[OLD] Eligius: ASIC, no registration, no fee CPPSRB BTC + 105% PPS NMC, 877 #

[Luke-Jr]

wizkid057,Luke-Jr,

Can you share instructions how to install bfgminer on KncMiner Jupiter? Temporarily or permanently?

https://github.com/luke-jr/bfgminer/blob/bfgminer/README.ASIC#L153

Posts on Github < https://github.com/luke-jr/bfgminer/issues/340 > indicate ongoing bfgminer issues with November Jupiter firmware - as far as I can see - so looks like I'm stuck with cgminer until KNC updates firmware?

There's a suggested workaround in that github issue until they fix it.
If anyone wants to share a known-working workaround patch, I can setup a branch to make it easier...

[Biffa]

wizkid057,Luke-Jr,

Can you share instructions how to install bfgminer on KncMiner Jupiter? Temporarily or permanently?

https://github.com/luke-jr/bfgminer/blob/bfgminer/README.ASIC#L153

Posts on Github < https://github.com/luke-jr/bfgminer/issues/340 > indicate ongoing bfgminer issues with November Jupiter firmware - as far as I can see - so looks like I'm stuck with cgminer until KNC updates firmware?

There's a suggested workaround in that github issue until they fix it.
If anyone wants to share a known-working workaround patch, I can setup a branch to make it easier...

Any chance of getting a pre-compiled bfgminer like we can get for cgminer?

[Luke-Jr]

wizkid057,Luke-Jr,

Can you share instructions how to install bfgminer on KncMiner Jupiter? Temporarily or permanently?

https://github.com/luke-jr/bfgminer/blob/bfgminer/README.ASIC#L153

Posts on Github < https://github.com/luke-jr/bfgminer/issues/340 > indicate ongoing bfgminer issues with November Jupiter firmware - as far as I can see - so looks like I'm stuck with cgminer until KNC updates firmware?

There's a suggested workaround in that github issue until they fix it.
If anyone wants to share a known-working workaround patch, I can setup a branch to make it easier...

Any chance of getting a pre-compiled bfgminer like we can get for cgminer?

Bertmod has been distributing binaries.
Problem is either they or I would need a known-working workaround patch...
I don't have a Nov unit to test on.

[valtiel]

Estimated Position in Payout Queue
333.26938784 BTC are ahead in queue, putting this user's payout after a 13 block delay.

what happened with the payouts? 13 blocks are too much.

[Biffa]

Estimated Position in Payout Queue
333.26938784 BTC are ahead in queue, putting this user's payout after a 13 block delay.

what happened with the payouts? 13 blocks are too much.

Mine just went through.

[mchu168]

Estimated Position in Payout Queue
333.26938784 BTC are ahead in queue, putting this user's payout after a 13 block delay.

what happened with the payouts? 13 blocks are too much.

I've been in the queue for about a day and a half...  Maybe BTC will be back to $1000 when I get my coins.   

[phrog]

wizkid057,Luke-Jr,

Can you share instructions how to install bfgminer on KncMiner Jupiter? Temporarily or permanently?

https://github.com/luke-jr/bfgminer/blob/bfgminer/README.ASIC#L153

Posts on Github < https://github.com/luke-jr/bfgminer/issues/340 > indicate ongoing bfgminer issues with November Jupiter firmware - as far as I can see - so looks like I'm stuck with cgminer until KNC updates firmware?

There's a suggested workaround in that github issue until they fix it.
If anyone wants to share a known-working workaround patch, I can setup a branch to make it easier...

This what you're in need of?
https://github.com/jaketri/bfgminer/commit/6e934507dc10eb1ab9d5fa7918f316a7956aefe3

[jamesg]

Are there blocks that need to be paid out? Seems the payout queue has gotten a little long.

[wizkid057]

Are there blocks that need to be paid out? Seems the payout queue has gotten a little long.

Yes, I need to do a manual payout, but I've been busy and haven't gotten to it.  I will try to make sure it is done today.

[jamesg]

Are there blocks that need to be paid out? Seems the payout queue has gotten a little long.

Yes, I need to do a manual payout, but I've been busy and haven't gotten to it.  I will try to make sure it is done today.

Thanks wizkid.

[djjacket]

Is something going on with the Block List stats page or do we have any issue with the past 3 discovered blocks?  There are no Block Hashes, Round Duration, Accepted Shares, etc...

It looks like there was a stale Block and the subsequent blocks have no data.   

[davebodger]

Is something going on with the Block List stats page or do we have any issue with the past 3 discovered blocks?  There are no Block Hashes, Round Duration, Accepted Shares, etc...

It looks like there was a stale Block and the subsequent blocks have no data.   

I think the round timer has stopped working properly too, it keeps incrementing and not resetting when a new block happens.
Payments seem to be added correctly though so no worries.
I'm sure wizkid will fix it when he has time.......

[cenicsoft]

Bertmod has been distributing binaries.
Problem is either they or I would need a known-working workaround patch...
I don't have a Nov unit to test on.

Looks like someone submitted a patch for the issue - https://github.com/jaketri/bfgminer/commit/6e934507dc10eb1ab9d5fa7918f316a7956aefe3

Discussion here - https://github.com/luke-jr/bfgminer/issues/340

[t1000]

Is something going on with the Block List stats page or do we have any issue with the past 3 discovered blocks?  There are no Block Hashes, Round Duration, Accepted Shares, etc...

It looks like there was a stale Block and the subsequent blocks have no data.   

I think the round timer has stopped working properly too, it keeps incrementing and not resetting when a new block happens.
Payments seem to be added correctly though so no worries.
I'm sure wizkid will fix it when he has time.......

Blockchain.info is showing those blocks we found so hopefully all will be well.

[davebodger]

Is something going on with the Block List stats page or do we have any issue with the past 3 discovered blocks?  There are no Block Hashes, Round Duration, Accepted Shares, etc...

It looks like there was a stale Block and the subsequent blocks have no data.   

I think the round timer has stopped working properly too, it keeps incrementing and not resetting when a new block happens.
Payments seem to be added correctly though so no worries.
I'm sure wizkid will fix it when he has time.......

Blockchain.info is showing those blocks we found so hopefully all will be well.

All looking good in the stats now - thanks wk.

Now, if I didn't have to wait 13 blocks to get my btc.......
(only kidding) 

[mb300sd]

Is there any way to see average shares rewarded for the last day/week/month/couple months? Is the average around 97%? I don't think mine has moved from 97±0.05 in a long time.

[btcspender]

My rejected shares on my oct jup are way higher than my nov jup can anyone enlighten me if the numbers are high/low good/bad or normal?

JupOct      
12 Hours   530.05 Gh/s   5331392 (380)
3 Hours   555.76 Gh/s   1397504 (64)
22.5 Minutes   554.64 Gh/s   174336 (6)
JupNov      
12 Hours   620.74 Gh/s   6243552 (102)
3 Hours   666.02 Gh/s   1674752 (9)
22.5 Minutes   662.96 Gh/s   208384 (0)

[movellan]

Something's going on. Both my miners shut down overnight. They have been chugging along happily since July. Can't connect to the pool. Using BFGminer 381, standard stratum setup. Got to go now, no time to troubleshoot, any ideas appreciated.

Update - Had no time to work on this in the morning, so I set the miners running an alt coin for the day. When I got back from work, they had pulled down 250 alt coins, so the hardware was working OK. Pointed them at Eligius again and everything is working as before. Go figure.

[AbiTxGroup]

I setup a new miner here and modded my payout to .25.  The signed message was accepted and today a second payout is in a queue for a lot less than .25.  Is there something wrong with the payout settings?

My other miner that has been running for a while now, has no problem with the settings that I set.  Just this new setup has the problem.

1st payout was for 0.1178 btc and this one in the queue is at 0.06325440.  Both are above the default minimum, but not close to the .25 that I set.

I dont mind being paid of course, just wondering about the config settings working or not.

[joeventura]

Holy Shit almost 7 hours and 5.59 billion shares, that was a hell of a block!!!