vlieg
Newbie
Offline
Activity: 59
Merit: 0
|
|
March 07, 2014, 12:14:54 PM |
|
somebody have tips for me to mine ultracoin with smos or bamt or both I have a ready to use SMOS/BAMT for UTC if you're interested. I'm interested, but if there is also a tutorial somewhere i would most appreciate it. Maby i learn a thing of 2 I fear my english isn't sufficient enough to make a good step by step tutorial about compiling cgminer on bamt. Here is the easy way: http://com.moogle.at/SMOS-UTC-Linux1.5-2GB.zipI'll guess you know how you can write this image to the stick, then you just need to edit the /etc/bamt/cgminer.conf to suite your needs and restart mining with /etc/init.d/mine restart EDIT: if someone is interested in writing a good tutorial, I'll put it on the wiki. Many many many tnx. I know how to put it on a stick. I also have seen the tutorial (bottom page 365) but don't know all the updates i need. I first will try yours tomorrow. And than also maby try myself. But linux/ubuntu is still very hard for me.
|
|
|
|
tsjaar
|
|
March 07, 2014, 12:15:38 PM |
|
Official News : Trading will reopen in 3 hours from now on Crypto-trade.com
YES!!! Congrats guys!!
|
WARNING HIGH SPEED - UTC - Ultracoin
|
|
|
dragonmike
|
|
March 07, 2014, 12:19:09 PM |
|
Ermmm guys... Am I doing my math right here? According to what I'm reading here and the following parameters:
6x R9 280x (alledgedly they should hash @ 550Kh/s each?) = 3.3 Mh/s Current difficulty: ~6.5 Block Reward: 50 UTC/BTC rate: ~ 0.00033 BTC/USD rate: ~ 640
...would make me over $100/day !?
I somehow doubt this is correct...
|
|
|
|
Miesling
Newbie
Offline
Activity: 28
Merit: 0
|
|
March 07, 2014, 12:24:27 PM |
|
Ermmm guys... Am I doing my math right here? According to what I'm reading here and the following parameters:
6x R9 280x (alledgedly they should hash @ 550Kh/s each?) = 3.3 Mh/s Current difficulty: ~6.5 Block Reward: 50 UTC/BTC rate: ~ 0.00033 BTC/USD rate: ~ 640
...would make me over $100/day !?
I somehow doubt this is correct...
Nah u get 140kh/s a card not 550 so its 6x 140 = 840kh/s
|
|
|
|
Puycheval
Member
Offline
Activity: 95
Merit: 10
|
|
March 07, 2014, 12:26:08 PM |
|
Ermmm guys... Am I doing my math right here? According to what I'm reading here and the following parameters:
6x R9 280x (alledgedly they should hash @ 550 ~135 Kh/s each?) = 3.3 ~0.81 Mh/s Current difficulty: ~6.5 Block Reward: 50 UTC/BTC rate: ~ 0.00033 BTC/USD rate: ~ 640
...would make me over $100/day !?
I somehow doubt this is correct...
Hash speed for scrypt-jane isn't the same as regular scrypt
|
|
|
|
dragonmike
|
|
March 07, 2014, 12:30:18 PM |
|
I get ~760 on regular scrypt... but I read in this thread somewhere that you could get 550 mining UTC...
|
|
|
|
vlieg
Newbie
Offline
Activity: 59
Merit: 0
|
|
March 07, 2014, 12:30:41 PM |
|
Ermmm guys... Am I doing my math right here? According to what I'm reading here and the following parameters:
6x R9 280x (alledgedly they should hash @ 550Kh/s each?) = 3.3 Mh/s Current difficulty: ~6.5 Block Reward: 50 UTC/BTC rate: ~ 0.00033 BTC/USD rate: ~ 640
...would make me over $100/day !?
I somehow doubt this is correct...
Nah u get 140kh/s a card not 550 so its 6x 140 = 840kh/s You will nog get those high speeds with coins like UTC. because there is an extra factor (the N-factor), you only get 140 instead of your 550 (some have 800+) if you where mining doggie.
|
|
|
|
untalented
|
|
March 07, 2014, 12:31:49 PM |
|
Official News : Trading will reopen in 3 hours from now on Crypto-trade.com
Amazing news
|
|
|
|
cace
Newbie
Offline
Activity: 49
Merit: 0
|
|
March 07, 2014, 12:33:37 PM |
|
|
|
|
|
vlieg
Newbie
Offline
Activity: 59
Merit: 0
|
|
March 07, 2014, 12:34:11 PM |
|
I get ~760 on regular scrypt... but I read in this thread somewhere that you could get 550 mining UTC... I also had a pretty high speed, but wil lots and lots of harware errors, so that was terrible and for 2 weeks wasn't mining much. I doubt any body had 550 with jane scrypts, while 760 with normal scrypt. My english is not real good, and that goes the same for some others. Maby there's a communication error. Think jane scrypt is about 20% or less than normal scrypt.
|
|
|
|
|
Puycheval
Member
Offline
Activity: 95
Merit: 10
|
|
March 07, 2014, 12:37:08 PM |
|
Was a loooooong time ago ! Since then, N factor increased and hash rate sinked.
|
|
|
|
dragonmike
|
|
March 07, 2014, 12:37:46 PM |
|
Ok... oh well Thanks for clarifying!
|
|
|
|
derBruchpilotPro
|
|
March 07, 2014, 12:48:00 PM |
|
Ok... oh well Thanks for clarifying! Never mind that, hash rate is down for everyone, so you get the same amount of coins in relation.
|
NEM/XEM!!!
|
|
|
quarzazatete
Newbie
Offline
Activity: 55
Merit: 0
|
|
March 07, 2014, 12:50:05 PM |
|
so will UTC go to da moon in 2 hours when listed at cryptsy, finally?
|
|
|
|
Uggle
|
|
March 07, 2014, 12:51:26 PM |
|
so will UTC go to da moon in 2 hours when listed at cryptsy, finally?
It is Crypto-Trade that is re-opening in 2 hours.
|
UTC UTC UTC
|
|
|
selachiix
Newbie
Offline
Activity: 4
Merit: 0
|
|
March 07, 2014, 01:00:27 PM |
|
UTC is no longer listed on http://coinmarketcap.com atm This ain't good.. sure hope it's a bug!
|
|
|
|
NickPortland
Member
Offline
Activity: 98
Merit: 10
|
|
March 07, 2014, 01:05:21 PM |
|
UTC marketcap has increased 10fold in the last 2 days, so it's a bug. Seriously are you trolling ? Do you think UTC has marketcap < 83,746$ (100th place)?
|
Official Ambassador for UTC-PND relations *donations here* UTC: Ujff1xrc8brmHkRaFG3BcG5nVScXdh5Wu1 BTC: 159uuxJCfUsG44N52NUsydi2bCNeFSYyTi
|
|
|
longyenthanh
|
|
March 07, 2014, 01:07:57 PM |
|
Hold your coin. Don't sell till it reaches 5$/UTC
|
|
|
|
noobyonekenobi
|
|
March 07, 2014, 01:18:46 PM |
|
Official News : Trading will reopen in 3 hours from now on Crypto-trade.com
Hooray! Finally!
|
PS4 Funds for my brother. Help me get it. Thanks! BTC: 1MqhiNvDfSBRzFuXLkdvUfve4zavoFw2f8 UTC: UdGz8AS2tzTnf5qZ59uYbCRbVqEQJZrQC2 LTC: LTUMKwRAkqtvbyA5s8TeNHduvWk9t3DvkN WDC: WjMWs8GUAyJXXtPJRXQXzJ9yjkda1GBbYs
|
|
|
|