AlexanderDumas
Newbie
Offline
Activity: 206
Merit: 0
|
|
April 02, 2018, 03:02:08 PM Last edit: April 02, 2018, 06:01:27 PM by AlexanderDumas |
|
Yeah... so I got a little too excited too soon. Definitely have my overclocks well within previous working ranges, and yet after mining for a while cards will randomly start hashing ~100-200 H/s. Very strange... I can exit the miner without it hanging and having to restart, but still, can't be around to monitor the machines.
Will probably pull out the old JJHashRateMonitor modified for CAST and see if that can take care of it, since --ratewatchdog can't fix this problem. We're getting close though!
I had a similar experience. 2 RX Vega 64s on 18.3.4 driver, PCIE set to GEN1, power play tables etc. Rates are good (maybe about 2% better than with cast 0.9.0) and temps are maybe 1 deg C lower. After a few hours though both cards dropped down to ~ 400-500 H/s. I saw there were kernel resets in the miner, but they were unable to restore the full speed (~3900 H/s). Was able to exit gracefully and restart. Now running without the --ratewatchdog option. My suspicion is that the kernel resets are themselves responsible for the strange rates - these are hashrates (~400-500 H/s per card) I've never had in the past. It could be in the past the miner would hang/system would crash prompted by whatever prompted the initial fall and kernel resets however. More to be learned. Regardless, the implementation of (an eventually working native) option like ratewatchdog is sorely needed, so this initial development is applauded! Hope it continues... Unfortunately after 2 days of running flawlessly, I began experiencing the rate drop to 200hs or thereabout. I removed the -ratewatchdog and everything went back to normal. I made a couple of tests: with and without. Not using the -ratewatchdog is definitively working better for me. One thing to note is that the developer stated that the -ratewatchdog was experimental.
|
|
|
|
tf2addict
|
|
April 02, 2018, 06:06:44 PM Last edit: April 03, 2018, 05:46:23 PM by tf2addict |
|
Is 0.9.2 ready for the Sumo fork happening in the next few days?
|
|
|
|
P00P135
|
|
April 03, 2018, 01:55:54 PM |
|
|
|
|
|
MaxMidnite
Newbie
Offline
Activity: 143
Merit: 0
|
|
April 03, 2018, 05:43:03 PM |
|
Hey man I been using CryptoNote AMD GPU Miner v11.2 and wish to move to your miner.
I have 6 RX580 cards, the hash rate with his miner is more, not sure if you plan to do update to improve hash rate on non Vega ATI CARDS?
Any news would be great?
|
|
|
|
bubaba
Jr. Member
Offline
Activity: 69
Merit: 2
|
|
April 03, 2018, 06:08:29 PM |
|
hi guys
i just tried the new version 0.92 with my 4 vegas(3x64s1x56). Im hasing around 7900 but the miner freezes everytime after some hours. The LEDs(Powercolour,RedDevil) are still all on but there is no hashing. While frozen i cant close the miner and i cant shutdown the pc without hard resetting. I also dont get an email due to hashrate drops or miner not mining anymore. Im using same settings and reg files as on my other rig(which is stable).
windows 10 Gigabyte Board gpus connected via riser Adrenalin 18.3.4
Is there an option to check what is causing the crash. Anybody else experiencing such behaviour?
greets
|
|
|
|
RAJNIFICENT
Newbie
Offline
Activity: 16
Merit: 0
|
|
April 04, 2018, 12:58:04 AM |
|
I tried the new version 0.92 with my 4 vegas 56 the miner freezes everytime after some hours with nicehash --algo=0 Increase your virtual ram (page file) to 60GB
|
|
|
|
kristikun
Newbie
Offline
Activity: 62
Merit: 0
|
|
April 04, 2018, 08:54:25 AM Last edit: April 04, 2018, 09:15:31 AM by kristikun |
|
hi guys
i just tried the new version 0.92 with my 4 vegas(3x64s1x56). Im hasing around 7900 but the miner freezes everytime after some hours. The LEDs(Powercolour,RedDevil) are still all on but there is no hashing. While frozen i cant close the miner and i cant shutdown the pc without hard resetting. I also dont get an email due to hashrate drops or miner not mining anymore. Im using same settings and reg files as on my other rig(which is stable).
windows 10 Gigabyte Board gpus connected via riser Adrenalin 18.3.4
Is there an option to check what is causing the crash. Anybody else experiencing such behaviour?
greets
Im having the same issue after i updated to 0.92 version but im still using compute drivers , soft power tables etc... hashrate has gone up on around 15+- on each card but the miner gets stucks sometime its after 3 days some time its after 4 hours .. i will rollback to 0.91 ? IM prety sure its not Virtual memory issue as i have 80gb for 5x cards...
|
|
|
|
coke15
Member
Offline
Activity: 176
Merit: 10
|
|
April 04, 2018, 09:52:00 AM |
|
hi i have a problem with the 2 last version : -banned ip or -un authorized. the problem is cast still mining :/i loose 6 hours this night :/ it have hasrate,it have internet connect but no connection with pool. i stop it ,i relunch it and it work how to force cast to stop itself and rebegin?
|
|
|
|
duyquang06
Newbie
Offline
Activity: 154
Merit: 0
|
|
April 04, 2018, 10:36:22 AM |
|
In ver 0.9.2, my VEGAs 56 fan suddenly go above 4000rpm, even 4800rpm. WTF.... In ver 0.8 - 0.9 my vgas often go though 3500-3800rpm ....
|
|
|
|
Aris_Eng
Newbie
Offline
Activity: 74
Merit: 0
|
|
April 04, 2018, 11:21:31 AM |
|
hi i have a problem with the 2 last version : -banned ip or -un authorized. the problem is cast still mining :/i loose 6 hours this night :/ it have hasrate,it have internet connect but no connection with pool. i stop it ,i relunch it and it work how to force cast to stop itself and rebegin? Can't remember where I got it from originally, but here it is: Create a new .bat file (create a txt file and rename to .bat), call it whatever you like. Inside, copy and paste the following (I use vega 64, Devcon and OverdriveNTool, skip that part if not using it: cd C:\YOURPATHHERE\cast_xmr-vega-win64_080
timeout /t 5
devcon.exe disable "PCI\VEN_1002&DEV_687F"
timeout /t 10
devcon.exe enable "PCI\VEN_1002&DEV_687F"
timeout /t 5
OverdriveNTool.exe -p0UTube -p1UTube -p2UTube -p3UTube
timeout /t 5
@echo off
echo ------------------------------------------------------------------- echo Restarts the miner every 60 minutes //you can set it to your own liking echo ------------------------------------------------------------------- echo:
set executable=cast_xmr-vega.exe set commandline= -G 0,1,2,3 -S POOLHERE:PORTHERE -u YOURWALLETHERE -p x --nonicehash --fastjobswitch %* set runforseconds=3600 set restartinseconds=20 set /a counter=0 timeout 2 :start start "cast_xmr-vega" %executable% %commandline% echo: echo The program is going to run for %runforseconds% seconds timeout %runforseconds% taskkill /f /im %executable% cd startup YOURFILENAMEHERE.bat echo: echo Restarting the app in %restartinseconds% seconds (%counter%) timeout %restartinseconds% set /a counter+=1 echo: echo: goto startReplace everything in Bold with your own info. Because I use devcon, I run it as an administrator, and then it restarts itself every hour.
|
|
|
|
AlexanderDumas
Newbie
Offline
Activity: 206
Merit: 0
|
|
April 04, 2018, 02:54:08 PM |
|
hi guys
i just tried the new version 0.92 with my 4 vegas(3x64s1x56). Im hasing around 7900 but the miner freezes everytime after some hours. The LEDs(Powercolour,RedDevil) are still all on but there is no hashing. While frozen i cant close the miner and i cant shutdown the pc without hard resetting. I also dont get an email due to hashrate drops or miner not mining anymore. Im using same settings and reg files as on my other rig(which is stable).
windows 10 Gigabyte Board gpus connected via riser Adrenalin 18.3.4
Is there an option to check what is causing the crash. Anybody else experiencing such behaviour?
greets
Im having the same issue after i updated to 0.92 version but im still using compute drivers , soft power tables etc... hashrate has gone up on around 15+- on each card but the miner gets stucks sometime its after 3 days some time its after 4 hours .. i will rollback to 0.91 ? IM prety sure its not Virtual memory issue as i have 80gb for 5x cards... Actually upgrading the drivers and not rolling back to the old software could solve your problem. I did it for me. I had the exact same problem of GPU freezing on the miner, while all the red light were still on, like described by the poster above. Upgrading to new andrenaline drivers, solved it right away. And also I do not use the -ratewatchdog command, because it was creating rate drops... Anyway: new Andrenalin driver, Cast 9.02, soft play tables 1100, no -ratewatchdog and my rig has been working well with great rate and temps for a few days. Try that.
|
|
|
|
carlosmonaco
Newbie
Offline
Activity: 105
Merit: 0
|
|
April 04, 2018, 06:24:08 PM |
|
Do I have to use the latest windows 10 (1709 ) to use the latest adrenaline drivers ? For now I'm using a custom windows 10 LSTB 2016 with BC drivers
|
|
|
|
nader1
Newbie
Offline
Activity: 18
Merit: 0
|
|
April 04, 2018, 07:37:12 PM |
|
Hi dev, we are lot of people mining haven xhv. Switched now to New algo cryptonight heavy. Do u Plan to make cast xmr Work with cryptonight heavy? Would be awsome. Ty
|
|
|
|
rbrcpa
Copper Member
Jr. Member
Offline
Activity: 62
Merit: 1
|
|
April 04, 2018, 10:52:18 PM |
|
Hi dev, we are lot of people mining haven xhv. Switched now to New algo cryptonight heavy. Do u Plan to make cast xmr Work with cryptonight heavy? Would be awsome. Ty
Wondering the same thing. Sumo also forked to Cryptonight-heavy. Not sure if Cast XMR supports it now or not.
|
|
|
|
polkovnik
Newbie
Offline
Activity: 35
Merit: 0
|
|
April 04, 2018, 10:56:14 PM |
|
agreed, please update miner for HAVEN coin, XMR-Stak Haven on Vega64 gets only 470h/s, using xmr-cast 092 get only errors
|
|
|
|
tf2addict
|
|
April 05, 2018, 03:16:35 AM |
|
Please support Sumo/Heavy algo ASAP. Stak is so unstable and their config files are a nightmare.
|
|
|
|
djkice
Member
Offline
Activity: 99
Merit: 10
|
|
April 05, 2018, 03:42:21 AM |
|
I'm sure he will implement just be patient and give him some time.
|
|
|
|
m.vina
|
|
April 05, 2018, 03:45:27 AM |
|
Please support Sumo/Heavy algo ASAP. Stak is so unstable and their config files are a nightmare.
+1 for this. CastXMR is much more useable than XMR-STAK. Insane amount of profitability on the SumoKoin's cryptonight-heavy algorithm as of the past few hours. Seems like it was very effective in killing all those cryptonight ASICs.
|
|
|
|
4ward
Member
Offline
Activity: 473
Merit: 18
|
|
April 05, 2018, 05:50:32 AM |
|
Please support Sumo/Heavy algo ASAP. Stak is so unstable and their config files are a nightmare.
+1 for this. CastXMR is much more useable than XMR-STAK. Insane amount of profitability on the SumoKoin's cryptonight-heavy algorithm as of the past few hours. Seems like it was very effective in killing all those cryptonight ASICs. i believe its mostly unprepared miners that were killed ))
|
|
|
|
cryptoreporting
Newbie
Offline
Activity: 10
Merit: 0
|
|
April 05, 2018, 05:57:05 AM |
|
Will you be updating to support Cryptonight-Heavy implementation that SumoKoin just implemented in their fork?
|
|
|
|
|