[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[bumface]

I found out the identity of the generous 2 btc donation for cryptsy votes....it was Crypto trade!

and they have found the problem so they will open for trading again very soon  

very nice!!!

yes and they handled the hack very professionally, i think a large number of traders will go back there once they re open

[pieterjanvh]

I found out the identity of the generous 2 btc donation for cryptsy votes....it was Crypto trade!

and they have found the problem so they will open for trading again very soon  

very nice!!!

yes and they handled the hack very professionally, i think a large number of traders will go back there once they re open

Agree, except for communication they couldn't have handled better...

[utclover]

Hello all
Thanks for the cheap coins! i bought after i saw it #1 on cryptsy coin votes. im selling them to you for 0.001 btc in a week. GL and thanks!

Registered at bitcointalk just to tell you

from when i posted this untill now its up 350%

just think about it for a sec ok. i told you when it was 0.001 that it will fall to 0.0001 right?
yes, i was right. now when i told you it will go back up to 0.001. you should believe me ! im a good trader i know things. so just hold  and wait for it to be 0.001. dont sell now. trust me. if you didnt listen to me last time then listen to me this time. hold

we should thank Crypto trade and the additional votes from the community for making it to no.1

yes we should thank the guys that sent 1 btc and 2 btc and the rest that sent to help utc. those are nice people. thanks guys.

i helped a little too by helping push the price up from 0.0001 to 0.0002 by over cutting everyone so that they have to buy from the sell side.
not much but its the least i can do

[pieterjanvh]

Btw guys, should we launch the facebook giveaway while we're in the spotlight?

[azerbaidjan]

What's the average hashrate of a r9 290? i only get about 150 khash/s? is this normal?

does anyone have a copy of the best settings for the r9 290? TIA!

thats about normal, i got around 190 on a 290x

Just curious because I got 165kH/s on my 290x.
Can you share your config details for 290x?
thanks.

Code:

{
"pools" : [
	{
		"url" : "stratum+tcp://ultra.nitro.org:3337",
		"user" : "x.x",
		"pass" : "x"
	},
	{
		"url" : "stratum+tcp://ultra.leetpools.com:3333",
		"user" : "x.x",
		"pass" : "x"
	}
]
,
"intensity" : "18",
"vectors" : "1,",
"worksize" : "64",
"kernel" : "scrypt-jane",
"lookup-gap" : "2",
"thread-concurrency" : "45056",
"gpu-engine" : "1000",
"gpu-fan" : "90",
"gpu-memclock" : "1500",
"gpu-dyninterval" : "7",
"gpu-threads" : "1",

"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388361600",

"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"log" : "5",
"queue" : "1",
"scan-time" : "30",
"scrypt-jane" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

WOW! Much thanks for such config.
I'll try this and optionally send you a few UTCs. What's your wallet ID?

[Miesling]

What's the average hashrate of a r9 290? i only get about 150 khash/s? is this normal?

does anyone have a copy of the best settings for the r9 290? TIA!

thats about normal, i got around 190 on a 290x

Just curious because I got 165kH/s on my 290x.
Can you share your config details for 290x?
thanks.

Code:

{
"pools" : [
	{
		"url" : "stratum+tcp://ultra.nitro.org:3337",
		"user" : "x.x",
		"pass" : "x"
	},
	{
		"url" : "stratum+tcp://ultra.leetpools.com:3333",
		"user" : "x.x",
		"pass" : "x"
	}
]
,
"intensity" : "18",
"vectors" : "1,",
"worksize" : "64",
"kernel" : "scrypt-jane",
"lookup-gap" : "2",
"thread-concurrency" : "45056",
"gpu-engine" : "1000",
"gpu-fan" : "90",
"gpu-memclock" : "1500",
"gpu-dyninterval" : "7",
"gpu-threads" : "1",

"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388361600",

"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"log" : "5",
"queue" : "1",
"scan-time" : "30",
"scrypt-jane" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

WOW! Much thanks for such config.
I'll try this and optionally send you a few UTCs. What's your wallet ID?

UisFWeEn7v6fxBaSmticGdeA6LY7SxdJSV thanks

[vvvortex]

I found out the identity of the generous 2 btc donation for cryptsy votes....it was Crypto trade!

and they have found the problem so they will open for trading again very soon  

very nice!!!

yes and they handled the hack very professionally, i think a large number of traders will go back there once they re open

Yes, I for one will go back.  I love the interface and the speed of trades, as well as the professional way they handled returning coins to people and sucking up the $30K hack.  Kudos!

[azerbaidjan]

What's the average hashrate of a r9 290? i only get about 150 khash/s? is this normal?

does anyone have a copy of the best settings for the r9 290? TIA!

thats about normal, i got around 190 on a 290x

Just curious because I got 165kH/s on my 290x.
Can you share your config details for 290x?
thanks.

There are a few listed here: http://www.reddit.com/r/official_utc/comments/1z93t9/cgminer_configs_for_new_nfactor/

Hmm anyone mining on 290/290x without HW errors?

Code:

--intensity 18 --thread-concurrency 56320  --gpu-threads 1  --lookup-gap 2   --worksize 64 

gives me 174 kH/s for a R9 290, 1035/1250, 8gB w7 rig, catalyst 13.11 beta

UR9XyoSXCJYU639DQjBREkJTeWrcb2sRrF

You should read the whole comments following my post (2-3 pages max) to find best settings because it depends on your system RAM too.

Ok, will do so. I'll let you know what I found out. UTC wallet pls?
Besides, got more than enough RAM to handle the most awkward configs for multiple GPUs.
This should not be a problem.

[dwolfx]

Whales who missed boat trying to push price down atm, dont let them buy cheap coins, everyone just pull your sell orders and jack it up 20% teach jerks a lesson.

[azerbaidjan]

Hello all
Thanks for the cheap coins! i bought after i saw it #1 on cryptsy coin votes. im selling them to you for 0.001 btc in a week. GL and thanks!

Registered at bitcointalk just to tell you

from when i posted this untill now its up 350%

just think about it for a sec ok. i told you when it was 0.001 that it will fall to 0.0001 right?
yes, i was right. now when i told you it will go back up to 0.001. you should believe me ! im a good trader i know things. so just hold  and wait for it to be 0.001. dont sell now. trust me. if you didnt listen to me last time then listen to me this time. hold

0.001 may be the limit for mintpal if no other exchange looms on the horizon.
However I doubt we'll stop only at 0.001 if we hit cryptsy, right?

[pieterjanvh]

Holy crap a big jump in votes for UTC. THANK YOU whoever did that!

Yep, stop feeding BigVern now Wait untill other coins get close... Spend your BTC on UTC

[jetlee]

Stop the dump you dumb!

[SxC]

just shaking off the weak hands we will be over 5k very soon

[longyenthanh]

  stop selling <0.0004 assholes

[Halofire]

price is falling cuz Americans are waking up, seeing the price and selling. we will see 15 again, but once added to cryptsy, will go back up.

[dwolfx]

anyone dumping right now is desperate and lost.

[xwebnetwork]

I've got 6 rigs mining at the moment, all R9 280x's but I have a few more running into this issue:



This is the config I have been having luck with for the others:

Code:

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 12 --gpu-engine 1000 --gpu-memclock 1250 -w 256 -g 2 --auto-fan --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --thread-concurrency 16384

That pulls around 130 per, easily. But for some reason I am encountering a buffer limit as depicted in that image. System has 8GB of Ram and can run fine at 8192 TC on G2 but obviously at a much lower hash. Thoughts? Again, they are Powercolor R9 280x's. Thanks!

[jakoblight]

I found out the identity of the generous 2 btc donation for cryptsy votes....it was Crypto trade!

and they have found the problem so they will open for trading again very soon  

WoW! That was very nice of them!

[Uggle]

HOOOOOOOOOLD! we will soon launch a Mars mission from our ULTRAMOON BASE COMMAND CENTER

[Puycheval]

What's the average hashrate of a r9 290? i only get about 150 khash/s? is this normal?

does anyone have a copy of the best settings for the r9 290? TIA!

thats about normal, i got around 190 on a 290x

Just curious because I got 165kH/s on my 290x.
Can you share your config details for 290x?
thanks.

There are a few listed here: http://www.reddit.com/r/official_utc/comments/1z93t9/cgminer_configs_for_new_nfactor/

Hmm anyone mining on 290/290x without HW errors?

Code:

--intensity 18 --thread-concurrency 56320  --gpu-threads 1  --lookup-gap 2   --worksize 64 

gives me 174 kH/s for a R9 290, 1035/1250, 8gB w7 rig, catalyst 13.11 beta

UR9XyoSXCJYU639DQjBREkJTeWrcb2sRrF

You should read the whole comments following my post (2-3 pages max) to find best settings because it depends on your system RAM too.

Ok, will do so. I'll let you know what I found out. UTC wallet pls?
Besides, got more than enough RAM to handle the most awkward configs for multiple GPUs.
This should not be a problem.

UR9XyoSXCJYU639DQjBREkJTeWrcb2sRrF