Baikal Giant X10

[ismurdegus]

try d=88

My hero.  I had assumed that since the pools said they auto-adjusted the difficulty, I wouldn't need to set it manually, but this setting worked.  Thanks!

I have the same issue with my X10

Where I suppose insert the d=88  ?

Thanks

[1714947608]

1714947608

[d0lph]

try d=88

My hero.  I had assumed that since the pools said they auto-adjusted the difficulty, I wouldn't need to set it manually, but this setting worked.  Thanks!

I have the same issue with my X10

Where I suppose insert the d=88  ?

Thanks

into password

[ismurdegus]

try d=88

My hero.  I had assumed that since the pools said they auto-adjusted the difficulty, I wouldn't need to set it manually, but this setting worked.  Thanks!

I have the same issue with my X10

Where I suppose insert the d=88  ?

Thanks

into password

Hi
Sorry but I am little bit confuse.....

I am mining on xvg-mg.suprnova and the password is the worker password.

Is this will work on xvg-mg.suprnova? If YES, inside the password space I need wrote:  cicciod=88  (my password and d=88) ?

Thanks

[d0lph]

try d=88

My hero.  I had assumed that since the pools said they auto-adjusted the difficulty, I wouldn't need to set it manually, but this setting worked.  Thanks!

I have the same issue with my X10

Where I suppose insert the d=88  ?

Thanks

into password

Hi
Sorry but I am little bit confuse.....

I am mining on xvg-mg.suprnova and the password is the worker password.

Is this will work on xvg-mg.suprnova? If YES, inside the password space I need wrote:  cicciod=88  (my password and d=88) ?

Thanks

need write:
yourpass d=88

[Aimless]

try d=88

My hero.  I had assumed that since the pools said they auto-adjusted the difficulty, I wouldn't need to set it manually, but this setting worked.  Thanks!

I have the same issue with my X10

Where I suppose insert the d=88  ?

Thanks

into password

Hi
Sorry but I am little bit confuse.....

I am mining on xvg-mg.suprnova and the password is the worker password.

Is this will work on xvg-mg.suprnova? If YES, inside the password space I need wrote:  cicciod=88  (my password and d=88) ?

Thanks

need write:
yourpass d=88

Yes, you need to leave a gap between each command

[ismurdegus]

try d=88

My hero.  I had assumed that since the pools said they auto-adjusted the difficulty, I wouldn't need to set it manually, but this setting worked.  Thanks!

I have the same issue with my X10

Where I suppose insert the d=88  ?

Thanks

into password

Hi
Sorry but I am little bit confuse.....

I am mining on xvg-mg.suprnova and the password is the worker password.

Is this will work on xvg-mg.suprnova? If YES, inside the password space I need wrote:  cicciod=88  (my password and d=88) ?

Thanks

need write:
yourpass d=88

Yes, you need to leave a gap between each command

Thanks I will give it a go

[ismurdegus]

try d=88

My hero.  I had assumed that since the pools said they auto-adjusted the difficulty, I wouldn't need to set it manually, but this setting worked.  Thanks!

I have the same issue with my X10

Where I suppose insert the d=88  ?

Thanks

into password

Hi
Sorry but I am little bit confuse.....

I am mining on xvg-mg.suprnova and the password is the worker password.

Is this will work on xvg-mg.suprnova? If YES, inside the password space I need wrote:  cicciod=88  (my password and d=88) ?

Thanks

need write:
yourpass d=88

Yes, you need to leave a gap between each command

No is not working for me.
I am still having up and down in hash power on the pool. From 7000KH/s to 12000KH/s .

[acyclovir]

Hello
Is there a way to build the Baikal X10 and B into the Awesome Miner for Profitswith?
Is there any guidance for this or is there something on Youtube.
I would be very happy about a link.

I have good experience with AM (AntMiners, RIGS, Baikal, X10) But english is not my native language, i am spanish speaker, my english is poor, i have helped some people with the configuration of AM, via TeamViewer, I could help you if you want, obviously all by your sight, each TeamViewer movement, or configuration, you could be able to verify in real time, however... I recommend a threshold of 20 and for profit switching time not less than 30 min an max 3 pools for profit

[JohnSch]

What coin are you guys currently mining? I am currently mining Qubit-Digibyte at $38 a day. 

[Kilomans]

Damn thing went off-line 2 times in the past 48 hours which is really bad because it always does it when I'm not around, or asleep.

Another 7 hours off-line without warning.  I don't think I need to tell anyone here how much $ that is... or how I can't get the opportunity back.

Leave the miner's side at your own risk! This thing needs a babysitter.

[JohnSch]

Damn thing went off-line 2 times in the past 48 hours which is really bad because it always does it when I'm not around, or asleep.

Another 7 hours off-line without warning.  I don't think I need to tell anyone here how much $ that is... or how I can't get the opportunity back.

Leave the miner's side at your own risk! This thing needs a babysitter.

this happens to me too, you could use a smart plug to restart the miner remotely when you are not home.

https://www.amazon.com/TP-Link-Required-Control-Anywhere-HS100/dp/B0178IC734/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=gpuz-20&linkId=3f499bc540253d7e11cadb15f1901f72

[Shorty2520]

Damn thing went off-line 2 times in the past 48 hours which is really bad because it always does it when I'm not around, or asleep.

Another 7 hours off-line without warning.  I don't think I need to tell anyone here how much $ that is... or how I can't get the opportunity back.

Leave the miner's side at your own risk! This thing needs a babysitter.

Set email notification on the mining pool you use and buy wlan sockets.

Some here make a reset every night, but in my opinion that is to much. Most of the devices run 1-2 weeks before a failure comes up.
I restart them manually with wlan sockets.

[aerodynomic]

Damn thing went off-line 2 times in the past 48 hours which is really bad because it always does it when I'm not around, or asleep.

Another 7 hours off-line without warning.  I don't think I need to tell anyone here how much $ that is... or how I can't get the opportunity back.

Leave the miner's side at your own risk! This thing needs a babysitter.

this happens to me too, you could use a smart plug to restart the miner remotely when you are not home.

https://www.amazon.com/TP-Link-Required-Control-Anywhere-HS100/dp/B0178IC734/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=gpuz-20&linkId=3f499bc540253d7e11cadb15f1901f72

I've literally never had mine ever cut off in its entire lifetime. How hot are they running?

[Shorty2520]

Mine are running between 18-21 degrees celsius, pi board should be around 32-34.

[aerodynomic]

Mine are running between 18-21 degrees celsius, pi board should be around 32-34.

Does your internet ever cut out? That will cause the miner to go down and sometimes need to be reset.

[darkly spectre]

I wonder if we will see the two extra algos this month

[bitcoinexplorer]

I wonder if we will see the two extra algos this month

Its a long time, Baikal should post their plans regarding this.

[whitefire990]

I wonder if we will see the two extra algos this month

Its a long time, Baikal should post their plans regarding this.

It's pretty clear the original guess of NIST5 & Groestl is correct, at least for NIST5.   I have been watching the nethash on Bulwark and you can literally see Baikal turning on/off hundreds of miners.  Bulwark NIST5 nethash goes from 1.7 to 3.6 TH/s instantly, holds for a few hours, then back again. 

[bitcoinexplorer]

I wonder if we will see the two extra algos this month

Its a long time, Baikal should post their plans regarding this.

It's pretty clear the original guess of NIST5 & Groestl is correct, at least for NIST5.   I have been watching the nethash on Bulwark and you can literally see Baikal turning on/off hundreds of miners.  Bulwark NIST5 nethash goes from 1.7 to 3.6 TH/s instantly, holds for a few hours, then back again. 

You are so intelligent ...

[aerodynomic]

Cannot wait till theyre released, ROI again