12:26:59 AM |
|
To add Verge-Lyra2REv2 (XVG) to the selection of cryptocurrency in the 1bash and therefore also in the WTm switch: 1 / add this in the 1bash (just below the VTC variables you will copy / paste as a template): # Verge-Lyra2REv2(XVG) # ## No Need to add stratum+tcp:// to server address XVG_WORKER="$WORKERNAME" XVG_ADDRESS="Your_XVG_ADDRESS" # Bittrex Wallet Address (for me) XVG_POOL="lyra2v2.mine.zpool.ca" # 1.75% fee but i think this pool is more reliable than other. If you find better, i want it. XVG_PORT="4533" XVG_INTENSITY="21" Add this to the 0miner scrypt file (in the same way below the command to launch the VTC ccminer (and you can copy VTC but be careful to replace VTC_ by XVG_ in the whole command): if [ $COIN == "XVG" ] then HCD='/home/m1/ASccminer/ccminer' ADDR="$XVG_ADDRESS.$XVG_WORKER" screen -dmSL miner $HCD -a lyra2v2 -o stratum+tcp://$XVG_POOL:$XVG_PORT -u $ADDR -p c=XVG -i $XVG_INTENSITY fi
Finally, because there is more algo to mine XVG Coin, You have to disable the algo Groestl in your Whtatomine selection because in its GPU list, the WTM site lists both the XVG-Groestl and XVG-Lyra2Rev2 which makes a problem with the WTM_SWITCHER python script (need some modifications for multialgo coins recognization and listanng) ... It will be a small change like NIcehash previously posted on this thread to filter correctly the difference but I have not enough time tonight to make this change and test. Needless to say that if you mine another Goestl algo coins, you can't disable it in wtm page / URL ! Thus, think carefully about what you choose to do and decide whether or not to mine XVG in place of Groestl according to the best profit To disable this algo in the WTM list, just click on the blue button dedicated to this algorithm and proceed as usual with the Whattomine URL by adding the .json just behind https://whattomine.com/coins after you have made your request in your browser. To consult your pool balance : http://www.zpool.ca/?address=Your_XVG_ADDRESSNB: if you think there is a better ccminer than alexis for lyra2rev2, I'm interested. Same for better pool. EDIT : Other pools possibility : https://www.ahashpool.com/ => fee 1% http://pool.hashrefinery.com/ => fee 1.25% seems like you missed setting for Algo specific OC like this maybe? # lyra2vRev2 if [ $COIN == "MONA" -o $COIN == "VTC" -o $COIN == "XVG" ] then ALGORITHM="LYRA2REV2" POWERLIMIT_WATTS=125 __CORE_OVERCLOCK=135 MEMORY_OVERCLOCK=-1200
Also getting this error: 'c=XVG' what is it? doesnt look right... root@m1-desktop:~$./nvOC miner-log
*** Based on tpruvot@github ccminer *** Originally based on Christian Buchner and Christian H. project *** Include some of the work of djm34, sp, tsiv and klausT.
/home/m1/ASccminer/ccminer: unsupported non-option argument 'c=XVG' (see --help) [2018-01-18 01:25:21] Starting on stratum+tcp://xvg-lyra.suprnova.cc:2595 [2018-01-18 01:25:22] NVML GPU monitoring enabled. [2018-01-18 01:25:22] 12 miner threads started, using 'lyra2v2' algorithm. [2018-01-18 01:25:22] Stratum difficulty set to 32 (0.12500) [2018-01-18 01:25:34] GPU#3:Intensity set to 21, 2097152 cuda threads [2018-01-18 01:25:34] GPU#0:Intensity set to 21, 2097152 cuda threads [2018-01-18 01:25:34] GPU#7:Intensity set to 21, 2097152 cuda threads [2018-01-18 01:25:34] GPU#11:Intensity set to 21, 2097152 cuda threads [2018-01-18 01:25:34] GPU#1:Intensity set to 21, 2097152 cuda threads
|
|
|
|
leenoox
|
|
January 18, 2018, 03:38:14 AM |
|
Here is the report Software info: Report ver : v0019-2.0.002 nvOC (1bash) : nvOC v0019-2.0 - Community Release nvOC (3main) : nvOC v0019-2.0 - Community Release 1bash ver : v0019-2.0.003 3main ver : v0019-2.0.006 5watchdog ver : v0019-2.0.011 6tempcontrol v: v0019-2.0.003 wtm switch ver: v0019-2.0.0011 Kernel : 4.4.0-97-generic OS : Ubuntu 16.04.3 LTS System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) nvidia driver : 387.34 Hardware info: Motherboard : ASUS B250 MINING EXPERT Rev X.0x BIOS ver. : 0311 08/19/2017 CPU Model : Pentium(R) CPU G4400 @ 3.30GHz CPU Cores : 2 (Cores + Threads) Mem Total : 3894436 kB Mem Free : 246460 kB Swap Total : 0 kB Swap Free : 0 kB Ethernet : Intel I219-V
HDD and Partion info: NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT sda 111.8G disk 0 0 sata ATA KINGSTON SUV400S 96R9 ├─sda1 9M vfat part 0 0 └─sda2 13.7G ext4 part 0 0 /
VGA info: 00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
1bash settings: 1bash version .............: v0019-2.0.003 LOCAL or REMOTE ...........: LOCAL TEAMVIEWER started ........: YES SSH daemon started ........: YES SLOW_USB_KEY_MODE .........: NO SRR .......................: NO Watchdog ..................: YES
Temp Control ..............: YES TARGET_TEMP ...............: 65 __FAN_ADJUST ..............: 5 POWER_ADJUST ..............: 5 ALLOWED_TEMP_DIFF .........: 2 RESTORE_POWER_LIMIT .......: 90 MINIMAL_FAN_SPEED .........: 50
CLEAR_LOGS_ON_BOOT ........: NO AUTO_UPDATE ...............: STABLE AUTO_REBOOT ...............: NO _Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: NO TELEGRAM_ALERTS .: YES TELEGRAM_TYPE .............: papampi TELEGRAM_TIMEOUT_IN_MINUTES: 60 TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
P106_100_FULL_HEADLESS_MODE: NO GPUPowerMizerMode_Adjust...: NO POWERLIMIT (global) .......: YES POWERLIMIT_WATTS ..........: 120 CORE_OVERCLOCK (global)....: 100 MEMORY_OVERCLOCK (global) .: 400 MANUAL_FAN ................: NO ALGO_SPECIFIC_OC ..........: NO
GLOBAL_WORKERNAME .........: YES AUTO_WORKERNAME ...........: HOST WORKERNAME ................: 065 plusCPU ...................: YES threadCOUNT ...............: 4
ZM_or_EWBF ................: ZM
COIN ......................: DUAL_ETH_PASL DUAL_ETH_PASL_WORKER ................: DUAL_ETH_PASL_ADDRESS ...............: ... DUAL_ETH_PASL_POOL ..................:
WORK IN PROGRESS! Report script (beta release) *** If posting the Report on bitcointalk.org forum please copy everything between the including the and [\code] tags. This will ensure proper alignment when posting the Report. You have the on-board video enabled which causes lots of problems. Enter the bios and disable it. Connect your monitor to the GPU that is installed in the x16 (long) slot.
|
|
|
|
leenoox
|
|
January 18, 2018, 03:41:23 AM |
|
Hello, guys! Need your help mother - asus b250 mining expert GPU - nvidia 1060 (6 gb) dual memory - 8 gb nvOC - 19.1-4 It should pass, if not force reboot the rig. Its checking the SSD/USB. Wow, haven't seen one of those monitors in a while
|
|
|
|
car1999
|
|
January 18, 2018, 05:13:23 AM |
|
SSD-USB resize and add swap - Guide - nvOC-v0019-2.0 Community Release.
Open Gparted, root password is miner1, Locate your drive, there are 2 partitions, a 9Mb fat, a 16Gb ext4 and a free unused space at the end. Right click on the unused space, create new partition, "Partition Type : Swap" make the size you want (1Gb up to Ram size) grab and move it to the end of drive. Apply. Right clcik on the primary 16gb partition, resize/move, resize it to the desired size (better to give it all). Apply. Right click on the swap partition and get the info, copy the UUID. open /etc/fstab with this command You will see a line which refers to a swap partition during installation ... Some thing similar to this : #swap was on /dev/sda5 during installation UUID=cdba7b01-5ae6-4104-9a6e-f723b8bd87ac none swap sw 0 0
Change the UUID with the one you copied from newly made swap partition. Save and close gedit. Activate swap: It will read your fstab and enable the swap partition. Check it with free command in terminal #free
total used free shared buff/cache available Mem: 8171388 3020388 2637404 142044 2513596 4647472
Swap: 8123388 0 8123388
Check partition size with reboot I was wondering if I was suppose to do the same when I'm actually using an HDD. It's not working, I'm not able to update! Can you help me ? It should work on all HDD/SSD/USB Some where you make a mistake, read and go through again. Maybe I don't undestand where i should load the file ? I'm just gonna tell you how I did it : I load the File on gdrive. Then I run the : cd /home/m1/Downloads wget https://www.dropbox.com/s/cyo86xoqotplges/nvOC-19-2-updatebash /home/m1/Downloads/nvOC-19-2-update Then I change de 1bash file that been load and try to resize and the error is : (gedit:3854): Gtk-WARNING **: Calling Inhibit failed: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files ** (gedit:3854): WARNING **: Set document metadata failed: Setting attribute metadata::gedit-spell-enabled not supported ** (gedit:3854): WARNING **: Set document metadata failed: Setting attribute metadata::gedit-encoding not supported ** (gedit:3854): WARNING **: Set document metadata failed: Setting attribute metadata::gedit-position not supported NEVER MIND It finally worked. I just forget to turn on the swap on gparted Thanks @PAPAMPI as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?
|
|
|
|
Kieros
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 18, 2018, 06:16:20 AM |
|
Here is the report Software info: Report ver : v0019-2.0.002 nvOC (1bash) : nvOC v0019-2.0 - Community Release nvOC (3main) : nvOC v0019-2.0 - Community Release 1bash ver : v0019-2.0.003 3main ver : v0019-2.0.006 5watchdog ver : v0019-2.0.011 6tempcontrol v: v0019-2.0.003 wtm switch ver: v0019-2.0.0011 Kernel : 4.4.0-97-generic OS : Ubuntu 16.04.3 LTS System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) nvidia driver : 387.34 Hardware info: Motherboard : ASUS B250 MINING EXPERT Rev X.0x BIOS ver. : 0311 08/19/2017 CPU Model : Pentium(R) CPU G4400 @ 3.30GHz CPU Cores : 2 (Cores + Threads) Mem Total : 3894436 kB Mem Free : 246460 kB Swap Total : 0 kB Swap Free : 0 kB Ethernet : Intel I219-V
HDD and Partion info: NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT sda 111.8G disk 0 0 sata ATA KINGSTON SUV400S 96R9 ├─sda1 9M vfat part 0 0 └─sda2 13.7G ext4 part 0 0 /
VGA info: 00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
1bash settings: 1bash version .............: v0019-2.0.003 LOCAL or REMOTE ...........: LOCAL TEAMVIEWER started ........: YES SSH daemon started ........: YES SLOW_USB_KEY_MODE .........: NO SRR .......................: NO Watchdog ..................: YES
Temp Control ..............: YES TARGET_TEMP ...............: 65 __FAN_ADJUST ..............: 5 POWER_ADJUST ..............: 5 ALLOWED_TEMP_DIFF .........: 2 RESTORE_POWER_LIMIT .......: 90 MINIMAL_FAN_SPEED .........: 50
CLEAR_LOGS_ON_BOOT ........: NO AUTO_UPDATE ...............: STABLE AUTO_REBOOT ...............: NO _Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: NO TELEGRAM_ALERTS .: YES TELEGRAM_TYPE .............: papampi TELEGRAM_TIMEOUT_IN_MINUTES: 60 TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
P106_100_FULL_HEADLESS_MODE: NO GPUPowerMizerMode_Adjust...: NO POWERLIMIT (global) .......: YES POWERLIMIT_WATTS ..........: 120 CORE_OVERCLOCK (global)....: 100 MEMORY_OVERCLOCK (global) .: 400 MANUAL_FAN ................: NO ALGO_SPECIFIC_OC ..........: NO
GLOBAL_WORKERNAME .........: YES AUTO_WORKERNAME ...........: HOST WORKERNAME ................: 065 plusCPU ...................: YES threadCOUNT ...............: 4
ZM_or_EWBF ................: ZM
COIN ......................: DUAL_ETH_PASL DUAL_ETH_PASL_WORKER ................: DUAL_ETH_PASL_ADDRESS ...............: ... DUAL_ETH_PASL_POOL ..................:
WORK IN PROGRESS! Report script (beta release) *** If posting the Report on bitcointalk.org forum please copy everything between the including the and [\code] tags. This will ensure proper alignment when posting the Report. You have the on-board video enabled which causes lots of problems. Enter the bios and disable it. Connect your monitor to the GPU that is installed in the x16 (long) slot. Thank you I will try this ASAP and let you know if it worked. However there is no monitor connected at all does it matter?
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
January 18, 2018, 06:46:01 AM Last edit: January 18, 2018, 08:31:56 AM by papampi |
|
as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?
Working on it for v0019-2.1
|
|
|
|
mtx_demon
|
|
January 18, 2018, 08:45:49 AM |
|
Do you guys already have ccminer KlausT??
|
|
|
|
LuKePicci
Jr. Member
Offline
Activity: 128
Merit: 1
|
|
January 18, 2018, 10:04:01 AM |
|
as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?
Working on it for v0019-2.1 Hey papampi, why not providing also the image of just the system partition and not the whole drive? May be very useful in case of re-imaging where nvOC is installed for example in dual-boot systems.
|
|
|
|
|