bitcoiner49er
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2014, 02:58:37 PM |
|
using slush's stratum proxy now. purchased this TT 650 W, model SP-650P (someone mentioned a few posts before it worked for them) It says uses single +12v rail. http://www.newegg.com/Product/Product.aspx?Item=N82E16817153173hashing from the last 5 mins. lets see if this lasts. Will also shut down my android phone if it stops now. This one also stops after 5-10 mins (only one green light remain on the cube, fan is still working, but no other lights ON, and can't access the config page). Give me a PSU name and I get that one tomorrow! Corsair **anything** 500-750W. 1000s of them round the world powering ASIC equipment. Corsair CX 500 has been running my cube on high for ~60 days now. Not one problem.
|
Homo doctus is se semper divitias habet
|
|
|
Datastick
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2014, 04:42:21 PM |
|
where can I get one to buy a reasonable price, pls don't tell me ebay?
|
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2014, 05:11:28 PM |
|
where can I get one to buy a reasonable price, pls don't tell me ebay?
Just get them from Amazon.
|
|
|
|
Red_Solid
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2014, 06:43:23 PM |
|
Hello,
I've found a lot of great info to get my cube working on this thread, but still have an issue. The speed of my cube is very slow, but doesn't appear to have any errors. It shows the MHS normally around 08000.
What am I doing wrong?
The command used to start the Proxy is: mining_proxy.exe -o us1.eclipsemc.com -p 3333
Pool points to the server running the Prozy Switch Mode is: Equal Priority (Primary/Backup doesn't appear to work, is this the issue) Clock selected: High Long Poll: inactive
The web portal shows all 0 and no x at that top
Any thoughts?
|
|
|
|
TheGreatWhatsIt
Newbie
Offline
Activity: 27
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2014, 07:49:04 PM |
|
Hello,
I've found a lot of great info to get my cube working on this thread, but still have an issue. The speed of my cube is very slow, but doesn't appear to have any errors. It shows the MHS normally around 08000.
What am I doing wrong?
The command used to start the Proxy is: mining_proxy.exe -o us1.eclipsemc.com -p 3333
Pool points to the server running the Prozy Switch Mode is: Equal Priority (Primary/Backup doesn't appear to work, is this the issue) Clock selected: High Long Poll: inactive
The web portal shows all 0 and no x at that top
Any thoughts?
Look at the white numbers. They should all be 300 or more. If several are 000 your miner is not getting enough work from the proxy. Which means the computer running it is too weak or your network is too slow to keep up with work requests.
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2014, 09:47:13 PM |
|
Look at the white numbers. They should all be 300 or more. If several are 000 your miner is not getting enough work from the proxy. Which means the computer running it is too weak or your network is too slow to keep up with work requests.
Its not that. Try moving the miner in relation to the stratum proxy, specifically to avoid network switches.
|
|
|
|
coreydmjohnson
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2014, 10:59:34 PM |
|
So has anyone figured out how to solo mine with the these ASICMiner cubes? For example, I would like to solo mine a SHA-256 altcoin like this: https://bitcointalk.org/index.php?topic=443108.0Could someone give me a hand so we can solve this together? I'm sure i'm not the only one with a cube who would like to try solo mining some new currency in hopes of reaching the moon... Thanks!
|
|
|
|
IanMac91
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2014, 11:26:50 PM |
|
When I switch it on with one pcie cable in, the light comes on and the fan doesn't.
When I plug the second pcie cable in, the light and fan comes on and it quickly switches off.
In either case, I cannot connect through the router and use it.
I am using a 500w psu connected without a motherboard.
I read 500w was enough. If I bought a better psu, would it definitely work?
|
|
|
|
dayold
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2014, 11:27:55 PM Last edit: February 12, 2014, 11:40:21 PM by dayold |
|
can't seem to get the cube to run on ubuntu 12.04LTS got slush's pool up and running with input -o us1.ghash.io -p 3333 -cu dayold_cube -cp 1 -gp 8332 cube set-up is Pool ports 8332,8332 Pool addresses localhost,localhost (or in my case 192.168.1.3) Miners dayold_dildo,dayold_dildo also for shits and giggles i ran sudo ufw allow 8332 however the cube still returns all 0, and ghash isn't seeing crap... of course as soon as i get it running imma alternate the ceube between ghash and bitminter... if it ever runs ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) EDIT: NVM i'm stupid lol for anyone else with this issue, this is the inpout you need: -oh IP ADDRESS -sh IP ADDRESS -o POOL ADDRESS -p PORT -cu USER -cp PASS -gp 8332 or you can just edit the mining_proxy.py file and put in the parameters under every input's "default=blahblah" field and bing bang bongo
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2014, 11:34:56 PM |
|
When I switch it on with one pcie cable in, the light comes on and the fan doesn't.
When I plug the second pcie cable in, the light and fan comes on and it quickly switches off.
In either case, I cannot connect through the router and use it.
I am using a 500w psu connected without a motherboard.
I read 500w was enough. If I bought a better psu, would it definitely work?
What PSU do you have?
|
|
|
|
divinesnail01
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 12, 2014, 11:41:57 PM |
|
Perhaps this can help someone else.
(snip)
Additionally, I found a Dell Latitude X1 in my "I don't use these but don't want to throw them out" stuff. It's running 2 copies of the slush proxy (one per cube) on 13 watts when the screen is blanked. It's running Windows XP, and peaking at about 70% utilization on the cpu.
(snip)
'snail
I've been doing some experimentation, and I've found that when I run my proxies on a Dell T3400 (core2 quad, 8GB ram) I get about 10% better hash rates than when I run on the X1 laptop. The difference in power consumption is probably significant; next time I have the cubes down for any reason I'll put a watt meter on it and see. 'snail
|
|
|
|
IanMac91
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 12:09:07 AM |
|
When I switch it on with one pcie cable in, the light comes on and the fan doesn't.
When I plug the second pcie cable in, the light and fan comes on and it quickly switches off.
In either case, I cannot connect through the router and use it.
I am using a 500w psu connected without a motherboard.
I read 500w was enough. If I bought a better psu, would it definitely work?
What PSU do you have? It's this thing http://www.ebay.co.uk/itm/360834376354?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
|
|
|
|
IamCANADIAN013
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 01:06:01 AM |
|
When I switch it on with one pcie cable in, the light comes on and the fan doesn't.
When I plug the second pcie cable in, the light and fan comes on and it quickly switches off.
In either case, I cannot connect through the router and use it.
I am using a 500w psu connected without a motherboard.
I read 500w was enough. If I bought a better psu, would it definitely work?
What PSU do you have? It's this thing http://www.ebay.co.uk/itm/360834376354?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649That looks extremely cheap quality to me. Not all 500W power supplies are the same, even if the stats say they are. I've been using a Corsair CX500, works great without issues so far.
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 01:10:10 AM |
|
When I switch it on with one pcie cable in, the light comes on and the fan doesn't.
When I plug the second pcie cable in, the light and fan comes on and it quickly switches off.
In either case, I cannot connect through the router and use it.
I am using a 500w psu connected without a motherboard.
I read 500w was enough. If I bought a better psu, would it definitely work?
What PSU do you have? It's this thing http://www.ebay.co.uk/itm/360834376354?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649Look to the OP for links to real PSUs, this one won't even come close. Trust me I know, I used to sell 100s of them.
|
|
|
|
dayold
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 05:25:16 AM |
|
Ok, so the cube connects to bitminter with no problem, however i can't get it to show up on ghash.io. according to the terminal its running, and the main page says that its crunching numbers. however when i go to my workers at ghash it only shows my bought GH/s and not the cube ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
|
|
|
sweaving
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 05:58:41 PM Last edit: February 13, 2014, 06:47:28 PM by sweaving |
|
Hello all, I have just bought my 1st Asic Cube, i have it setup and running the proxy (on my windows PC)as per descriptions on here, all good so far! but i would like to run in with my Rasp Pi, i have configured the proxy from slush and everything connects ok and the cube starts to run now, my Pis CPU goes to 100% and stays there, and only half the cubes processors run and its producing around 15gh max, can anyone help with this? i have tried to use bfgminer but this simply will not connect! any ideas as i know people are running 4/5 cubes from there pis.
Thanks Steve
|
|
|
|
sweaving
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 08:24:36 PM |
|
Quick update....nailed it! yey... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) i now have 6 x Antminer U1's and 1 asic cube running from my Pi..
|
|
|
|
Apteryx
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 09:24:15 PM |
|
Hello all, I have just bought my 1st Asic Cube, i have it setup and running the proxy (on my windows PC)as per descriptions on here, all good so far! but i would like to run in with my Rasp Pi, i have configured the proxy from slush and everything connects ok and the cube starts to run now, my Pis CPU goes to 100% and stays there, and only half the cubes processors run and its producing around 15gh max, can anyone help with this? i have tried to use bfgminer but this simply will not connect! any ideas as i know people are running 4/5 cubes from there pis.
Thanks Steve
You need to provide more information. Whats the cube setup, what config options are used on the proxy What else is on the network etc
|
|
|
|
stex2009
Legendary
Offline
Activity: 1134
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 11:14:51 PM |
|
Cube now hashes perfectly for 15-20 mins, then 'dead'. Still power issue ?
What have you changed since last time. Is it the same cube that is failing? And I've said it a million times, use slush's stratum proxy. Its so much simpler because in this case you don't know if its BFG. using slush's stratum proxy now. purchased this TT 650 W, model SP-650P (someone mentioned a few posts before it worked for them) It says uses single +12v rail. http://www.newegg.com/Product/Product.aspx?Item=N82E16817153173hashing from the last 5 mins. lets see if this lasts. Will also shut down my android phone if it stops now. This one also stops after 5-10 mins (only one green light remain on the cube, fan is still working, but no other lights ON, and can't access the config page). Give me a PSU name and I get that one tomorrow! Corsair **anything** 500-750W. 1000s of them round the world powering ASIC equipment. [/quote] Perfect. Got the corsair cx modular 750 W http://www.bestbuy.com/site/corsair-cx-series-modular-cx750m-750w-atx-power-supply-black/8324202.p?id=1218872214205&skuId=8324202My cube has been up for 15+ hrs now. It was just the PSU, and I opened and closed my cube atleat 25 times. You guys think I can run 2 cubes with this?
|
|
|
|
|